Amplifiers

It took Joyo’s engineers two years to develop this patented new product: TheJAMBUDDY Combining guitar playback with its reduced high frequency range due to the sound of 12 inch speakers and also full range normal music playback is a difficult task. Some products on the market have already dealt with this issue and they are nice practice boxes that are controlled by hand on a table top. But this is not how guitar players operate their gear, we need our hands free and we stick our gear with our feet. JAMBUDDY combines both aspects, it is a floor based dual channel amp simulator that can be switched with your feet and also accepts a BLUETOOTH signal to play back your favorite backing tracks and so…

The Naim SuperNAIT3 High-End Integrated Amplifier deliver 80W of power through two channels at eight ohms offering a stunning stereo sound. The class AB amplification balances high efficiency with distortion-free audio providing you with a reliable base for your hi-fi system. The power transistors feature ceramic insulators providing efficient heat dissipation and excellent electrical insulation for consistent performance. The microphonic-isolating PCB mounts are also on hand to reduce unwanted vibrations and minimise interference resulting in an immersive sound. With five analogue inputs you can build out a dynamic audio system and create an immersive soundstage. The MM phono input lets you …

Supports Dolby Atmos up to 5.1.2 Channels (Speakers Included) Pure Driving Power from Discrete Amp Technology Simple Rear Panel Layout for Easy Connection Phase-Matching Bass Boost for Deep Bass and Clear Mid-Range Bluetooth Wireless Audio Streaming

High-end audio - TOPPING DX3 Pro+ is a high-performance DAC with USB, Optical, Coaxial, Bluetooth input, Line Out and headphone amplifier output. About Topping DX3 Pro+ - Equipped with the latest QCC5125 chip, it supports LDAC / AAC / SBC / APTX / APTX LL / APTX HD protocols. It uses the ES9038Q2M decoder, supports high-resolution music transmission, and can be played back with clear sound. Bluetooth 5.0 - Connect the Bluetooth of the phone, tablet or notebook to DX3Pro+, and connect the power amplifier, active speakers or headphones to the DX3Pro+'s output, then DX3Pro+ becomes your Bluetooth Headphone amp 1 Bluetooth DAC. You can easily enjoy the high quality music and convenience

Clean up the recording. When the analog sound is converted to a digital signal, time blurring will occur, blurring transient signals over time. As a result, our ears cannot tell where asingle sound comes from, the comparison between recorded music and “live performances” is unremarkable! MQA can eliminate this distortion and createa true 3D sound field, which is different from any sound you have ever heard. Encapsulate the sound. Once the blur in the recording is removed, MQA will use what we call a "musical origamiMprocess, cleverly makes this large resolution file easy to manage andcan compatible with any service or playback device. CD Player + MQA-Enabled DAC Your CD player's

2-zone Mixer-amplifier + USB/SD/FM/BluetoothMixer-amplifier with 2 separate 120W outputs to 100V or 4/8 Ohms speakers. Inputs for mic, 2 x mic/line and 2 line inputs with an integral USB/SD/FM player and Bluetooth receiver can be enabled independently to either of the 2 zones. Mic 1 channel has a variable override and switchable phantom power for use with condenser microphones. Designed for installations where independent paging and audio to 2 separate zones is needed.DetailsPower supply 110-230Vac, 50/60Hz (IEC)Power : output 2 x 120W rmsAudio source USB/SD/FM/BT audio playerInputs 1 x mic (XLR), 2 x mic/line (jack), 2 x line (twin RCA)Zone outputs: line 2 x RCAZone outputs: speaker 2 …

Phono Preamplifier

Headphone Amp / 1x S/PDIF IN (TOSLINK Optical) / Max Sample Rate 768 kHz / Bitrate 32 bit / DLNA Network Function / Bluetooth / Streaming Service Tidal

AK4493S: The DX1 uses newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Plug and play turn your PC into a HIFI source: DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. No adapter required: Like other USB device, the DX1 does not require an additional adapter for power supply. Only one USB cable can complete the power supply

Mono class D PA mixing amplifier, 1 x 1,000 W. Class D concept with PASCAL amplifier module. Energy-efficient concept due to high efficiency. Lightweight design due to compact switch-mode power supply. Silent operation due to fanless cooling concept. 4 balanced mic/line inputs. Mic 1 with priority circuit and automatic talkover. Additional connection for desktop microphone via screw terminal. 1 aux input, speaker outputs via screw contacts, line output. Insert facility, e.g. for effect units, equalizers, feedback controllers. Input level control and output level control. 2-way tone control for the output. 48 V phantom power supply for each microphone input, to be activated individually. Limiter …

The Elipson Music Centre Connect HD is jam-packed with fantastic features that will augment your music. Bluetooth offers wireless connectivity to your smart devices so you can stream your music with the Ethernet socket providing WiFi and Network connectivity which can create multiroom listening. Equipped with a built-in CD player the Music Centre Connect will magnify your favourite CDs in stunning audio quality. This receiver provides 2 x 120W of power and MP3 FLAC WAV AAC AAC+ codes which will supply incredible sounds. The FM DAB and DAB+ tuner will gift you with all your favourite local and national radio stations. The subwoofer output and headphone output will create an immersive music experience.…

Phantom power supply for microphones. Different condenser microphones specify different amounts of required phantom power. As a rule these ratings can range from 48 V all the way down to 9 V. Fortunately, there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be ''more is better''. Features XLR input and output, and 18 V DC input. Power supply is included. Dimensions: 130 x 74 x 45 mm. Weight: 315 g. Made in: China