Soldering Tools

Soldering iron maintenance and use: 1, iron temperature: it will reduce function when temperature is high, so please low temperature. With strong recover temperature function. Lower temperature weld enough and protect the temperature sensitive components. 2, clean-up: clean soldering iron with cleaning sponge. After welding, iron oxide and iron carbide welding damage it, heat conduction will decrease. Please clean iron oxide to prevent damage and low the temperature. 3, when not use: please keep lower temperature when don't use it, high temperature will generate oxide and reduce thermal conductivity function. 4, after using: clean solder iron after using, plate tin to prevent

A mains powered soldering iron 80w featuring an easy to read digital temperature gauge with a thermostatic control allowing the temperature to be adjusted between 100C - 480C. It comes supplied with 5 interchangeable soldering tips, 30g of solder and a safety stand with integral cleaning sponge. Suitable for use in the workshop and around the home and is ideal for automotive technicians, electricians, jewellers, modellers, hobbyists & DIY.Mains-powered 80w soldering iron, fitted with a 1.2m lead & 230V 13 amp 3 pin BS plug.Supplied with 5 soldering tips, 30g solder, cleaning sponge & safety stand.Features a digital screen with adjustable temperature control.Temperature range: 100C - 480C (212F …

SOLDERING IRON,ST-60 Heat Temperature Max:450°C Output Power:60W

Temperature control dial to set and maintain temperatures from 400 degrees up to 900 degrees Rapid heat up in under 90 seconds Cordless convenience allows you to take the tool directly to the work space Includes: (1) PCL946 18V ONE+ Cordless 120-Watt Soldering Iron, (1) fine point tip, (1) solder coil, and operator's manual

The tool is indispensable for repairing most modern products which are made of plastics. This tool set is suitable for filler welding, hole repairing, and eliminating gaps, repairing horizontal, vertical, long, and short cracks. Thermal cutting: It can be used for hot cutting of plastics rope, flat cutting, and automatic sealing. Comes with 600pcs staple, 100pcs of each model of staple, different shapes of the staple are stored in different boxes, convenient to choose and which can meet your daily use needs. Features: This plastics welding machine can operate quickly and conveniently, improve your work efficiency, and reduce your working time. The welding machine has a built-in front LED light …

Features: 1.Easy to use and carry space saving operation. 2.Easy to adjust the operator to precisely control the temperature and air volume. 3.LCD display hot air temperature, the operator uses handy. 4.No way solder contact pads may dispense parts displacement and thermal shock. 5.Suitable for most surface mount soldering and rework parts for desoldering various shielding box cover board. Details 1.Input voltage: 220 EU Version 2.Frequency: 50 to 60Hz 3.Operating Current 2.5A 4.Power 450W, Condition Temperature-450°C Package including: Brand New High Quality 1 x 220V Hot Air Gun 4 x Nozzle

Length [mm]: 180; Width [mm]: 43; Height [mm]: 25; Quality: Premium; Weight [kg]: 0,108; Shaft diameter [mm]: 3; Rated Power [W]: 6; Operating voltage [V]: 4.5; Operating temperature to [C°]: 420; Required appliance battery: AA (Mignon); Operating Mode: Battery; Weight [g]: 75; Packing Type: Blister Pack

Replacement heater for soldering iron ERSA 150 and 150s 230V with 150 watts.

Features:Portable and lightweight, suitable for heating, soldering and shrinking Unit has 3-in-1 system consisting of soldering iron, butane torch and a flameless heat source Features adjustable heating control ranging up to 1300�C, and is fitted with a retractable stand Powered by Butane (lighter fuel), requires separate ignition Height: 240Width: 85Length: 35

Cordless Hand-held Soldering Gun for Milwaukee M18 18V Lithium Battery Wireless DIY Tools Features: This cordless soldering gun is compatible with Milwaukee M18 18V Lithium Battery. The cordless design makes it easier for you to work, and you can easily take it to any place to use. The Soldering Tool fit solder wire diameter from 0.8~1.2mm. The solder wire can be fed from on the gun. This tool can be use anywhere for home, studio, product manufacturing lines, and more. This is a ingenious design with a solder feeder attached to a soldering Iron. Pull the trigger to adjust how fast you want the spool to come out. When assembled properly, this tool makes soldering a breeze. Widely Used - …

Features: Handheld soldering tool is widely used for soldering circuit boards, home appliance repairing, DIY crafts, etc. Adopts environmental friendly leadfree soldering iron head, effective anti-oxidation, loose tin smooth. High-quality ceramic PTC heating core, quick heating, high efficiency, low energy consumption, long service time. It can be operated with one hand, lighters than traditional soldering machine, simple operation, improve the efficiency of soldering. Ergonomic design handle, comfortable grip. Detachable tin wire holder, easy and convenient to load tin. Specifications: Color: Blue Material: Plastics Input Voltage: 110 V / 220 V(optional) Rated Power: 60W Temperature: 480℃ Ap…

Gas Soldering Iron / Soldering Technique Hard Soldering / min. Temperature 580 °C / Max. Temperature (°C) 625 °C / 125 Watt / 0.165 kg

Soldering Set / Soldering Technique Hard Soldering / Max. Temperature (°C) 800 °C / Gas Cartridge

Burner power: 1.0kW Maximum operating temperature: 1300°C. Gas powered butane. Has a 15ml tank. Piezoelectric ignition - Pressing the button creates a spark that ignites the gas flow. Work in any position at an angle of 360° to work in hard-to-reach places. Has a flame adjustment knob. Ensures safe use by a special button that prevents accidental switching on. Thanks to a stable base, the burner can be safely parked. An additional trigger lock allows continuous operation without holding the trigger. Portable and safe to use.

An exceptionally useful magnetic device that's sure to come in handy when welding any ferrous metal. The Clarke CHT573 square helps to ensure that your welded joints are always accurate. Simply position the magnet and apply the switch to achieve a 90º or 45º angle.

This lightweight, precision Gas torch/soldering kit includes spare tips and solder and is refillable from a standard gas canister and is ideal for computer, in-car stereo systems/alarms etc.

Hot Gas Burner / Soldering Technique Hard Soldering / Max. Temperature (°C) 1,350 °C / 0.16 kg