Amplifiers ART

Professional active direct box that allows connection of an instrument, line or speaker level signals to a mixer or other balanced input. It features high-impedance single-ended 1/4” and XLR inputs th more→at are buffered and converted by very low-noise active electronics into an isolated balanced low-impedance signal source. It has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output – therefore it delivers a very clean, neutral sound with a wide variety of signal sources and over long signal runs even in high noise environments. Direct box features Input Attenuator switches that allow for a wide range of s…

The Art Splitcom Pro is a durable microphone splitter/combiner that diversifies your signal flow options. If you need to get one microphone input to two separate desks like a front of house mixer and more→a behind stage mixer then the Splitcom Pro is perfect for the task. Or if you need to combine the signals from two mics - great for saving input space - then the unit can be inverted to do just that. Gain all the options you need for routing your signals for any scenario. The Splitcom Pros low distortion means that you wont lose any signal information - giving you a crisp sound output. Its a great utility for your live set up or studio perfect for low impedance microphone signals. The Splitcoms …

The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high perfor more→mance audio isolation transformers. Each of the high impedance single-ended 1/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.
Made in: China
Number of Outputs: 4
Number of Input Port…

Passive noise eliminator. This device easily removes noise without any signal degradation. It has balanced and unbalanced 6.35 mm TRS inputs and outputs. Frequency response: 10 Hz - 50 kHz. Dimensions more→: 114 x 73 x 38 mm. Weight: 0.4 kg
UK/EU Power supply included: No
Type: Noise Reducer
Made in: China

Dual reamping direct box. The DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. E more→ach of the high impedance 6,35 mm and XLR inputs are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments. Frequency response: 10 Hz - 100 kHz. Dimensions: 47 x 117 x 99 mm. Weight: 0,38 …

dimensions 44.5mm x 107mm x 89mm, Input Connections: XLR female balanced, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, thereby isolating two systems and reducing hum and more→ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, totally passive audio interface that uses a pair of high performance transformers to totally separate input and …

DI Box / Desktop

DI Box / Desktop / Number of Channels 1

Dual reamping direct box. The Dual RDB is the ideal interface solution for any application where stereo or dual line level signals from recording interfaces, computers, mixers, iPods, consumer audio o more→r video machines need to be connected to XLR microphone or 6,35 mm instrument level inputs. The unit has two high quality isolation transformers that prevent ground loops when connecting various systems together. Frequency response is 20 Hz - 20 kHz. Dimensions: 47 x 117 x 99 mm. Weight: 0,40 kg.
Number of Input Ports: 4
Rackmountable: No
Made in: China
Type: Splitter;DI Box;Ampbox
UK/EU Power supply included: No
Number of Outputs: 4

Dual-channel phantom power supply for microphones. The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a ru more→gged, compact, and portable unit. Innovative low power circuitry generates the higher voltage necessary for powering microphones while maximizing battery life. Features 2 XLR inputs and 2 XLR outputs, and 7,5 - 12 V AC/DC input. Can be powered with an external power supply or 9 V battery. Dimensions: 48 x 117 x 99 mm. Weight: 0,37 kg.
Made in: China

The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen balanced low impedance microphone signals. Each channel of the S8 provides one direct output and one transf more→ormer isolated output from a single microphone. The S8 includes a ground-lift switch on each isolated output to reduce noise due to ground loops between connected equipment. Frequency response is 20 Hz - 20 kHz. Dimensions: 531 x 178 x 89 mm. Weight: 1,9 kg.
Type: Splitter
UK/EU Power supply included: No
Made in: China