Car Service Station Equipment Laser Tools

A simple tester to check the performance of the spark plug.Instructions included on packaging.RoHS Compliant.Rubber connector.Flash indicator.Metal to HT lead connector.

This camshaft locking device simply slides between the 2 camshaft pulleys on 16 valve twin cam engines.Rover K series enginesOEM Toolcode 18G 1570MG Express, MGF, TF, ZR, ZS, ZT, ZT TurboRover 100/200/25/400/45/75/Metro/StreetwiseWith engine codes K16, 14K, 16K, K8 (1990-2006)

1/2"D 40mm deep socket for use with air impact tools. Special size socket for hub nuts on Peugeot vehicles.Air impact deep socket40mm 6pt (single Hex) 1/2" drive35mm drive depth, 55mm internal depth, 55mm external dia.Fits some Peugeot hub nutsChrome Vanadium

For easy alignment of single plate clutches. Also suitable for flywheels with no pilot bearing.For single plate clutches.Suitable for flywheels with or without pilot bearing.Fast to fit and remove.Universal applications.Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm.

For automotive use. 6-24 volt. RoHS compliant, CE certificated.Audible warning buzzer.For automotive use only.6-24 volt.RoHS compliant.CE certificated.

Gives good visibility to align the nail and washer slot. Removes and installs brake shoe retaining washers with ease.Gives good visibility to align the nail and washer.Removes and installs brake shoe retaining washers.Great time saver.Selected steel.Double ended.

For use on brake systems that do not use anchor pins. Comfy grip handle.For use on brake systems that do not use anchor pinsComfortable grip handleSelected steelBlack finishTime saver

Heavy duty, ideal for more robust applications. Scissor type.Heavy dutyIdeal for many applicationsScissor type, maximum opening to 60mm, 19mm jaw width, 25mm jaw depthRobust quality toolThrust nut for leverage

For removing brake retaining pins 5.5mm & 6mm.2 piece.For removing brake retaining pins.Sizes 5.5mm & 6mm.6mm uses a pilot tip to locate in hollow pins.Fits most cars.

A set of pliers especially designed for removing the insulation boot from spark plugs. Spring assisted mechanism with boot profile arms for easy removal.Heavy dutyDesigned for removing the insulation boot from spark plugsSpring assisted mechanismBoot profile armsTime saver

For tracking ignition problems in-line to the spark plugs.4 x HT lead testers.For testing the output on HT leads.For tracking ignition problems.RoHS compliant.0

This robust slide hammer puller set is capable of exerting 5lb of force and will pull out damaged body panels and other metal distortions using 5 special end attachments and screw extractor with adaptors. The sliding hammer consists of 5lb sliding weight, rubber coated handle for extra grip and sliding bar with screw end for 8 attachments.This robust slide hammer puller set is capable of exerting 5lb of force.Multi purpose bodywork tool set.5 x special end attachments.Screw extractor with adaptors.Rubber coated handle for extra grip and sliding bar with screw end.

This metal band wrench will remove any cylindrical object up to a diameter of 105mm. Suitable for old style oil filters.This metal band wrench will remove any cylindrical object up to a diameter of 105mmReplaceable band Part No. 0139Suitable for old style oil filters65-105mm diameterTurn knob adjustment

For use on most petrol engines with a 14mm spark plug thread. Provides clear and simple indication as to when the cylinder has risen to its highest point. 16mm shank for use with standard socket.Clear and simple indicator.For use with most petrol engines with a 14mm spark.Used in conjunction with dial test indicator.Easy to use.16mm shank for use with standard socket. Overall length 152mm.

This timing tool set is suitable for engines manufactured after 1997 where the threaded location holes have been removed.For 1.7 engines built before 2001.OEM Ref KM 661-2, KM 851 and KM 951.For Astra-F/G, Cavalier, Vectra-A with 17DR, X17DT, DTL engines.Time saving tool.Belt driven engines.

A multi application wrench with variable adjustment. Holds the sprocket whilst releasing the fastener.A multi application wrench with variable adjustment.Holds the sprocket whilst releasing the fastener.Reduces potential damage to camshaft.Designed to allow the sprocket to be held still whilst undoing fixings.Adjustable.

Genuine Laser Tools 2874 Injector Nozzle Port Cleaner from 6101

A special bit designed for use on sump covers on gearboxes for Alfa Romeo, Fiat and Lancia vehicles.3/8" drive240mm longSize M8For use on sump covers on gearboxes for Alfa Romeo, Fiat and Lancia vehiclesManufactured from Chrome Vanadium

A special bit designed for use on headlight alignment for Alfa Romeo, Fiat and Lancia vehicles.3/8"D200mm longSize M7For use on headlight alignment for Alfa Romeo, Fiat and Lancia vehiclesManufactured from Chrome Vanadium

For use on Bendix brakes.1/2" driveFor use on Bendix brakes19mmSuitable for Citron, Peugeot, RenaultManufactured from Chrome Molybdenum

This screw type socket is 35mm and suitable for Citron/Peugeot vehicles.Screw type.35mm.For Citron and Peugeot.Selected Steel. Use with spanner or socket - 35mm.

For use on Bedford HGV.28mmBi-Hex1/2"DFor use on Bedford HGVManufactured from Chrome Vanadium

For removal and locking of grooved type 'V' belt pulleys found on alternators and water pumps (also useful for rotating camshafts).Suitable for alternators.Plus water pumps.Also useful for rotating camshafts.Removes and locks any grooved 'V' type belt pulley.Can be used on tooth pulleys without damage.

Genuine Laser Tools 2930 Exhaust Pipe and Tubing Cutter