Submersible (Drainage) Pumps

With a diameter of only 10 cm, the pump of deep and thin wells can be inserted into wells with a minimum diameter of 12.5 cm. The high quality brass thread of the pressure fitting is designed for 1/4" hoses. The case of the TDP 370 E is made of stainless steel. The pump is also equipped with a copper motor, a check valve and a built-in thermal protection circuit. Thanks to the 23 m long power cable, it is connected "plug & play". The dust strainer is also made of stainless steel. Prevents the penetration of particles larger than 1.8mm (based on 0.15% solids content in one ton of water) and protects the pump from sand and dust damage. To ensure that the TDP 370 E can be integrated to the bottom,…

VX VORTEX Submersible pump for sewage water INSTALLATION AND USE Suitable for use in domestic, civil and industrial applications where the water, such as groundwater, surface water and sewage water, contains suspended solids up t50 mm They are suitable for use in applications such as for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. PERFORMANCES Head +15% as compared to previous versions Flow rate +30% as compared to previous versions TECHNICAL CHARACTERISTICS Cast

The Clarke PSP105 Puddle Pump features a 250W motor with Auto sensor. It is ideal for draining flooded cellars, sumps etc and clearing spillages, thanks to the low 1mm suction depth. This Puddle Pump also features a 3 position auto sensor which allows a remaining water level to be set, or can be used as a continuous duty pump without the plug in sensor. Note: Suitable for use with clean water only

Clarkes truly heavy duty, industrial quality submersible pump benefits from a corrosion resistant stainless steel drive shaft and body. It also has a sharpened, tungsten carbide cutter plate to chop and reduce any water borne sewage or vegetation. This enables the HSEC651A to happily pump dirty water, even sewage water, all day long and for cost conscious, economic operation, it’s also switched on and off automatically, thanks to the inclusion of a simple but effective float switch – as the water level rises this activates the pump; and turns it off once desired water level has been reached.

The DG Blue Professional is a submersible pump is suitable for pumping water polluted with suspended solid particles. The cast iron vortex impeller gives great performance in terms of flow rate and head, including integral free passage of up to 40mm. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Agriculture /farming Sewage and treatment works Civil construction

The Trencher Range of submersible 2" drainage pumps are compact, light and powerful and are suitable for ground water and water containing sand and silt. The built in agitator makes this pump ideal for removal of dirty water. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable. Automatic - will turn on at 607mm and off at 115mm with some adjustment to turn on lower.

Lowara 104071080 6 gs40t-4os Lowara GS electrobombas Submersible for wells of 4 " 4 kW/5.5 HP/3 x 380 – 415 V 50 Hz