Submersible (Drainage) Pumps

• Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover.• Max. Output: 100L(22gal)/min, Max. Head: 6m.• Minimum water depth of just 20mm.• Designed for clean water although this pump will accept small particles up to 5mm.• Automatic low water cut-out.• Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover. Minimum water depth of just 20mm. Designed for clean water although this pump will accept small particles up to 5mm. Automatic low water cut-out. Suitable for the effective drainage of cellars, si…

With a power rating of 350 W the rain barrel pump conveys up to 4,600 liters of clean water per hour and has a maximum delivery head of 11 meters. Even impurities of up to 2.5 mm in size are no problem.
The high-quality pump housing is made of impact-resistant plastic and is also resistant to light shock loads. There is an integral carry handle with practical cable rewind on the housing.
The flexible swan-neck and height-adjustable aluminium pipe in combination with the sturdy rain barrel bracket enable water to be drawn off easily.
The infinitely adjustable float switch activates and deactivates the pump automatically in accordance with the preset configurations.
There is a storage compartment …

Application – The pump allows the drainage or extraction of clear water (particles up to 5 mm). from tanks, water tanks, wells or garden fountains.
Performance - The 220W motor with thermal overload protection ensures a flow rate of 7500L per hour at a maximum backflow pressure of 0.6 bar.
Delivery height: the pump allows you to pump water to a discharge height of 6 m. When draining, the pump allows the suction flat up to a residual water level of 5 mm.
Handy float switch - The infinitely adjustable float switch automatically turns the pump on and off at a pre-set water height.
Sturdy pump - The housing of the clear water drain pump is made of shock-absorbing plastic. The pump is suitable fo…

The GE-SP 18 Li is a clean water pump which is a member of the high-quality lithium-ion battery-based Power X-Change family. This pump is perfectly suited for the garden, leisure, camping, and anywhere where water needs to be pumped. Especially useful in situations where a mains power connection is not readily available, it can be used with any of the batteries in the Power X-Change system. The powerful motor can pump up to 5,000 litres of clean water per hour. The separate and splash-proof battery box with hook and wall bracket also offers an option to store the cable on the housing for ease of use. The innovative battery box, as well as the high-quality pump body, which features an easily …

The Einhell GE-SP 18 LL Li is a water pump which offers cordless freedom and a powerful motor. It is designed for use with clean, or clear, water - that is, water that is not contaminated by dirt and debris. Part of the Power X-Change system, it can be used with any Power X-Change battery and shares battery compatibility with over 200 cordless tools for the home and garden. Ideal for situations where it is not safe, convenient or feasible to use mains power, the GE-SP 18 LL Li consists of a battery unit connected to the pump itself via a long cable which enables the pump to be immersed down to depths of 4 metres. It has a flow rate of up to 4500 litres per hour and will pump water out until …

DIY/domestic use in and around the home and garden. Ideal for irrigating gardens, draining cellars/basements and powering water features. The pump is fitted with a ceramic shaft and thermal overload protection for longer life. Supplied with 25 - 32mm diameter stepped hose adaptor, 10m (approx.) cable.

Ideal for pumping out clean water for general irrigation and other similar applications. Fitted with thermal overload protection and float switch that automatically turns the water pump off when water level has dropped. 10M (approx.) cable and approved plug. Display carton.

• Manufactured from high-impact stainless steel for added durability and corrosion resistance.• Max. Output: 1750L(360gal)/hr.• Max. Head: 2.3m.• Pond pump suitable for creating garden water features.• Also provides the important functions of filtration and water circulation which are necessary to maintain healthy plant and fish life.• Supplied with four adaptors and 10m cable.Manufactured from high-impact stainless steel for added durability and corrosion resistance. Pond pump suitable for creating garden water features. Also provides the important functions of filtration and water circulation which are necessary to maintain healthy plant and fish life. Supplied with four adaptors.• Manufactur…

Ideal for pumping out inspection pits, ditches and footings where suspended solids may be present, general irrigation and other similar applications. Fitted with thermal overload protection and float switch that automatically turns the water pump off when water level has dropped. 10M (approx.) cable and approved plug. Display carton.

The TWP 9000 ES dirty water submersible pump transports heavily contaminated water with particles of up to 25 mm in size.
The angle adapter can be adjusted by 360°, so that hoses and pipes can also run parallel to the ground.
Hoses or pipes with 25 / 38 mm inner diameter and 1 inch / 1½ inch threaded connections can be flexibly connected to the pump.
Suction in continuous operation up to 40 mm. With the horizontal locking of the float switch, the pump runs in continuous operation and sucks the water up to 40 mm.
Thanks to the Quick-Connect connection, 25 / 38 mm hoses (1 inch / 1½ inch thread) can be mounted quickly and easily.
The TWP 9000 ES submersible pump comes with a reduction ada…