Amplifiers

Dual channel level converter. The CLEANBoxPro provides two channels of unbalanced to balanced level conversion and two channels of balanced to unbalanced level conversion in a rugged, compact, and portable unit. Balanced lines offer increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used. Each section has stereo level controls to optimize signal levels. An LED indicator lights when power is applied. Frequency response: 20 Hz - 20 kHz. Comes with external power supply. Dimensions: 47 x 117 x 109 mm. Weight: 0,5 kg. Made in: China

The Topping PA5 MKII Plus is a first-rate compact power amplifier building on the superb quality of the PA5 MKII but with enhanced power capacity. It provides up to 140W at four ohms and 85W at eight ohms per channel. Built with a fully balanced structure and an efficient Class D amplifier circuit the PA5 MKII Plus eliminates unwanted hum and noise to magnify any stereo speakers. With distortion levels measured as low as 0.0003 per cent (eight ohms at five watts) a frequency response of 20Hz - 40kHz and a 124dB dynamic range the PA5 MKII Plus effortlessly produces crystal-clear audio for an excellent listening experience. This power amplifier boasts RCA and TRS inputs enabling easy connectivity …

The new NFCA amplifier circuit is specifically designed for portable amplifiers. The low idle power consumption allows for extended battery life. This is done while having 0.00007% THD+N and 135dB SNR. It's powerful and clean enough for power-hungry full-sized headphones and sensitive IEMs. The NX7 can output 180mW of high power under a load of 300 ohms, and with the help of 3 step gain setting, the small body can easily beat the full-sized headphones. It is worth mentioning that even when the output is 200mW, the load distortion is only 0.00008%. The low gain of NX7 is -13.8dB. When used with high-sensitivity in-ear headphones, there will be almost no trouble of potentiometer bias in the

Aluminum alloy CNC machining process： Using anodizing technology, fine workmanship, Good touch! Qualcomm Bluetooth 5.0 receiver, support APT-X：Better sound quality, longer transmission distance! APT-X Lossless music transfer： Low latency, good fault tolerance, high sound quality! Powerful bass pre- amp output： The output is adjustable from -30~+10dB, used to connect with a far- subwoofer speaker to form a 2.1 audio system! 2 separate high-power digital power amplifier chips 230W×2（4Ω） ：Use two separate digital power amplifier chips, output 230W per channel at 4 ohms, easy to drive most speakers! Electronic volume control chip NJW1195： Japan's NJRC company electronic

Integrated Amplifier / Stereo / Output power per channel 100 Watt / 3.5mm-In / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

Headphone Amplifier / Total Connected Load 40 W / Number of Channels 1

Mini-size 100W high fm output power CB Power: 100W Turn on/off switch Automatic receive/transmit switch Electrode Frequency Range: 3-30MHz Operate Voltage: 12-14Vcc Input Current: 14-20A Input Power: 1-5W Input Power SSB: 2-10W FM Output Power: Max.100W AM Output Power: Max. 150W Output Power SSB: Max.300W Working Mode:FM-AM-CW-SSB Fuse: 2 x 12A Material: Metal colour: As shown Package Contents: 1 x CB Radio Power Amplifier(-300PLUS) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Features: Particularly powerful with full 150W + 150W amplifier. 10 channels with XLR and Line mono inputs. 2-band EQ (HI & LOW) on each channel and 5-band graphic equalizer on the main. Built-in 16 kinds of LCD display digital effects. Built-in 48V phantom power for condenser microphone use. With USB & SD/ MMC Card input interface and LCD display. With speaker outputs(L & R) and main XLR outputs (L & R). Great for DJ, stage and karaoke to have a perfect sound effects. Specifications: Color: Dark blue Material: Metal Power adapter: US Item size: 46.5 * 31 * 13cm / 18.3 * 12.2 * 5.1in Item weight: 7.2kg / 15.9lb Package size: 51 * 37.5 * 18cm / 20.1 * 14.8 * 7.1in Package weight: 8.1kg / 17.…

Phono Preamplifier

Microphone Pre-Amp / Desktop / Number of Channels 1

Brand new NFCA discrete amplifier ▶️ The newly developed NFCA discrete power amplifier reaches a new level of pristine sound processing and reproduction. B200, with its unprecedented 200W performance, will bring you pure auditory enjoyment. Three sets of XLR/TRS balanced inputs ▶️ To utilize the balanced composite interface and construct a balanced playback system, ensure the simultaneous use of two B200 units. 200W output power ▶️ B200 has a powerful output power of 200W, which can meet the needs of more kinds of speakers. B200 provides high/low gain options. You can flexibly choose the appropriate gain according to different environments and equipment requirements.

Headphone Amp / 1x S/PDIF IN (TOSLINK Optical) / Max Sample Rate 768 kHz / Bitrate 32 bit / DLNA Network Function / Bluetooth / Streaming Service Tidal

Superior Audio Quality : The fully balanced class D amplifier design with dual MA12070 chips and low THD+N levels provide pristine, distortion-free audio even at high volumes. High Power Output : With the ability to output 80W x 2 at 4ohm load and 65W x 2 at 1% THD+N, the PA3s has enough power to drive any bookshelf or floor-standing speakers. Versatile Inputs : The TRS balanced and RCA single-ended inputs eliminate ground loop problems, making it easy to connect to a range of audio sources. The front panel button allows easy switching between inputs. Comfortable Listening Experience : With the lowest THD+N in the range of 10-20W output, the PA3s offers an optimal listening

The compact 40W amplifier provides separate channels for guitar and microphone signals, plus several other sections that are suitable for both live performances (indoors and outdoors) and other situations. The BSK-40 has on board built-in rhythmic backgrounds that can be played in the background, as well as an audio file player. The latter supports files from a USB flash drive connected to the appropriate port, as well as from a smartphone or other device connected to the AUX input. It also offers support for signals transmitted wirelessly (Bluetooth).In the guitar channel associated with the 1/4 "jack input, is volume control and 3-band equalizer as well as Chorus, Delay and Reverb effects.…

The Discovery Series DS-A101-G Integrated Amplifier solves two of the biggest problems with two-channel audio proper blending of a subwoofer with your main speakers and room correction. Its advanced DSP and innovative smartphone application provide all the tools necessary for anyone to achieve a true audiophile system at an affordable price.

Features: - A set of speakers is a suitable amplifier for small PARTY - Two signal inputs: DVD signal and AUX signal - LINE output, signal output can be connected to active subwoofer or other equipment signal source - Center surround output, 2 channels including center one, surround two - With remote control - bluetooth 5.0 - With FM radio - 5-band EQ mixer - Reverberation, fine tuning, balance - SD, USB interface, 4 microphone inputs. - with microphone reverb and delay adjustment Specifications: Model:336BU Size: 290×95×240mm/11.4x3.7x9.4in Rated voltage: AC 110V/220V 50/60Hz, DC12V Peak: 2000W Rated frequency: 20KH - 20KHz Signal to noise ratio: 90dB Standard

▶ Newest AK4493S - The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. ▶ Plug and Play - DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications) ▶ Discrete LNRD - The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise. ▶ Powerful output - DX1 can

Integrated Amplifier / Stereo / Output power per channel 35 Watt / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

Q240 power amplifier 2 x 120WStereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers.6.3mm jack or RCA inputsSPK, 6.3mm jack or 4mm post outputsFan cooled19" rack-mountable (2U)Fuse rating - T2A (240V) / T4A (110V)Power max. : 4 Ohms - 2 x 120WPower rms : 4 Ohms - 2 x 60WPower rms : 8 Ohms - 2 x 40WDimensions - 482 x 240 x 88mm (2U)Weight - 5.2kg