United Kingdom

Amplifiers

 prices on 1024 models  
Show
dimensions 44.5mm x 107mm x 89mm, Input Connections: XLR female balanced, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, thereby isolating two systems and reducing hum and more→ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, totally passive audio interface that uses a pair of high performance transformers to totally separate input and …
PERFORMANCE - Greatly improves headphone sound from any device with a USB output.
VERSATILITY - Connects easily to USB-C ports. (Adapter for USB-A ports also included)
FEATURES - ES9219 more→Sabre DAC chip with Quad DAC+ technology, 32-bitHyperStream III DAC architecture and Time Domain Jitter Eliminator. Also supports Supports hi-res audio up to 32-bit/384kHz PCM, DSD256 and MQA.
HIGH QUALITY - Gold-plated 3.5mm headphone socket, silver-plated copper conductors, twisted for high signal purity.
CONNECTIONS - USB-C Input to 3.5mm Headphone Jack.
INCLUDES, 1 x GO link, 1 x Quick Start Guide, 1 x USB-A to USB-C adapter, 1 x USB-C Charging Adapter 1 x Instruction Card
59.00Buy!
£
Fruugo.co.uk
Delivery: in United Kingdom
Report
Amplifier 24v Power Adapter Ac100-240v To Dc24v 4.5a Power Supply For Tpa3116,. Features: Input Voltage: AC100-240V 1.8A 50/60HZ AC±10% Rated Voltage: DC24V 4.5A Rated Current: 4.5A Max P more→ower: 108W Energy Efficiency Rating: VI Energy Efficiency Working Efficiency: 88% No-load Power Consumption:
58.43Buy!
£
Amazon.co.uk
Delivery: to United Kingdom
Report
Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to more→the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 75 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.
Phantom power adapter that runs on AA batteries and provides powering for electret condenser microphones when phantom power is not available. It features an on/off switch and a bass roll-off filter. C more→onnectors are standard XLR-m to mini XLR-m. It can be used with various Audix microphones, including the ADX20iP, ADX40, ADX60, f90, MicroD, or MicroHP models.
Made in: China
58.10Buy!
£
Muziker.co.uk
Delivery: in United Kingdom
Report
It took Joyo’s engineers two years to develop this patented new product: TheJAMBUDDY Combining guitar playback with its reduced high frequency range due to the sound of 12 inch speakers and also full more→range normal music playback is a difficult task. Some products on the market have already dealt with this issue and they are nice practice boxes that are controlled by hand on a table top. But this is not how guitar players operate their gear, we need our hands free and we stick our gear with our feet. JAMBUDDY combines both aspects, it is a floor based dual channel amp simulator that can be switched with your feet and also accepts a BLUETOOTH signal to play back your favorite backing tracks and so…
57.58Buy!
£
Joom.com
Delivery: in United Kingdom
Report
Features: Passive Preamplifier Active Speaker Volume Controller: precise volume adjustment, no loss, compatible with all types of playback devices and external active speakers. Professional 128mm Fade more→r Switch for Volume Adjustment: the accuracy error of fader switch is small, the left and right channels are synchronized better, and there is no loss of sound details. Compact & Exquisite Size: the volume adjuster with intuitive scale designed makes the desktop volume adjustment more convenient and precise. Plug and Play, Simple Installation: able to be used once inserted, convenient to install, signal source non consumption adjustment, no loss of input and output, perfect for you to enjoy different …
57.50Buy!
£
Muziker.co.uk
Delivery: in United Kingdom
Report
It took Joyo’s engineers two years to develop this patented new product: TheJAMBUDDY Combining guitar playback with its reduced high frequency range due to the sound of 12 inch speakers and also full more→range normal music playback is a difficult task. Some products on the market have already dealt with this issue and they are nice practice boxes that are controlled by hand on a table top. But this is not how guitar players operate their gear, we need our hands free and we stick our gear with our feet. JAMBUDDY combines both aspects, it is a floor based dual channel amp simulator that can be switched with your feet and also accepts a BLUETOOTH signal to play back your favorite backing tracks and so…
57.05Buy!
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Digital-to-Analogue Converter
Balanced Line Output Switch. Palmer PEABO is a Balanced Line Output Switch with two inputs and one output. Thus, it is the perfect choice for routing a signal to either one of two possible inputs. Swi more→tch your vocal mic between the FOH and monitor mixing desk to communicate with the monitor mixer or the band on stage. Two different sound configurations: to switch between different effects or sounds on your microphone, e.g. a "telephone effect" or more levels of reverb. Run the outputs of the PEABO into two channels of the mixing desk, that you can configure differently. Now you can freely toggle between them on-stage at any time. You can also use the PEABO to route the signal to two rooms or …
56.95Buy!
£
Amazon.co.uk
Delivery: to United Kingdom
Report
Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to more→the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 100 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.
56.51Buy!
£
Amazon.co.uk
Delivery: to United Kingdom
Report
Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to more→the amplifier is high enough to prevent damage to the amplifier. Supports amplifiers with up to 300 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.
Microphone preamplifier for connecting up to 2 microphones to one line input of a hi-fi system, an amplifier or a mixer. Stereo or 2 x mono, Wide frequency range, Black metal case, Supplied with plug- more→in PSU.
UK/EU Power supply included: No
Made in: Taiwan
Battery Operation: No
Power Supply: Adapter
55.54Buy!
£
Joom.com
Delivery: in United Kingdom
Report
Features: Support 1 set of power amplifier stereo input, 1 set of speakers stereo output. Easily control the volume of the left/right sound channel of the passive sound box separately. Each channel su more→pports up to 150 watts output. All metal constrution, wellmade, and sturdy for long term use. Easy to install, no external power supply required, plug and play. Specifications: Material: Metal Color: Black Frequency Response: 10Hz50Hz Output Impedance: 416 ohm Speaker Cable Size: maximum 14 AWG Item Size: 15*6.8*5.5cm / 5.9*2.67*2.16in Item Weight: 700g / 24.69oz Package Size: 18.5*13.5*6.5cm / 7.28*5.31*2.55in Package Weight: 800g / 28.21oz Packing List: 1 * Volume Control Box?
54.72Buy!
£
Boxed2me.co.uk
Delivery: in United Kingdom
Report
AMP 2.2 LN - Stereo amplifier with level controlsFor operating small speakers with impedance of 4...8 Ohms (multimedia applications)Can be directly connected to the line or headphone output of a compu more→ter sound cardThe input sensitivity is adjusted using a level adjuster on the front of the housingAudio input and speaker output via a 3.5 mm jack bush (stereo)Robust metal housing with two mounting lugsTypical applications:• Info terminals• Computer screens• ShowcasesDetails
54.00Buy!
£
Fruugo.co.uk
Delivery: in United Kingdom
Report
Digital Power Amplifier Board, 2.1 Channel Stereo Class D. Specifications: Product Name: Bluetooth Digital Power Amplifier Board Bluetooth Version: 5.0 Chip Type: Class D Chip Model: TPA31 more→16D2*2 Supply Voltage: DC12-24V Power Supply Current: Above 5A (not Support Below 5A) Output Channel: 2.1 Channel Output Power: 100W+2*50W (4) Power Efficiency: over 90% Size: 116*73*30mm Installation Size: 110*45mm Installation Aperture: 3mm   Package Including: TPA3116D2 Bluetooth 5.0 Digital Amplifier Board . We are an international based seller that will ship your order from abroad, please at least a minimum 14 working days for delivery right now due to the ongoing de…
Amplifier MONACOR SLA-35
preamplifier, channels: 2, inputs: RCA 1 pairs, external power supply

Passive noise eliminator. This device easily removes noise without any signal degradation. It has balanced and unbalanced 6.35 mm TRS inputs and outputs. Frequency response: 10 Hz - 50 kHz. Dimensions more→: 114 x 73 x 38 mm. Weight: 0.4 kg
UK/EU Power supply included: No
Type: Noise Reducer
Made in: China
53.10Buy!
£
Muziker.co.uk
Delivery: in United Kingdom
Report
The Xvive P1 Portable Phantom Power Supply is a low-noise, 12V / 48V power supply. It runs on an internal rechargeable battery and has enough power to run high-current microphones. The P1 allows you t more→o use microphones and devices that require external power in any setup. The small size, light weight, rugged construction, and exceptionally low noise of the P1 makes it perfect for powering microphones to send a signal to mixing consoles, or any type of processor or recording unit, that does not supply phantom power. Long battery life and a bright LED battery indicator ensure that the microphone is properly powered throughout your recording session. Package Contents: Manual;Charger Made in: China Battery …
51.94Buy!
£
Joom.com
Delivery: in United Kingdom
Report
This kind of DMX512 optical splitter functions as DMX512 distribution amplifier, which is small in size and light in weight that it is easy for you to carry. It is specially designed for connection of more→DMX512 receivers like dimmers, par lights, moving lights, etc. in star configuration It amplifies the DMX512 signal, making the DMX512 data transmission more reliable. With 1000V isolation between input and output and between any individual outputs, each interface also has over-current protection, so all of these will maximize the protection of your console and lighting. Features: MINI SIZE AND LIGHT WEIGHT: Its mini size and light weight ensure that you can carry easily. EASY INSTALLATION: Simple …
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Colour
Device type
Features
Element base
Number of channels
Power per channel (4 Ω)
Power per channel (8 Ω)
Signal-to-noise ratio (Main)
Main input
Release year
more
Signal to noise ratio (line input)
Number of stereo RCA inputs
Line input sensitivity
Adjustments
Features
Inputs
Outputs
Control
Mount size
Width
Depth
Height