Amplifiers

  TOPPING NX1s Hi-Res Digital HiFi Portable Headphone Amplifier AMP   Description: Measured: 8.4cm*5.5cm*1.0cm Weight:78g Power input: DC5V/1A(PC s USB 0.5A) Charge time: 40 hours THD+N:

Signal Splitter / Desktop / Number of Channels 1

Power Amplifier / Number of Channels 2

Features: - A set of speakers is a suitable amplifier for small PARTY - Two signal inputs: DVD signal and AUX signal - LINE output, signal output can be connected to active subwoofer or other equipment signal source - Center surround output, 2 channels including center one, surround two - With remote control - bluetooth 5.0 - With FM radio - 5-band EQ mixer - Reverberation, fine tuning, balance - SD, USB interface, 4 microphone inputs. - with microphone reverb and delay adjustment Specifications: Model:336BU Size: 290×95×240mm/11.4x3.7x9.4in Rated voltage: AC 110V/220V 50/60Hz, DC12V Peak: 2000W Rated frequency: 20KH - 20KHz Signal to noise ratio: 90dB Standard

Signal Processor / Desktop / Number of Channels 2

High Performance MQA DAC Amplifier: Harnessing the audio decoding chipset, the CS43131 from Cirrus Logic, SMSL DS100 boasts meticulously designed circuitry that elevates its performance to an astonishing distortion level of 0.00017% (-115dB)! It provides an unparalleled music experience and brings you into a new realm of music enjoyment. Supports MQA/MAQ-CD Decoding. Restore the most authentic sound in the recording studio. USB DAC XMOS XU-316 PCM support 32bit/768kHz & DSD512:Powering USB decoder is the brand-new third-generation XMOS XU-316, which boasts PCM support up to 32bit/768kHz and DSD support reaching DSD512. This ensures that your audio experience is as pristine and lossless as

Features: 1.Compatible with a variety of Quest2 Straps:BOBOVR A2 Audio Solutions adopts a side-sliding installation design, which can be directly installed on most Quest2 elite and halo Straps on the market (including but not limited to BOBOVR M1/M2 series, official Straps and mainstream third-party Straps ), which can greatly improve the sound quality of VR equipment and make your VR immersive experience better. 2.Built-in power amplifier module:Equipped with an additional DSP power amplifier chip and an independent lithium battery power supply system to improve the sound quality of the earphones. At the same time, A2 uses high-power 32/30mW2PCS TPU double-composite titanium film, NdFeB strong …

CE22 stereo enhancer/exciterThe CE22 is a professional multi-band enhancer/exciter designed for various applications. This unit combines 2 processors to align the phase and focus of bass frequencies, improve the response of mid-high frequencies and add harmonic content to any "dull" sounding audio. The surround processor utilises the phase alignment engine to give a greater perceived width to the stereo field.Dual/stereo multi-band processorProcess variable between enhancer and exciterDedicated bass processorsSurround processor to add width to stereo fieldAuto noise reduction circuitryBypass switch for processed/unprocessed comparisonBalanced and unbalanced inputs and outputs

Description: Dual channel stereo amplifier, suitable for karaoke and home acoustic sound system. The digital amp box USB, read U disk and memory card, Button Function: Previous, next, play/pause, knob controls for input, bass, treble, and volume, come with remote control. Mini HiFi BT power amplifier BT wireless connection. Adopts LCD display, backlight design, plug and play, dual microphone input, suitable for home and vehicle use. Specification: Model: AV-568BT Colour: Black Channel: 2.0 Rated power: 60W+60W Peak power: 500W+500W Load impedance: 4-16 SNR: 80dB Frequency: 20Hz-20KHz Remote control battery: CR2025, 3V, 150mA Voltage: 12V 110 V Plug: US Size Chart: Size: approx.

Dual channel level converter. The CLEANBoxPro provides two channels of unbalanced to balanced level conversion and two channels of balanced to unbalanced level conversion in a rugged, compact, and portable unit. Balanced lines offer increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used. Each section has stereo level controls to optimize signal levels. An LED indicator lights when power is applied. Frequency response: 20 Hz - 20 kHz. Comes with external power supply. Dimensions: 47 x 117 x 109 mm. Weight: 0,5 kg. Made in: China

Features: - Support 4 way microphone input - LED display - Tack output With EQ - Reverberation, fine tuning, balance, SD, USB interface. Specifications: Model: 325BT Size: 26 * 29 * 10cm Rated voltage: 110-240V 50 / 60Hz Rated power: 1200W Peak: 2000W Rated frequency: 20KH - 20KHz Signal to noise ratio: 90dB Standard impedance: 4 to 16 ohm Type of power amplifier: AV power amplifier Channel: 2.0 channel Total harmonic distortion: ≤ 0.5% Signal input sensitivity: 200mv (± 30mv) Microphone input sensitivity: 9 mv (± 2mv) Recording level output: 1V Auxiliary level output: 1V Support:USB Disk/Max 64GB SD Card(Not included) Color: Black Packaged included: 1 x Audio