United Kingdom
Catalog   /   Climate, Heating, Water Heating   /   Water Supply & Pumps   /   Submersible (Drainage) Pumps

Submersible (Drainage) Pumps

 prices on 471 model  
Show
UP Multi-stage submersible pump INSTALLATION AND USE The main feature of this newly designed range of submersible pumps is that impellers will not block even after long periods of inactivity, thanks to innovative patented technical solutions. As a result of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure sets, for the irrigation of gardens and allotments and for pressure boosting TECHNICAL CHARACTERISTICS Independent floating impellers (patented) Double mechanical seals with oil chamber More compact in size (-20%) Reduced energy consumption
£588.55
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Flow rate up to 650 l/min (39.0 m³/h) Head up to 15 m
£414.86
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
The FloodMate 2 is an emergency pumping kit for defending property from low level flooding. This set includes a 230V, 480 Watt submersible pump (model LSC1.4 capable of up 70 litres per minute, through 25mm 1" hose, over 30 metres of level ground). All the contents are supplied in a sturdy, easy-to-carry and store, case with lid and the included pump is designed to operate constantly, pumping away minimal amounts of flood water down to a level of 1mm. The hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Initial priming of the pump with water is required before starting, it will pump water down to 1mm and can run dry for long periods
£769.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
The SA 316-130 submersible pump is for pumping seawater, saltwater and chemicals. Constructed in 316-grade cast and pressed stainless steel it is fitted with wear resistant double mechanical seals in silicon carbide, carbon ceramic and Viton. Supplied with 10 metres of heavy duty, rubber power cable. The 400V motor is fitted with internal overloads. The chances of corrosion of 316 stainless steel increase with the effects of chloride concentrations, evaporation, temperature, aeration etc, (working individually or together).This model covers most, but not all global seawater conditions.
£1,249.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
The DG Blue Professional is a submersible pump is suitable for pumping water polluted with suspended solid particles. The cast iron vortex impeller gives great performance in terms of flow rate and head, including integral free passage of up to 40mm. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Agriculture /farming Sewage and treatment works Civil construction
£519.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
The Liberator range of 2" submersible drainage pumps are compact, light and powerful. They are suitable for ground water and water containing sand and silt and have a maximum solids handing of 7mm. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and mining • Hire fleets • Emergencies • De-watering
£369.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Clarkes 110V powered industrial quality submersible pump has a stainless steel drive shaft and chrome plated body, plus a 50mm (2") diameter outlet.
£215.98
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
• Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover.• Maximum Output: 250L(55gal)/min.• Maximum Head: 9.5m.• Minimum water depth of just 20mm.• Designed for clean water although this pump will accept small particles up to 5mm.• Automatic low water cut-out.• Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover. Minimum water depth of just 20mm. Designed for clean water although this pump will accept small particles up to 5mm. Automatic low water cut-out. Suitable for the effective drainage of cell…
from £96.95 up to £131.50 
Compare prices and buy Sealey Submersible Water Pump Automatic 250L/min 230V
£97.00
£97.00
£115.00
£120.00
£132.00
Compare prices5
RX Submersible DRAINAGE pump in stainless steel for clear water INSTALLATION AND USE The RX series pumps are suitable for use with clear water that does not contain abrasive particles. As a result of the design solutions that have been adopted, such as the complete cooling of the motor and the shaft with double seal, these pumps are easy to use and reliable. They are suitable for use in fixed installations and applications such as draining small flooded areas (rooms, cellars, garages) in the event of an emergency, for the disposal of waste water in the home (from dishwashers, washing machines) and for emptying drainage traps. FEATURES Liquid type: clean water Uses: domestic, civil
£274.36
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Lowara SCUBA 107660130 SC411C L27 1,1 kW / 1,5 HP / 1x220-240V 50Hz LOWARA SCUBA Close-coupled Submersible Electric Pumps for clean water in 5” wells Single-phase pump WITHOUT float switch
£619.00
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
UP Multi-stage submersible pump INSTALLATION AND USE The main feature of this newly designed range of submersible pumps is that impellers will not block even after long periods of inactivity, thanks to innovative patented technical solutions. As a result of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure sets, for the irrigation of gardens and allotments and for pressure boosting TECHNICAL CHARACTERISTICS Independent floating impellers (patented) Double mechanical seals with oil chamber More compact in size (-20%) Reduced energy consumption
£544.30
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
With a cast iron body and powerful 870W motor, the CGP870 Grinder Pump is the ideal pump for the grinding and disposal sewage and waste water. The pump body is protected by a durable dual-layer coating to avoid any risk of leaks. Plus, the pump also features thermal cut-out overload protection.
£298.80
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
The Arvex/S (230V) is ideal for the pumping of chemicals that are of mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with sea and salt water and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension but is not suitable for ponds or water features, but the included power cable is 10 metres allowing for extra working room. The maximum liquid temperature is 50°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316-grade (1.4401) pressed
£799.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
The Goliath Super is a robust sump pump made of stainless steel plate and fibre-reinforced plastic which is resistant to corrosion. It features a vortex impeller giving 30mm solids handling. The maximum submersion depth for this pump is 10m and the minimum sump size is 250mm x 250mm. Applications include: Small water features Cellars and basements Domestic and industrial use Final effluent Nuisance water Marine application
£249.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Ideal for heavy and continuous duty pumping on building sites, industrial processes, tunneling,mines and quarries . Pump water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from heavy duty cast iron, tough steel and ductile iron. Built in handle. 20m of heavy duty H07RNF cable. Supplied with two hose connectors: spigot and mBSP Both adjustable to two positions to avoid hose kinking and supplied as Selectable manual or auto sensor mode - turns pump off when water level drops and protect from dry running.
£2,599.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Filters
Price
from£ up to£ 
Brands
Suitable for
Capacity
Head
Suction height
Pump type
More features
Connection size
Maximum power
Noise level
Maximum particle size
Power source
Engine type (for motor pumps)
Impeller / auger material
Country of origin