Submersible (Drainage) Pumps Clarke

With a stainless steel body, cast iron base and powerful 1530W motor offering an impressive 500 l/min flow rate, the CSP1530 Sewage Pump can pump clean and dirty water including solids with a diameter up to 50mm. This sewage pump is ideal for DIY or trade purposes to use in pits, trenches, tunnels and water tanks with slurry.

A heavy duty submersible pump suitable for draining pits, sumps, ditches, footings etc. Can be used for both clean and dirty water applications including water with particles upto 35mm dia. Includes a fitted float switch for automatic water level control. Stainless steel pump body & motor case.

Suitable for pumping both dirty and clean water, the HSE 130 is ideal for pools & fish pond water circulation* and aeration, ground, rain and flood water drainage, creating waterfalls & fountains in water features, garden irrigation and sump pits waste water drainage. Robust build quality with a cast iron base, it has a built in strainer allowing it to pump small solids in suspension.

Ideal for heavy duty draining applications including pits, sumps, ditches, footings etc. Shifts both clean and dirty water including particles upto 35mm dia. Fitted with a float switch for automatic water level control. The stepped adaptor fitting allows for connection of 32 mm (1¼”), 25 mm (1”), or 19 mm hoses which should be secured with a hose clamp.

Clarkes top quality submersible pump handles both clean and dirty water. Robust build, and a heavy duty impellor means the CSV2A Vortex Pump will not only handle dirty, brackish water, it's also able to pass solids up to 30mm diameter. And, even better, it's fitted with an automatic float switch, a simple yet clever device that switches the pump on as the water level rises, and switches it off once the pump has done it's job and reduced the water level.

Designed to pump clear water from ponds & pools. Suitable for operating waterfalls, fountains, irrigating gardens and draining cellars, sinks, cisterns & baths. Includes a fitted float switch for automatic water level control. Stainless steel pump body.

Suitable for moving dirty water & clean water. Ideal for pools, fish pond circulation*, rain water drainage, waterfall fountains, garden spraying, sump pits and waste water drainage. Features a robust cast iron base. Includes filter base, outlet connector and 10m of heavy duty HO7RNF cable.

Ideal for heavy duty draining applications including pits, sumps, ditches, footings etc. Shifts both clean and dirty water including particles upto 35mm dia. Fitted with a float switch for automatic water level control.

Clarkes powerful and rugged industrial quality submersible pump has a stainless steel drive shaft and chrome plated body, plus a 50mm (2") diameter outlet.

This domestic submersible pump is ideal for clearing flooded cellars, trenches, flat roofs, swimming pools etc. and is very popular for creating fountains, waterfalls and ornamental ponds.

This Heavy Duty Submersible Sewage Pump is suitable for draining waste & clean water or sewage containing solid bodies up to 31mm, whilst the float switch automatically turns the pump off when the water level drops.

With a stainless steel body and unique water cooling system the CPRP560 Residue Water Pump can be used for both clean and dirty water applications. This pump can shift water containing particles up to 7mm dia and features the ability to clear residue water down to 1mm making it ideal for removing water from floors, low level pools and puddles.

Suitable for pumping both clean and dirty water. Ideal for pools, fish pond circulation*, rain water drainage, waterfall fountains, garden spraying, sump pits and waste water drainage. Features a robust cast iron base. Includes filter base, outlet connector and 10m of heavy duty HO7RNF cable.

This domestic submersible pump is ideal for clearing flooded cellars, trenches, swimming pools etc. and is very popular for creating fountains, waterfalls and ornamental ponds.

A heavy duty submersible pump suitable for draining pits, sumps, ditches, footings etc. Can be used for both clean and dirty water applications including water with particles upto 35mm dia. Includes a fitted float switch for automatic water level control. Stainless steel pump body.

With a stainless steel body and powerful 830W motor offering an 180 l/min flow rate and a lift height of 20m, the CHHDP830 High Head Draining Pump can pump clean and dirty water including solids with a diameter up to 8mm. This draining pump is fitted with non-clogging vortex impeller and offers high-lift waste water transport, making it ideal for DIY or trade purposes to use in pits, trenches, tunnels and water tanks with slurry.

Suitable for pumping both dirty and clean water. Ideal for pools, fish pond circulation*, rain water drainage, waterfalls, fountains, garden spraying, sump pits and waste water drainage. Features a robust cast iron base. Includes filter base, outlet connector and 10m of heavy duty HO7RNF cable. Please note - the image used shows the HSE360A with float switch. This is used for illustrative purpose only. (HSE360 DOES NOT come with float switch)

Clarke's truly heavy duty, industrial quality submersible dirty water cutter pump benefits from a corrosion resistant stainless steel drive shaft and body. It also has a sharpened, tungsten carbide cutter plate to chop and reduce any water borne sewage or vegetation. This enables the HSEC650A pump to happily pump dirty water, even sewage water, all day long and for cost-conscious, economic operation it’s also switched on and off automatically, thanks to the inclusion of a simple but effective float switch - as the water level rises this activates the pump, and turns it off once desired water level has been reached.

This PSV7A Clarke Water Pump is ideal for draining surface water including flooded cellars, sumps etc. Ideal for pumping clean and dirty water and features fold down legs/base to pump water containing solid bodies up to 30mm in diameter or surface water. Adjustable position float switch automatically turns the pump off when water level drops

Clarke's Submersible Puddle Pumps are designed for draining surface water, spilled water and flood water from domestic appliances. Ideal for pumping out waste water from flooded areas, cellars & sumps too. The puddle pumps are incredibly useful for clearing particularly shallow bodies of water because of their ability to pump within a matter of a few millimetres off the floor.

This self-priming pump can be used for continuous running and provides top quality general duty for clean water pumping. The strong, durable, double insulated case offers a tough corrosion and rust proof construction. This Clarke pump also benefits form a low consumption motor with overload protection and an anti-airlock valve, complete with a long life ceramic shaft for reliability.

Ideal for agricultural and industrial use, this heavy-duty pump can handle heavily polluted waste water containing light slurry, sewage and waste solids up to 40mm diameter. This heavy duty cutter pump features automatic shutdown when the water level drops and thermal cut-out overload protection, complete with the Twin seals, TCT cutting plate and steel waste cutter.

Designed particularly for heavy duty applications, this robust, powerful water pump is ideal for rapidly shifting both clean and dirty water; in fact, it will move solid water borne objects up to 30mm in diameter! Therefore it's ideal for draining pits, sumps, ditches and footings etc. It's made from tough, durable corrosion proof materials and has a really reliable & low power consumption 230V motor for cost effective long term use. It's also fitted with a float switch for automatic water level control and an anti-airlock valve too.

Clarkes truly heavy duty, industrial quality submersible pump benefits from a corrosion resistant stainless steel drive shaft and body. It also has a sharpened, tungsten carbide cutter plate to chop and reduce any water borne sewage or vegetation. This enables the HSEC651A to happily pump dirty water, even sewage water, all day long and for cost conscious, economic operation, it’s also switched on and off automatically, thanks to the inclusion of a simple but effective float switch – as the water level rises this activates the pump; and turns it off once desired water level has been reached.