Submersible (Drainage) Pumps Clarke

For demanding drainage tasks where space is limited, Clarke’s PSV5A submersible pump pairs a 750W motor with an integrated float switch to help control pumping in confined areas. Designed for heavy duty work around pits, sumps, ditches and footings, it can be used with clean or dirty water and handles particles up to 35mm in diameter. Operation can be set to manual or auto mode. In auto mode, the integrated float switch turns the motor off once the water level drops to a defined level, supporting unattended draining. A rated maximum flow rate of 217 l/min combines with a minimum/maximum head of 0m/8m, and the pump is suitable for a maximum immersion depth of 7m. Flexible positioning is supported by…

For demanding drainage tasks, Clarke International’s PSV3A dirty water submersible pump is built for use in pits, sumps, ditches and footings where dependable water removal is required. It moves clean or dirty water and handles particles up to 35mm diameter, making it well suited to tougher site conditions. Power comes from a 400W, 230V induction motor with overload protection, while the float switch provides automatic water level control. A 1 1/2” BSP threaded outlet supports straightforward connection, with a stepped adaptor fitting for 32 mm (1 1/4”), 25 mm (1”), or 19 mm hoses, secured with a hose clamp. An integral carry handle helps when moving the pump between jobs. Key features Max flo…

When water needs shifting from low points and shallow pools, Clarke’s PSP195 submersible puddle pump is designed to work close to the floor. Built for draining spilled and flood water, it also suits waste water removal from flooded areas, cellars and sumps where rapid clearance is required. Driven by a 600W, 230V mains-powered motor, it delivers a maximum flow rate of 195 litres per minute with a maximum head height of 9 metres. For thin residual water, it pumps down to 3mm from the floor. A 10.00m cable supports flexible positioning, while the 1¼” BSP outlet is supplied with a 1” and ¾” multi-step hose adapter for straightforward hose connection. Key features - Pumps down to 3mm from the f…

Fast, low-level water removal calls for a pump that can clear down close to the floor. Clarke’s PSP125B submersible puddle pump is designed for flooded cellars, sumps and similar areas where water needs shifting efficiently. Powered by a 400W 230V mains motor, it delivers a rated maximum flow rate of 116 litres per minute. An integrated auto sensor starts pumping when water is detected and stops as the level drops to help reduce the risk of running dry. A 3 position auto sensor allows the remaining water level to be set, with removal down to as low as 1mm from the floor. Connection is via a 1.5" BSP outlet, supplied with an additional non-return valve and a 3 step outlet adaptor for common ho…

With a stainless steel body, cast iron base and powerful 1530W motor offering an impressive 500 l/min flow rate, the CSP1530 Sewage Pump can pump clean and dirty water including solids with a diameter up to 50mm. This sewage pump is ideal for DIY or trade purposes to use in pits, trenches, tunnels and water tanks with slurry.

With a stainless steel body and unique water cooling system the CPRP560 Residue Water Pump can be used for both clean and dirty water applications. This pump can shift water containing particles up to 7mm dia and features the ability to clear residue water down to 1mm making it ideal for removing water from floors, low level pools and puddles.

The Clarke CPCDP500 Contractor Dewatering Pump offers a robust and portable design, suitable for DIY and Trade purposes in pits, trenches, tunnels and water tanks with slurry. This pump is fitted with a 500W motor, offering a 240 l/min flow rate, designed for shifting clean and dirty water including solids up to 7mm. The CPCD500 is manufactured with a stainless steel drive shaft, impeller and base plate ensuring a longer life time, plus it is completed with a convenient carry handle for easy transport.

This water pump provides a simple means to extract water from butts and can be used with chlorinated swimming pool water. An ideal garden tool the CWBP300 can be adjusted in length for use with butts of different sizes and its 3/4'' BSP threaded outlet has a quick fit hose connection. Completing this tool is a reliable build and a powerful 400W for optimum performance.

The CSE400A submersible water pump is manufactured from tough, durable corrosion proof materials and is ideal for a wide range of clean water pumping applications. It's fitted with a float switch for automatic water level control, has a low consumption electric motor with overload protection and an anti airlock valve. This compact unit is ideal for use as a water butt pump in hosepipe ban areas allowing you to use collected water for irrigation, car washing etc. The float switch will turn the pump off when the water reaches a predetermined level to avoid damage to the pump.

With a stainless steel body and powerful 830W motor offering an 180 l/min flow rate and a lift height of 20m, the CHHDP830 High Head Draining Pump can pump clean and dirty water including solids with a diameter up to 8mm. This draining pump is fitted with non-clogging vortex impeller and offers high-lift waste water transport, making it ideal for DIY or trade purposes to use in pits, trenches, tunnels and water tanks with slurry.

With a cast iron body and powerful 870W motor, the CGP870 Grinder Pump is the ideal pump for the grinding and disposal sewage and waste water. The pump body is protected by a durable dual-layer coating to avoid any risk of leaks. Plus, the pump also features thermal cut-out overload protection.

Designed to pump clear water from ponds & pools. Suitable for operating waterfalls, fountains, irrigating gardens and draining cellars, sinks, cisterns & baths. Includes a fitted float switch for automatic water level control. Stainless steel pump body.

A heavy duty submersible pump suitable for draining pits, sumps, ditches, footings etc. Can be used for both clean and dirty water applications including water with particles upto 35mm dia. Includes a fitted float switch for automatic water level control. Stainless steel pump body & motor case.

A heavy duty submersible pump suitable for draining pits, sumps, ditches, footings etc. Can be used for both clean and dirty water applications including water with particles upto 35mm dia. Includes a fitted float switch for automatic water level control. Stainless steel pump body.

Ideal for heavy duty draining applications including pits, sumps, ditches, footings etc. Shifts both clean and dirty water including particles upto 35mm dia. Fitted with a float switch for automatic water level control.

This PSV7A Clarke Water Pump is ideal for draining surface water including flooded cellars, sumps etc. Ideal for pumping clean and dirty water and features fold down legs/base to pump water containing solid bodies up to 30mm in diameter or surface water. Adjustable position float switch automatically turns the pump off when water level drops

This PSV6A Clarke Water Pump is ideal for draining surface water including flooded cellars, sumps etc. Ideal for pumping clean and dirty water and features fold down legs/base to pump water containing solid bodies up to 30mm in diameter or surface water. Adjustable position float switch automatically turns the pump off when water level drops

The Clarke PSP105 Puddle Pump features a 250W motor with Auto sensor. It is ideal for draining flooded cellars, sumps etc and clearing spillages, thanks to the low 1mm suction depth. This Puddle Pump also features a 3 position auto sensor which allows a remaining water level to be set, or can be used as a continuous duty pump without the plug in sensor. Note: Suitable for use with clean water only

Clarke's CSV4A 1300W Submersible pump with float switch is an electric powered water pump that is perfect for draining and transferring water in many different situations, with its massive 417L /min flow and 11m Max. head. Examples of use include draining cellars and basements, ditches, footings etc. Note: Suitable for use with clean water or dirty water.

Clarkes top quality submersible pump handles both clean and dirty water. Robust build, and a heavy duty impellor means the CSV2A Vortex Pump will not only handle dirty, brackish water, it's also able to pass solids up to 30mm diameter. And, even better, it's fitted with an automatic float switch, a simple yet clever device that switches the pump on as the water level rises, and switches it off once the pump has done it's job and reduced the water level.

This self-priming pump can be used for continuous running and provides top quality general duty for clean water pumping. The strong, durable, double insulated case offers a tough corrosion and rust proof construction. This Clarke pump also benefits form a low consumption motor with overload protection and an anti-airlock valve, complete with a long life ceramic shaft for reliability.

High power (750W) efficient submersible water pump with float switch. Benefiting from a big 208 litres per minute output and on/off float switch that can be set to operate or be turned off, for continuous duty. This submersible water pump is perfect for draining and transferring water in many different domestic situations. Examples of use include draining cellars and basements, flooded boats, pits, pools etc. It could also be used with the float switch disabled to drain blocked sinks or baths. Note: Suitable for use with clean water only

This water pump has been constructed with a corrosion resistant stainless steel casing and cast iron base for long reliable service. This heavy duty 110V submersible pump is suitable for use with clean or dirty water. Ideal for draining ponds, pools and building excavations with a float switch to automatically turn the pump off when the water level drops.

Heavy duty submersible pump suitable for use with clean or dirty water. Ideal for draining ponds, pools and building excavations.