Scooters

•Made of high quality metal, strong smooth cable for more wear-resistant, anti-rust, durable •130cm cable for front brake, and their length can be cut easily to match your scooter well •With a hose sleeve can prevent the housing cable from water and dust, provide better braking power and smooth operation •If your brake cable breaks rusty and influences the normal use of the scooter, then you need our replacement brake cable. Easy to install Specifications: •Compatible model: for Ninebot MAX G30 •Material: metal Package included: •1 x Set of Brake Cable Kit •Other items not include

•It is used to control the start, running, forward and reverse, speed and stop of the electric scooter •Simple structure, convenient installation, saving time and effort •High quality ABS material, stable, strong and durable •An important part for electric scooter Package included: •1 x Controller Cover with Charging Port

•Specific for Ninebot Max G30 electric scooters •Precise measurement, fit the scooter perfectly •Made of durable material, solid for long term use Specification: •Material: plastic + metal •Size: 4.05*6.05*3cm Package included: •1 x Finger Throttle

SNAPBIKE is an ultra-resistant bike holder compatible with all smartphone models.SNAPBIKE´s secure smartphone locking system ensures maximum stability and resistance on any road.Its fixing system works by interlocking.The universal plate included in the package and the compatible back case have a threaded hole that fits into the holder, allowing you to easily attach the smartphone.SNAPBIKE is designed to be mounted on the handlebar and is compatible with all standard handlebar sizes.Not only that: it can also be used with e-scooters.The inclination of its head is adjustable, and it is possible to attach the smartphone both vertically and horizontally, in order to use applications, access playlists o…

Especially suitable for closing bicycles and scooters. In cemented and tempered steel of 6 mm. Scratch resistant ABS cover. overall length 70cmSpecifications:Dimensions:- Height: 70 cm- Length: 30 cm- Depth: 12 cm- Weight: 0,4

[Compatible with Two Models] The newest model of Circuit Board has a screen cover design that is fit for Mijia M365 and for M365 Pro electric scooter. The Circuit Board is a replacement for M365/M365 Pro Electric Scooter.[Upgrad Model of Circuit Board] This is the newest model of Circuit Board with a screen cover, designed for Mijia M365 and for M365 Pro electric scooter. No need to do any firmware upgrade after you replace the Circuit Board.[High Quality and Durable] The for M365 Pro dashboard is made of high quality metals and PCA materials,fully compatible with for m365 and pro scooter accessories.[Functional Appearance] The newest model for M365 / M365 Pro circuit board has a cool, clear

100% brand new high quality.Modification accessories.Repair and replacement parts.Multiple processes aluminum alloy material, fine workmanship, sturdy and durable.Professional manufacturing, corrosion resistant and not easy to fade.Fit for Mijia 365 Electric Scooters.Colour: blackMaterial: aluminum alloyPackage Contents:1 x Scooter forehead1 x Press blockOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Description: *100% brand new and high quality *Made of sturdy, high-hardness, good-quality ABS material, not easy to damage, possess high performance, strong *Widened and thick thumbstick, more durable, safer to use, non-slip and waterproof design, easy to control *The accelerator is specially designed for electric scooters, suitable for most scooter models *The accelerator is controlled by an electronic Hall sensor, the motor is Hall DC drive, the sensor voltage is 5V, you can use when the parameters are consistent, the port type and voltage are the same *The thumb press is designed with raised stripe for easy acceleration and very easy to use Specification: *Material: ABS *Color: Black *Size: …

Replacement control module for the Razor MX125

Replacement RipRider Seat w/Screws - Blue

Screws Not Included. Aesthetically With Small Differences From Its Originals.Original Smartgyro Spare Part, The Spare Part Has Been Built With The Highest Quality Controls To Satisfy The Demands Of Production And Has An Iso 9001 Quality Certificate.Specifications: - Weight: 0.17kg

Description:*100% brand new and high quality*Made of sturdy, high-hardness, good-quality ABS material, not easy to damage, possess high performance, strong*Widened and thick thumbstick, more durable, safer to use, non-slip and waterproof design, easy to control*The accelerator is specially designed for electric scooters, suitable for most scooter models*The accelerator is controlled by an electronic Hall sensor, the motor is Hall DC drive, the sensor voltage is 5V, you can use when the parameters are consistent, the port type and voltage are the same*The thumb press is designed with raised stripe for easy acceleration and very easy to useSpecification:*Material: ABS*Color: Black*Size: 44x22 …

Flex brake of chilli Pro Scooter In two different designs – 110 mm Wheels (models C5 Series) & 120 mm wheels (models C7 Series) Including screws Color: Black. Material: Steel

LCD Display Device for 5/5.5 Inches Size. This display can only be matched with 36v 12A controller or JIPIN controller.Please confirm the controller model before purchasing.Different controller models may cause the throttle to not work. Display wiring instructions (please correspond to the wiring color when installing): Red line: + (power supply voltage) black:- White: Controller switch control line Blue: RXD signal line Yellow: TXD signal line Green: acceleration signal line NOTE: Instrument setting 24V/36V voltage description: long press the middle key for 3 seconds to switch the machine, single press the up and down keys to increase or decrease gears, press the up and down keys at the same …

LCD Display Device for 5/5.5 Inches Size.This display can only be matched with 36v 12A controller or JIPIN controller.Please confirm the controller model before purchasing.Different controller models may cause the throttle to not work.Display wiring instructions (please correspond to the wiring color when installing):Red line: + (power supply voltage)black:-White: Controller switch control lineBlue: RXD signal lineYellow: TXD signal lineGreen: acceleration signal lineNOTE:Instrument setting 24V/36V voltage description: long press the middle key for 3 seconds to switch the machine, single press the up and down keys to increase or decrease gears, press the up and down keys at the same time to …

Replacement Accessories for Kugoo S1 S2 S3 Net weight: 68g Function: Replace damaged parts size:100 x 45 x 8mm Material:Composite material colour:As shown Package Contents: 1 x Electric scooter display Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Suitable for Kugoo kirin S1Charging Port Built-in wire is high purity copper core to reduce pressure drop It is very convenient and quick to use and install

Features: Made of lightweight and durable aluminum alloy, strong and stable to support your scooter. Easy to fix on the bottom of your scooter and no-need to detach any parts. Fine workmanship,smooth surface,the parking stand will not scratch your electric scooter. Replacement for Ninebot ES1, ES2, ES4 electric scooters. Specifications: Material: Aluminium alloy Color: Black Product Size: 15 * 5 * 2 cm / 5.9 * 2.0 * 0.8 in Product Weight: 200 g / 7.1 oz Package List: 1 * Kickstand

Main points before buying *This 3-pin charging port is only suitable for Kugoo G1, Zero 8X/10X/11X Electric Scooter Electric Scooter * this charging port requires large hands-on ability. Before replacing it, be sure to turn off the power and unplug the plug that connects to the battery first. * Do not use a metal tool such as a screwdriver to touch the two charging pins at the same time before unplugging the plug connecting to the battery, it is very dangerous, it will cause a short circuit and will damage your scooter even in case of fire

2 pairs 10 Inch Resin Disc Brake Pads For Kugoo G2 Pro Electric Scooter Friction Plates Excellent material, long life and durable. Main Material: Metal + Resin Net Weight: 14g

•Made of high-quality plastics, with high toughness and reliable to use •Nice replacement accessory for old and damaged motor wire •850mm/2.8ft in lenfth, easy to install •It is compatible with M365/PRO/PRO2/1S/MI3 electric scooters Specifications: •Material: Plastics + Metal •Length: 850mm/2.8ft •Item Weight: 61.8g/2.2oz Package included: •1 x Motor Wire

Replacement UK charger 25.2V/0.6A for the Razor Hovertrax 1.5  Photo is used for illustration purposes

Replacement control module for the Razor Power Core E100