Submersible (Drainage) Pumps

Flow rate up to 120 l/min (7.2 m³/h). Head up to 67 m. Motor 1.1 Kw (1.5 HP).

Lowara 104070340 8GS11M-4OS Lowara GS 4 Inch Multistage Underwater Pump for Drinking Water 1.1 kW / 1.5 HP / 1 x 220-240 V / 50 Hz

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

For heavy and continuous duty pumping of water levels down to 1mm. Ideal for draining water on flat roofs, car-parks, concrete shuttering, lift-shafts and basements. For use in tool-hire, on building sites, flood defence and general drainage of building sites, Pumps water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from tough steel and rubber. Built in handle. 10m of heavy duty H07RNF cable. Hose connector adjustable to two positions to avoid hose kinking.

For heavy and continuous duty pumping of water levels down to 1mm. Ideal for draining water on flat roofs, car-parks, concrete shuttering, lift-shafts and basements. For use in tool-hire, on building sites, flood defence and general drainage of building sites, Pumps water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from tough steel and rubber. Built in handle. 10m of heavy duty H07RNF cable. Hose connector adjustable to two positions to avoid hose kinking.

Lowara SCUBA 107660230 SC209CG L27 0,9 kW / 1,2 HP / 1x220-240V 50Hz LOWARA SCUBA Close-coupled Submersible Electric Pumps for clean water in 5” wells Single-phase pump WITH float switch

Flow rate up to 120 l/min (7.2 m³/h). Head up to 53 m. Motor 0.75 Kw (1 HP).

UP Multi-stage submersible pump INSTALLATION AND USE The main feature of this newly designed range of submersible pumps is that impellers will not block even after long periods of inactivity, thanks to innovative patented technical solutions. As a result of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure sets, for the irrigation of gardens and allotments and for pressure boosting TECHNICAL CHARACTERISTICS Independent floating impellers (patented) Double mechanical seals with oil chamber More compact in size (-20%) Reduced energy consumption

VX-ST VORTEX Submersible pump in stainless steel for Filthy Water INSTALLATION AND USE The VX-ST submersible pumps in stainless steel are recommended for draining filthy water in domestic, civil and industrial applications, in every case where there are solid bodies in suspension, for example water mixed with mud, groundwater, surface water. They are suitable for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations FEATURES Liquid type: filthy water Uses: domestic, civil

Suitable for feed water, agriculture, tank filling, etc.

Flow rate up to 120 l/min (7.2 m3/h). Prevalance up to 53m 0.75 kW motor (1 HP).

Flow rate up to 120 l/min (7.2 m3/h). Prevalance up to 40 m. 0.55 kW (0.75 HP).

UP Multi-stage submersible pump INSTALLATION AND USE The main feature of this newly designed range of submersible pumps is that impellers will not block even after long periods of inactivity, thanks to innovative patented technical solutions. As a result of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure sets, for the irrigation of gardens and allotments and for pressure boosting TECHNICAL CHARACTERISTICS Independent floating impellers (patented) Double mechanical seals with oil chamber More compact in size (-20%) Reduced energy consumption

UP Multi-stage submersible pump INSTALLATION AND USE The main feature of this newly designed range of submersible pumps is that impellers will not block even after long periods of inactivity, thanks to innovative patented technical solutions. As a result of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure sets, for the irrigation of gardens and allotments and for pressure boosting TECHNICAL CHARACTERISTICS Independent floating impellers (patented) Double mechanical seals with oil chamber More compact in size (-20%) Reduced energy consumption

The DG Blue Professional is a submersible pump is suitable for pumping water polluted with suspended solid particles. The cast iron vortex impeller gives great performance in terms of flow rate and head, including integral free passage of up to 40mm. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Agriculture /farming Sewage and treatment works Civil construction

The DG Blue Professional is a submersible pump is suitable for pumping water polluted with suspended solid particles. The cast iron vortex impeller gives great performance in terms of flow rate and head, including integral free passage of up to 40mm. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Agriculture /farming Sewage and treatment works Civil construction