Amplifiers

Features: It amplifies the DMX512 signal, with electrical isolation between input and output, prolonging the DMX signal transmission distance and making the transmission more reliable. Comes with 1 input, 1 output directly, 8 independent outputs, avoid the system after the class DMX signal interference and destruction and greatly save your setup time and the use of cable. With 1000V isolation between input and output and between any individual outputs, each interface also has over-current protection, so all of these will maximize the protection of your console and lighting. It is specially designed for connection of DMX512 receivers like dimmers, par lights, moving lights in any club, bar,

1. Support reading MP3 songs in TF card and U disk;2. Support adjustment of treble, and master volume;3, Working Voltage : AC 110V-240V(Charging) ,DC 7.4V(lithium battery)4, With AUX Audio input, can be connected to the computer, mobile phone or CD5, Digital amplifier, normal 80w, 160W, drive 2-4 magnetic speakers;6, Dual microphone input(can upgrade wireless mic mode), adjustable reverb; -in Bluetooth.Colour:blackMaterial:ABSPackage Contents:1 * Stereo Amplifier BoardOnly the above package content, other products are not included.Note: Light and different displays may the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Features: It is a mini 2.1 channels power amplifier with LCD display, backlight design. Supports 40W + 40W left and right channel output and a 68W mega bass channel output. Treble, bass, subwoofer, and master volume adjustment buttons for easy operation. Can read U disk and memory card, plug and play, supports BT wireless connection. With remote controller, full-featured remote control is supported. Specifications: Rated Frequency: 20-20KHz Left and Right Channel Power: 40W+40W Subwoofer Channel Power: 68W Resolution: 47K Distortion Rate: 0.4% Signal-to-noise Ratio: 80dB Impedance: 4-8 ohms Material: Aluminum alloy Color: Black Product Size: 12.5*17.6*4.5cm Package Size: 27*21*6.5cm Gross

Integrated Amplifier / Stereo / Output power per channel 50 Watt

Integrated Amplifier / Stereo / Output power per channel 50 Watt

Features: Ultracompact lightweight hum eliminator, has a tough, rugged metal housing. This device breaks the ground loop safely, to remove 60Hz AC hum caused by ground loops. It automatically converts signal(unbalanced to balanced) with no any signal loss, for clear sonic quality. Passive noise canceller can work without battery or external power, convenient to use. 1 XLR/6.35mm channel, 1 XLR/6.35mm channel, 1 RCA channel, 1 3.5mm channel are equipped. Specifications: Material: ABS + Metal Color: Black Product Weight: 450g / 15.87oz Product Size: 11.5*10*3.7cm / 4.52*3.93*1.45in Package Weight: 570g / 20.10oz Package Size: 20*18*5.5cm / 7.87*7.08*2.16in Note: Simultaneous multichannel

This kind of DMX512 optical splitter functions as DMX512 distribution amplifier, which is small in size and light in weight that it is easy for you to carry. It is specially designed for connection of DMX512 receivers like dimmers, par lights, moving lights, etc. in star configuration It amplifies the DMX512 signal, making the DMX512 data transmission more reliable. With 1000V isolation between input and output and between any individual outputs, each interface also has over-current protection, so all of these will maximize the protection of your console and lighting. Features: MINI SIZE AND LIGHT WEIGHT: Its mini size and light weight ensure that you can carry easily. EASY INSTALLATION:

Features: 1.Precise cuts and interfaces ensure perfect fit, fit for mounting position and easy to install. 2.The product uses high quality materials, effectively avoid corrosion and wear out, and durable. 3.Professional chip set provides superior performance in the system. 4.Easy to operate, anti-aging, and extended service life. 5.On-board dial potentiometer to adjust the volume output. Specifications: Material: ABS Color: As picture shown Size: Approx. 5*4*2.5cm/2*1.6*0.98in Onboard TDA7297 audio power amplifier chip, dual channel 15W+15W, suitable for 4-8 ohm 10-50W speakers; The main pin of the chip has been taken out, convenient for external device control. The onboard 2 channel 5.08 (mm) …

Features: 1¡¢The waterproof 4 pole speaker plug jacket is suitable for cables with a diameter of 6~15mm, which is fully in line with the industry standard for speaker connection 2¡¢Humanized locking design with chuck type stress release, accurate and reliable twist lock latch system is easy to operate 3¡¢The speaker plug has an extremely reliable and sturdy cable connector with a reliable locking system 4¡¢The product contact with the screw terminals firmly, including multi strand protection, and solder terminals 5¡¢The audio connector has a continuous rated power of 30A rms, nickel plated brass contacts possess good electrical conductivity, reliable connection, used in plug ins and shells to …

Collingwood PR3011 350mA RGBW/RGB Power Repeater

DI Box / Desktop / Number of Channels 2

Features: Support 1 set of power amplifier stereo input, 1 set of speakers stereo output. Easily control the volume of the left/right sound channel of the passive sound box separately. Each channel supports up to 150 watts output. All metal constrution, wellmade, and sturdy for long term use. Easy to install, no external power supply required, plug and play. Specifications: Material: Metal Color: Black Frequency Response: 10Hz50Hz Output Impedance: 416 ohm Speaker Cable Size: maximum 14 AWG Item Size: 15*6.8*5.5cm / 5.9*2.67*2.16in Item Weight: 700g / 24.69oz Package Size: 18.5*13.5*6.5cm / 7.28*5.31*2.55in Package Weight: 800g / 28.21oz Packing List: 1 * Volume Control Box?

Integrated Amplifier / Stereo / Output power per channel 160 Watt

Raise your amp off the stage and tilt back for improved monitoring and increased projection. Load Capacity: 68 kg Colour: Black Made in: China Material: Steel