Car Service Station Equipment Dremel

The Workstation combines a drill press and a tool holder. The Workstation enables you to drill vertically or at an angle and holds your tool horizontally for polishing and sanding.

This versatile brush is ideal for removing rust and corrosion, polish metal surfaces, deburr and blend surface junctures or clean electrical components.

This bristle brush can be used for light deburring, cleaning, polishing of silverware, jewelry and other precious metals. Can be used with polishing compound.

Stainless steel brushes do not cause “after rust” when used on corrosive-resistant materials like pewter, aluminum and stainless steel.

Stainless steel brushes do not cause “after rust” when used on corrosive-resistant materials like pewter, aluminum and stainless steel.

These brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass.

These brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass.

Can be used for fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials.

Can be used for fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials.

The Dremel SC541 Grinding Wheel is ideal for grinding and deburring different types of metal. Because of the glass fibre reinforced 38mm diameter wheel you can grind faster and more efficiently. The EZ SpeedClic system enables quick, easy and keyless accessory change.Technical Specifications:Shank Diameter: 3.2mmWorking Diameter: 38mm

The Dremel 100 Piece Multipurpose Accessory Kit contains 100 high quality accessories including EZ SpeedClic accessories which allow for quick and easy accessory changes, this accessory kit allows you to tackle a wide range of applications in a variety of different materials. Contents: 150 (1) - Drill Bit, 401 (1) - Mandrel, 402 (1) - Mandrel, SC402 (1) - EZ SpeedClic Mandrel, 932 (1) - Aluminum Oxide Grinding Stone 9.5 mm, 952 (1) - Aluminum Oxide Grinding Stone 9.5 mm, 84922 (1) - Silicon Carbide Grinding Stone 4.8 mm, 541 (1) - Aluminum Oxide Grinding Wheel, 421 (1) - Polishing Compound, 414 (10) - Polishing Wheel 13 mm (6 pcs), 429 (5) - Polishing Wheel 26 mm, 403 (1) - Brush 19 mm, 409 …

The Dremel 100 Piece Multipurpose Accessory Kit contains 100 high quality accessories including EZ SpeedClic accessories which allow for quick and easy accessory changes, this accessory kit allows you to tackle a wide range of applications in a variety of different materials. Contents: 150 (1) - Drill Bit, 401 (1) - Mandrel, 402 (1) - Mandrel, SC402 (1) - EZ SpeedClic Mandrel, 191 (1) - Speed Cutter, 952 (1) - Aluminum Oxide Grinding Stone 9,5 mm,8153 (1) - Aluminum Oxide Grinding Stone 4.8 mm, 83322 (1) - Silicon Carbide Grinding Stone 3.2 mm, 84922 (1) - Silicon Carbide Grinding Stone 4.8 mm, 541 (4) - Aluminum Oxide Grinding Wheel, 421 (1) - Polishing Compound, 414 (10) - Polishing Wheel …

This detail abrasive brush has very flexible bristles which allow removal of the exterior “surface layer” without damaging the base layer below. This can be used for deburring, cleaning, finishing, and polising of detailed parts, tiny areas and irregular places.

The Detail Abrasive Brushes have very flexible bristles which allow removal of the exterior “surface layer” without damaging the base layer below.This can be used for deburring, cleaning, finishing, and polising of detailed parts, tiny areas and irregular places.Use with EZ SpeedClic mandrel 402 (Sold seperately) Technical Specifications: Shank diameter: 3.2mmWorking diameter: 25.4 mmGrit: 220Maximum RPM: 15000 min

Clear and simple solution for redirecting debris and sparks when using your Dremel multi tool. 360 degrees adjustable - provides easy access to the accessory without interfering with the work piece.

Etch and engrave into glass projects with the Dremel glass etching accessory set. Featuring a variety of diamond engraving tips and silicon carbide grinding tips, you can etch detailed designs into glass, as well as other materials including stone and ceramics. A quick start guide is included, giving you guidance on how to get the best out of each accessory and achieve great results with your projects.

The EZ SpeedClic sanding mandrel & sanding bands are ideal for quick material removal.The quick change EZ SpeedClic mandrel enables fast sanding band change.Pull, Place, Push.Compatible with Dremel 408 & 432 sanding bands. Technical Specifications:Shank diameter: 3.2mmWorking diameter: 13mmAccessory length: 36mmGrit: 60/120

These Dremel Metal Cutting Wheels feature the unique EZ SpeedClic mandrel and two fiberglass reinforced metal cutting wheels.

These cutting wheels are specially designed for cutting in all sorts of plastics.Quick, Easy, Keyless.

Cut faster through wood. With this ø 38 mm EZ SpeedClic wood cutting wheel 544 you can cut both hard and soft types of wood and also laminate. The carbide coating makes this wheel very durable. Quick, Easy, Keyless.Technical Specifications:Shank diameter:  Requires the EZ SpeedClic Mandrel SC402 (Sold Seperately)Shank diameter3,2 mmWorking diameter38,0 mmMax working depth14,0 mmMaximum RPM35.000 1/min

Carve, sand and drill into wood with precision and accuracy with the Dremel woodworking accessory set. The set includes a variety of woodworking accessories including sanding mandrels and bands, drill bits and carving bits for achieving the perfect finish to your wood-based projects. A quick start guide is also included, giving you guidance on how best to use each accessory with your projects. Perfect for detailing and finishing in wooden designs.