Amplifiers

US Series Compact 100V Slave Amplifiers100V slave amplifiers built into a half width 1U housing. In addition to RCA line input and output, the US amplifiers have a 100V input on removable screw terminals, which enables the amplifier to be connected in parallel with existing 100V speakers to extend the system. Mono output to either 100V line or an 8 ohm speaker load is connected via a separate removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.DetailsPower supply 170-264Vac, 50Hz (IEC)Inputs Line (RCA),…

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen balanced low impedance microphone signals. Each channel of the S8 provides one direct output and one transformer isolated output from a single microphone. The S8 includes a ground-lift switch on each isolated output to reduce noise due to ground loops between connected equipment. Frequency response is 20 Hz - 20 kHz. Dimensions: 531 x 178 x 89 mm. Weight: 1,9 kg.
UK/EU Power supply included: No
Type: Splitter
Made in: China

The Radial StageBug SB-4 is a compact active direct box that has been optimized for use with piezo transducers. This enables violin, dobro, mandolin, cello, upright bass and other instruments that are best amplified using a piezo to be connected without compromising the tone or frequency response. The design begins with a 1/4 "" input for the instrument pickup. Unlike typical direct boxes that have a 1meg-ohm input impedance, the SB-4 features a very high 5meg-ohm impedance that smoothes out troublesome peaks that give piezos a bad name. The higher impedance also broadens the frequency response for a more natural and pleasing sound. The active circuit performs the high-to-low impedance conversion …

The S.M.S.L A50 uses a 2-chip TI digital amplifier TPA3116.
With the new Bluetooth 5.0 technology, it has both low power consumption and high sound quality.
Audio adjustment, individually adjustable highs and lows. Electronic volume control, eliminating noise from potentiometer volume adjustment.
Pop control circuit, no pop sound when switching on and off. Powerful power adapter for dynamic audio response.
Extremely small footprint for greater flexibility in placement. High quality remote control with full functionality. Your purchase comes with a one year warranty. If you have any problems with your product, please feel free to ask us. We will do our best to provide you with the best possible …

Styled after the iconic Laney Ironheart range, the Laney Ministack is a small amp with a big sound, Bluetooth enabled and perfect for anywhere in the house, backstage or practice. The Ministack-B-Iron model features a clean & drive channel, gain, tone and volume dial, guitar input, Aux in, On-board tape style digital delay with level control, headphone socket and the unique Laney LSI – Laney Smartphone Insert. The LSI allows you to connect your amp to your favourite guitar tone generating app to access all your favourite guitar tones.
Battery Operation: Yes
Controls: Volume;Tone;Level;Gain;Delay Level;Drive;Delay
MP3 / Line In: Yes
Headphone Output: Yes
Bluetooth: Yes
UK/EU Power supply …

All-tube 10W guitar combo amplifier from AC10 Custom series that is a reproduction of the original AC10, one of the first amplifiers to bear the VOX name that has long been adored for his ability to achieve rich, articulate tube tone at very manageable volumes. More portable than the AC15 and more powerful than the AC4, the combo features the classic Top Boost tone circuit that provides an array of classic and modern tones. Now equipped with reverb and a master volume, it is the perfect companion for the home, studio or stage. The Top Boost tone can be further adjusted via Gain, Bass, Treble, Reverb and Volume controls. The combo is equipped with two 12AX7 and one EL84 tube, and a 10” Celestion VX…

48 V phantom power supply for 2 electret microphones or microphone cartridges. Power supply: ~ 230 V/50 Hz/10 VA, Conectors: 2 x XLR input (bal.)/2 x XLR output (bal.), Admiss. ambient temp.: 0-40 °C, Dimensions: 180 x 50 x 145 mm, Weight: 1.179 kg
Made in: Taiwan

Focusrite Clarett OCTOPRE is an 8-channel microphone preamplifier and AD / DA converter with ADAT digital interface. Clarett's leading preamplifiers operate at 24 bit / 192 kHz and offer a dynamic range of up to 118 dB. AIR technology, which adds airiness and clarity to recordings, emulates the impedance and resonance characteristics of the legendary Focusrite ISA analogue studio preamplifier. Two analog inputs located on the front panel are capable of processing both microphone and direct instrument (Hi-Z) signals.

The transmitter has eight analog inputs with combined XLR / TRS connectors. Each input channel is equipped with insertion points for connecting external processors. The signal can …

The Radial JDI is a passive direct box designed to handle extreme signal levels without distortion of any kind. Unlike an active DI that is limited by the buffering amplifier’s rail voltage, the JDI employs a Jensen audio transformer as the engine. Jensen transformers are legendary in their ability to gracefully handle transients while delivering a smooth, warm sounding Bessel curve, reminiscent of the finest vintage gear. Ruler flat from 10Hz to 40kHz and with virtually zero phase deviation, the JDI delivers the natural, pure sound of the instrument without artifact. The 100% passive circuitry inside the JDI is incredibly efficient. The transformer performs both high-to-low impedance conversion an…