Submersible (Drainage) Pumps

BC DOUBLE-CHANNEL Submersible pump for sewage water INSTALLATION AND USE BC submersible pumps are suitable for draining dirty water and sewage in domestic and civil applications. They come equipped with a DOUBLE-CHANNEL stainless steel impeller and are capable of pumping liquids containing short fibred suspended solids up to 50 mm. They are ideal for pumping sewage water, waste water, surface water and water mixed with mud in locations such as holiday homes and detached homes. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. TECHNICAL CHARACTERISTICS Cast iron pump body subjected to Epoxy

Ideal for agricultural and industrial use, this heavy-duty pump can handle heavily polluted waste water containing light slurry, sewage and waste solids up to 40mm diameter. This heavy duty cutter pump features automatic shutdown when the water level drops and thermal cut-out overload protection, complete with the Twin seals, TCT cutting plate and steel waste cutter.

The DR Blue Pro is a submersible drainage pump with an open, multi-channel impeller for most soiled water applications. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Civil construction

The Goliath Super is a robust sump pump made of stainless steel plate and fibre-reinforced plastic which is resistant to corrosion. It features a vortex impeller giving 30mm solids handling. The maximum submersion depth for this pump is 10m and the minimum sump size is 250mm x 250mm. Applications include: Small water features Cellars and basements Domestic and industrial use Final effluent Nuisance water Marine application

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

The encapsulated, impact-resistant plastic housing of the submersible pump is designed for use underwater up to a depth of 7 meters. From a water level of 85 mm, the submersible pump starts pumping until it reaches the maximum suction height of 40 mm. The handy angle adapter has the skill. With it, hose, tube or socket systems can be quickly and easily attached to the pump in one step and flexibly positioned 360°. Ideal for water extraction as well as for pumping out and inward, e.g. for swimming pools, basements, rain barrels, garden ponds, small digging pits, floods. Effortlessly pump clear dirty water with dirt up to 25mm in size and suspended particles.

D Submersible drainage pump for Clean or slightly Dirty Water INSTALLATION AND USE Designed to pump clear or slightly dirty water, these pumps are suitable for use in domestic, civil and professional applications and in particular for draining flooded areas such as cellars and garages, for draining swimming pools and reservoirs and for the disposal of non-sewage waste water. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. New version of the D series, made more reliable with the introduction of double mechanical seals. TECHNICAL CHARACTERISTICS Double mechanical seals. Cast iron pump body

The Baby Battery submersible pumps runs off the DC power provided by a 12V battery. This makes it ideal for pumping water from boat bilges, general drainage and transfer. Both reliable and efficient, this pump has a duty cycle of 20 minutes, and comes supplied with a fixed handle, hose coupling, 5 metres of PVC power cable and battery clips.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

The PTS is a heavy duty submersible chopper pump ideal for particularly heavy applications that require a preliminary chopping of the solid material suspended in the liquid being pumped. Each pump has a large, through passage, open multi-channel impeller and double cutting system in suction inlet.

The GR Blue Pro is a sumbersible pump with high-head, cast iron impeller and cutter and boasts an impressive 69,000 cuts per minute. This pump model is equppied with an intake cutting system of a steel plate and triple-bladed rotary cutter. This system cuts fibres and stringy bodies and assures smooth pump function. Applications Industrial schemes Agriculture / farming Sewage and treatment works Irrigation

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps large soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150w motor has overload protection. Built in handle. Hose connector included and 10m of heavy duty H07RNF cable. Selectable manual or auto mode - auto will turn on at 285mm and off at 100mm and work in confined areas.

VX-ST VORTEX Submersible pump in stainless steel for Filthy Water INSTALLATION AND USE The VX-ST submersible pumps in stainless steel are recommended for draining filthy water in domestic, civil and industrial applications, in every case where there are solid bodies in suspension, for example water mixed with mud, groundwater, surface water. They are suitable for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations FEATURES Liquid type: filthy water Uses: domestic, civil

With a stainless steel body, cast iron base and powerful 1530W motor offering an impressive 500 l/min flow rate, the CSP1530 Sewage Pump can pump clean and dirty water including solids with a diameter up to 50mm. This sewage pump is ideal for DIY or trade purposes to use in pits, trenches, tunnels and water tanks with slurry.

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps small soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150 watt motor has overload protection. Built in handle. 10m of heavy duty H07RNF cable included.

The Goliath Super is a robust sump pump made of stainless steel plate and fibre-reinforced plastic which is resistant to corrosion. It features a vortex impeller giving 30mm solids handling. The maximum submersion depth for this pump is 10m and the minimum sump size is 250mm x 250mm. Applications include: Small water features Cellars and basements Domestic and industrial use Final effluent Nuisance water Marine application

Ideal for heavy and continuous duty pumping on building sites, industrial processes, tunneling,mines and quarries . Pump water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from heavy duty cast iron, tough steel and ductile iron. Built in handle. 20m of heavy duty H07RNF cable. Supplied with two hose connectors: spigot and mBSP Both adjustable to two positions to avoid hose kinking.

VX VORTEX Submersible pump for sewage water INSTALLATION AND USE Suitable for use in domestic, civil and industrial applications where the water, such as groundwater, surface water and sewage water, contains suspended solids up t50 mm They are suitable for use in applications such as for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. PERFORMANCES Head +15% as compared to previous versions Flow rate +30% as compared to previous versions TECHNICAL CHARACTERISTICS Cast

Lowara 104071080 6 gs40t-4os Lowara GS electrobombas Submersible for wells of 4 " 4 kW/5.5 HP/3 x 380 – 415 V 50 Hz

VX-ST VORTEX Submersible pump in stainless steel for Filthy Water INSTALLATION AND USE The VX-ST submersible pumps in stainless steel are recommended for draining filthy water in domestic, civil and industrial applications, in every case where there are solid bodies in suspension, for example water mixed with mud, groundwater, surface water. They are suitable for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations FEATURES Liquid type: filthy water Uses: domestic, civil

The PuddlePal is a versatile and portable 2" submersible pump for clean water, featuring the ability to pump down to 1mm, therefore ideal for removing water from flat surfaces such as floors and flat roofs. Applications include: • Small water features • Residue • Cellars and Basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering • Lift Shafts

The SA 316-80 submersible pump is for pumping seawater, saltwater and chemicals. Constructed in 316-grade cast and pressed stainless steel it is fitted with wear resistant double mechanical seals in silicon carbide, carbon ceramic and Viton. The product is supplied with 10 metres of heavy duty, rubber power cable and the 400V motor is fitted with internal overloads. The chances of corrosion of 316 stainless steel increase with the effects of chloride concentrations, evaporation, temperature, aeration etc, (working individually or together). This model covers most, but not all global seawater conditions.