Amplifiers

Signal Processor / 19 Inch Size / Processor Type Expander / Number of Channels 4 / Rack Height 1 RU

Power Amplifier / Number of Channels 2

Superior Sound Quality : With the ESS SABRE ES9028Pro DAC chip, the E70 delivers powerful performance and exceptional sound quality. Its 8-channel Hyperstream II architecture ensures a rich and immersive audio experience. Innovative I/V Conversion : The E70 features a brand-new conversion circuit that provides lower distortion and noise in a compact design. It performs at an impressive 0.00006% THD+N, ensuring crystal clear sound. High-Quality Bluetooth Streaming : The E70 supports 24bit LDAC Bluetooth streaming, thanks to its QCC5125 Bluetooth 5.1 chipset. It reroutes the digital signal from the Bluetooth chip to the ES9028Pro DAC chip for the best sound quality. Wide Compatibility

Class-d amplifier providing 50 watts/channel (RMS) into 8ohm loads or 65 watts/channel into 4ohm loads. Bridgeable output provides 120 watts into a single 8ohm load 4 pole detachable speaker screw connector (Phoenix connector) with support for up to 12AWG speaker wire. 12-volt trigger input for power-on/off. 12-volt trigger output for controlling other devices. Buffered loop output of original signal for connecting additional amplifiers Rear panel volume gain adjustment. Built-in thermal and short circuit protection circuits Includes rack-mount ears for mounting a single amp or two amps side-by-side

Switch: Control a pair of speakers from either a stereo amplifier or a surround amplifier - easily convertible without cables. Multifunctional: The switch also offers the possibility to switch to 2 different pairs of speakers with 2 amplifiers. Safe: The high-quality rotary switch with zero position protects the connected devices - deep high-quality banana sockets provide the cables with a secure hold. Sound: Due to the increased cable cross section, the AMP-S Pro offers optimal signal transmission without distorting the sound of the system. Quality: The AMP-S Pro has a sturdy metal housing and a 4mm thick aluminium front plate in brushed finish.

ROHM flagship DAC chip BD34301EKV, Fully optimized its performance, making its THD+N as low as -117dB! Built-in linear power supply composed of british porcupine toroidal transformer. Coordinate multiple low-noise regulated power supplies to provide a stable, reliable, efficient and low-noise power supply system. CK-03 clock processing circuit, the new self-developed CK-03 clock processing circuit greatly reduces clock jitter. Specially designed discrete component regulated power supply and multiple low noise regulated power supplies. Provides low noise power supply for analog circuits. Faster and more stable reception. Support LDAC(24bit/96kHz), APTX/HD, SBC, AAC!

The Xvive P1 Portable Phantom Power Supply is a low-noise, 12V / 48V power supply. It runs on an internal rechargeable battery and has enough power to run high-current microphones. The P1 allows you to use microphones and devices that require external power in any setup. The small size, light weight, rugged construction, and exceptionally low noise of the P1 makes it perfect for powering microphones to send a signal to mixing consoles, or any type of processor or recording unit, that does not supply phantom power. Long battery life and a bright LED battery indicator ensure that the microphone is properly powered throughout your recording session. Switch: Yes Made in: China Package Contents: …

KAD-2 Digital stereo amplifierThis compact digital amplifier has four selectable inputs, two microphone inputs and is capable of delivering up to 55W max. per side. Mic volume, tone and echo effects are adjustable through rotary controls. Master Volume, Treble and Bass rotaries control tone and overall output. A multi-purpose amplifier suitable for both domestic and commercial use.Efficient Class D digital amplifierA high output power of 55W max. per side3.5mm stereo line input on the front panel3 stereo line inputs on RCASpring clip speaker output terminals2 x 6.3mm microphone inputs

The Topping PA7 Plus Class D Power Amplifier is a step up from the PA7 allowing for a more premium audio output. Equipped with two channels this amplifier delivers up to 165W of power to an eight-ohm load; primed and ready to boost most stereo setups. At the heart of the PA7 Plus is the Class D circuit design chosen by Topping for its efficiency and superior performance at this scale. This fully balanced structure reduces noise during transmission and achieves THD+N levels below 0.0003 per cent. The result is a clean and powerful audio output that will elevate your favourite songs. With a dynamic range of 124dB and a frequency response of 20Hz-40kHz the PA7 Plus is suitable for a wide range …

Germany's Infineon's new digiral high-power amplifier chip. Japan's NJRC company electronic volume control chip NJW1194. It can be bridged into a single-channel amplifier with higher power to drive a large speaker. The built-in high-pass filter circuit can filter out the subwoofer, drive the main speaker, and cooperate with the subwoofer to form a 2.1 system. Equipped with subwoofer signal pre-output, it is convenient to connect active subwoofers to form a 2.1 system. 165W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.004% THD). 12-month warranty, you can return the item or replace a new one if you have any problems.