Amplifiers

IWA In-Wall Amplifiers with BluetoothStereo amplifier units for background music and public address in a minimalist housing for installation into cavity walls and ceilings. Class-D amplifier design operates cleanly and efficiently with minimal heat dissipation, combined with an internal digital switch-mode power section, which enables easy connection directly from the local mains supply. Bluetooth compatibility enables wireless streaming of audio files from a smart phone or other enabled device in addition to 3.5mm Aux input and an optical digital audio input, ideal for integrating into A-V systems. For discreet and trouble-free installation without any need for table-top or cabinet installation,…

Portable 6 W combo amplifier / monitor for electric guitar, which provides an excellent sound reference for the music you create. It connects directly to the guitar using a rubber suction cup and is powered by a built-in rechargeable lithium-ion battery, which allows 3.5 hours of operation on a single charge. It is equipped with a 40 mm speaker with a neodymium magnet and offers presets of guitar DSP effects - Phaser, overdrive and reverb. The amplifier is made with a plastic ABS cover and a flexible rubber outer cover with a suction cup. The package also includes a micro USB cable for charging the internal battery and a 6.3 mm-3.5 mm mono guitar cable for connecting the device to the instrument.…

Whenever you need more headroom for any microphone in your podcast, recording studio or stage setup, the MIC BOOSTER CM-2 is exactly the tool you need to get a crisp and clean microphone signal in a robust and simple to use package. Both channels of the CM-2 can work with almost any dynamic or passive ribbon microphone. Its high-quality preamp adds an incredible +25dB of gain to your mic pre’s which increases headroom and allows you to dial in the perfect mic level at a much lower gain setting at the mixer thus leading to a cleaner sound. The simplicity and size of the CM-2 means you can set it up as close as possible to any mic anywhere in your studio or on stage. This minimizes the risk …

Passive noise eliminator. This device easily removes noise without any signal degradation. It has balanced and unbalanced 6.35 mm TRS inputs and outputs. Frequency response: 10 Hz - 50 kHz. Dimensions: 114 x 73 x 38 mm. Weight: 0.4 kg
Type: Noise Reducer
Made in: China
UK/EU Power supply included: No

Lindy TosLink (Optical) and Coaxial Bi-directional Converter

Microphone Pre-Amp / Desktop

DI Box

The BOSS BAS-1 Amplifier Stand cradles your favorite combo guitar amp at the perfect angle for monitoring and sound projection, whether at home, on stage, or in the studio. Constructed with heavy-duty steel for long-lasting durability, the BAS-1 features an adjustable tilt-back design and a telescoping support arm that accommodates a variety of cabinet widths. The stand collapses for easy travel, with a locking cam and quick-release lever for fast set up and tear down. And with adjustable feet, you can achieve wobble-free stability when using the BAS-1 on slightly uneven surfaces.
Load Capacity: 21 kg
Colour: Black
Weight: 4,1 kg
Maximum Height: 520 mm
Height (cm): 52.0
Package Contents: Manual<…

Stereo headphone amplifier. 4 separate headphone amplifiers in one housing. 1 level control each per amplifier. 6.3 mm stereo input. 6.3 mm stereo outputs. Frequency range: 20 - 20000 Hz. Input signal: 300 mV. Output signal: 2 x 16 mW/8 Ohm, 2 x 35 mW/32 Ohm, 2 x 15 mW/600 Ohm (per headphone). S/N ratio: 64 dB. THD: 0,1 %. Power supply: via encl. plug-in power supply. Dimensions: 117 x 93 x 40 mm. Weight: 560 g. Colour: Black
Impedance: 32 Ohm
Number of Channels: 4
Outputs: Headphone Jack 6,3mm
Colour: Black
Headphone Output: Yes
Power Supply: Adapter
UK/EU Power supply included: Yes
Battery Operation: No
Frequency Range: 20 Hz - 20 kHz
USB: No
Inputs: Jack TRS 6,3mm
Made in: China…