Submersible (Drainage) Pumps

The RC900 is a mulistage sumbersible pump ideal for the transfer and pressurisation of clean water. The pump has a stainless steel construction and impeller with Noryl diffuser. Applications include: • Boosting • Domestic and industrial use • Agriculture and farms • Irrigation • Water distribution • Rainwater harvesting systems

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps small soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150 watt motor has overload protection. Built in handle. 10m of heavy duty H07RNF cable included.

The Goliath Super is a robust sump pump made of stainless steel plate and fibre-reinforced plastic which is resistant to corrosion. It features a vortex impeller giving 30mm solids handling. The maximum submersion depth for this pump is 10m and the minimum sump size is 250mm x 250mm. Applications include: Small water features Cellars and basements Domestic and industrial use Final effluent Nuisance water Marine application

Ideal for heavy and continuous duty pumping on building sites, industrial processes, tunneling,mines and quarries . Pump water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from heavy duty cast iron, tough steel and ductile iron. Built in handle. 20m of heavy duty H07RNF cable. Supplied with two hose connectors: spigot and mBSP Both adjustable to two positions to avoid hose kinking.

The FloodMate 2 is an emergency pumping kit for defending property from low level flooding. This set includes a 230V, 480 Watt submersible pump (model LSC1.4 capable of up 70 litres per minute, through 25mm 1" hose, over 30 metres of level ground). All the contents are supplied in a sturdy, easy-to-carry and store, case with lid and the included pump is designed to operate constantly, pumping away minimal amounts of flood water down to a level of 1mm. The hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Initial priming of the pump with water is required before starting, it will pump water down to 1mm and can run dry for long periods

The TDP 370 E is a 700 watt drilling pump at max. pressure. 3.7 bar, discharge height max. 40 meters and max. immersion. 20 m perfect for drafting clear water from deep water points with a minimum diameter. 125 mm. For watering gardens, vegetable gardens, flower beds and potted flowers, through automatic installation (sprinklers, sprinklers) or traditional watering can – water from a borehole, well or cistern saves on tap water for a multitude of tasks. A stainless steel filter strainer is integrated to filter any suspended particles, so the clear water can be used as cleaning water and/or for feeding certain household installations such as washing machines or toilets. This extremely compact pl…

TOP Submersible DRAINAGE pump for clear water INSTALLATION AND USE The TOP series is suitable for use with clear water that does not contain abrasive particles. As a result of the design solutions that have been adopted, such as the complete cooling of the motor and the shaft with double seal, these pumps are easy to use and reliable. They are suitable for use in applications such as draining small flooded areas (rooms, cellars, garages) in the event of an emergency, for the disposal of waste water in the home (from dishwashers, washing machines) and for emptying drainage traps FEATURES Liquid type: clean water Uses: domestic APPLICATIONS: emptying tanks, drainage. Typology: submersible

Pump both dirty and clean water with the HSE130A, Great for circulating water in pools & fish ponds* it really comes into its own when pumping ground, rain and flood water, creating waterfalls & fountains in water features, garden irrigation or even emptying waste water from sump pits. Robust build quality with a cast iron base, it has a built in strainer allowing it to pump small solids in suspension. Convenient float switch operated - pump is automatically switched on, then off, as water level rises and falls. *Please note – If used in ponds containing fish and aquatic animals ensure additional protection around the inlet is used

The DR Blue Pro is a submersible drainage pump with an open, multi-channel impeller for most soiled water applications. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Civil construction

The Goliath Super is a robust sump pump made of stainless steel plate and fibre-reinforced plastic which is resistant to corrosion. It features a vortex impeller giving 30mm solids handling. The maximum submersion depth for this pump is 10m and the minimum sump size is 250mm x 250mm. Applications include: Small water features Cellars and basements Domestic and industrial use Final effluent Nuisance water Marine application

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Integrated suspension eyelet Easily reachable hose connection on the pump's topside ECO power: higher delivery rate, lower power consumption

elettropompa Submersible Pump 4 gs15 m 4os LOWARA technical data: – kw/1,5 HP/2 Volt 220 – Prevalence in metres 127 ÷ 40/litres/min 30 ÷ 90 the pump comes complete with output cable length 1.75 metres

Perfect entry-level model: This high-performance and energy-efficient garden pump is so simple to use with a garden sprinkler or sprayer Robust and reliable: The powerful pump is very durable, thanks to its thermal overload switch and stainless steel shaft Compatible: Able to withstand pressures of up to 3.1 bar, the pump can also be used with longer hoses or sprinklers such as the Gardena AquaZoom (not included) Extra filler opening: You can use the second opening to fill the garden pump easily and without splashing – no need for a funnel Included with the product: 1x Gardena 3000/4 garden pump, 1x suction unit 7 m

The rain barrel pump GE-SP 3546 RB is a high-quality, reliable and powerful device designed specifically for the extraction of water from water butts and cisterns. By means of a continuously adjustable float switch, the robust device can be set to continuous operation or to a certain switch-on and switch-off level. The pump has a flexible gooseneck with stopcock for individual positioning of the garden hose, as well as a rain barrel holder, which allows the pump to be attached to the rain barrel. The GE-SP 3546 RB allows the extraction of impurities up to 2.5mm particle size. Its durable pump housing made of impact-resistant plastic makes it extremely robust. It has a carrying handle for

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

The PTS is a heavy duty submersible chopper pump ideal for particularly heavy applications that require a preliminary chopping of the solid material suspended in the liquid being pumped. Each pump has a large, through passage, open multi-channel impeller and double cutting system in suction inlet.

The GR Blue Pro is a sumbersible pump with high-head, cast iron impeller and cutter and boasts an impressive 69,000 cuts per minute. This pump model is equppied with an intake cutting system of a steel plate and triple-bladed rotary cutter. This system cuts fibres and stringy bodies and assures smooth pump function. Applications Industrial schemes Agriculture / farming Sewage and treatment works Irrigation

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps large soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150w motor has overload protection. Built in handle. Hose connector included and 10m of heavy duty H07RNF cable. Selectable manual or auto mode - auto will turn on at 285mm and off at 100mm and work in confined areas.

The Einhell GE-SP 18 LL Li is a water pump which offers cordless freedom and a powerful motor. It is designed for use with clean, or clear, water - that is, water that is not contaminated by dirt and debris. Part of the Power X-Change system, it can be used with any Power X-Change battery and shares battery compatibility with over 200 cordless tools for the home and garden. Ideal for situations where it is not safe, convenient or feasible to use mains power, the GE-SP 18 LL Li consists of a battery unit connected to the pump itself via a long cable which enables the pump to be immersed down to depths of 4 metres. It has a flow rate of up to 4500 litres per hour and will pump water out until

Ebara JESX M5* Brand self-suction electric pump Ebara Reference: 1690050000 Japanese technology Ebara Pumps Iberia, S.A., a manufacturer of centrifugal pumps, water pressurization and fire protection units, owned by the Japanese industrial company EBARA Co. world leader in the manufacture of fluid handling machines and systems.