Car Service Station Equipment Clarke

This robust compact Clarke 12V vehicle battery charger can be used to charge lead acid batteries and is protected against thermal overload and reverse battery connection. Tough robust non-conductive casing.

This automatic battery charger is suitable for charging not only conventional lead acid batteries but also sealed, gel and leisure batteries. This makes it ideal for use with caravans and boats as well as cars, vans and large motor cycles.

The Clarke IBC15 is suitable for use with all types of 12V lead acid batteries and can deliver up to 15A of charging. This unit benefits from a boost feature (12V 15A) for faster charging and the IBC15 also has a 12V socket for conveniently charging other devices. With LED colour indicators, reverse polarity and overcharge protection, this is a capable, compact and lightweight charging solution.

With an 8-stage fully automated charging cycle delivering up to 4A of charging, the Clarke IBC4 is suitable for use with all types of 6V/12V lead acid batteries (WET, MF, EFP, STD., GEL and AGM) up to a capacity of 120Ah. This unit also includes detachable ring terminals and battery clamps, fitted with an inline fuse for added usage. Safety features include anti-spark, reverse polarity, short circuit and overload protection. 8 Stage Charging Cycle 1 - Testing 2 - Analysis 3 - Desulphation 4 - Soft Start 5 - Bulk Charge 6 - Absorption 7 - Pulse Charge 8 - Maintain Please note – Not Suitable for Lithium ion & Li-Po batteries

Ideal for garage and workshop use. Dual purpose unit for automotive use for either rapid high boost input to get vehicles started quickly or a slow/trickle charge for normal reinstatement.

The Clarke BC190 is a battery charger and starter and is ideal for garage, motor dealer and fleet operator use. Dual purpose unit for automotive use for either rapid high boost input to get vehicles started quickly or a slow/trickle charge for normal reinstatement.

Designed for the rapid drying of water based paints to speed up processing time and achieve a professional finish. The blow gun is lightweight, allowing for prolonged use without fatigue, and operates on a compressor air supply with a ¼” BSP fitting. Benefiting from an air filter, airborne particles are prevented from contaminating paint surface, helping to reduce reworking and achieving a professional finish. The adjustable airflow allows the user regulate airflow as required, allowing for complete control over the drying process. This product is ideal for localised or spot repair and is handheld.

Transform the way you work on vehicles with the Clarke CCL2250 Car Lift. Designed to reduce the need of jacks and axle stands, this low-profile lift gives you fast, stable access to your vehicle’s underside - making routine maintenance, repairs and upgrades safer, quicker and far more comfortable. Full Under-Car Access (No Obstructions) The open-centre design provides clear, wheel-free access - perfect for exhaust work, oil changes, and inspections without constantly repositioning equipment. Powerful 2.25 Tonne Lifting Capacity Confidently lift most cars with smooth, even elevation thanks to the integrated hydraulic flow divider. Built for Safety as Standard Automatic safety …

The Clarke CFSR500 Steel Folding Ramps provide a safe and simple solution for unloading from vehicles or trailers (when extended) and for use as a vehicle ramp (when folded). Ideal for use with vans, trailers, tractors, lawnmowers, quadbikes, motorbikes and various other vehicles. These ramps include safety chains to ensure they are secure when loading, carrying straps and tyre stops to prevent vehicles from rolling.

This easy to use trigger-activated timing light is ideal for measuring and adjusting the timing advance range of a vehicle at a range of 0-60° BTDC. This product features an LED indicator to confirm hook-up is correct or if there is fault with the flash and is provided in high quality ABS housing with a rubber nose for added protection and durability.

The Clarke Dual Wheel Removal Trolley is designed to be used in conjunction with a suitable trolley jack to support wheels and tyres being removed / reftitted on heavy plant, agricultural and commercial vehicles. Four adjustable rollers on either side (8 in total) can be locked into eight preset positions, allowing for easy turning of larger, deep tread tyres. For added stability during transportation, the CHDDWD is fitted with a support bar which goes around the wheel as well as four castors (2 with brakes) and 2 support handles to assist with ease of manoeuvrability. One of the support handles can also be used as a jacking handle, making it ideal for single person operation.

Solid forged steel body with a satin chrome finish and enlarged striking head. 20mm fork span suitable for ball joint separation on most cars and small commercial vehicles.

Suitable for service/repair work on cylinder heads of most small to medium sized OHV engine.

Simple to use, clamp onto workpiece and guide your power tool to create perfect straight edges and accurate cross cutting, routing etc.

An invaluable accessory for the car boot for any road users, the Clarke Extendable Wheel Brace extends to 525mm which provides the extra torque needed to overcome really tight wheel nuts. Made from Chrome Vanadium Steel for a robust build that will stand the test of time, the product includes 2 double sided sockets in the most common wheel nut measurements (17, 19, 21 and 23mm) reducing the need to carry excess sockets.

The Clarke 10 piece Bearing Race and Seal Driver Kit is ideal for easily and effortlessly installing straight races and seals into brake disc hubs without damaging the bearing or axle housing. Included in the kit are 9 different sized collars with replacement O-rings and a sturdy handle. The collars will fit most standard wheel bearing sizes, up to 4x4 vehicles. The kit comes in a blow moulded carry case to securely store each collar and handle for easy of storage and transport.

Ideal for a wide range of vehicles including cars and motorcycles, the 30D airline tyre inflator from Clarke is a must have for any garage. Complete with a pressure gauge measuring in four different scales and featuring a 450mm rubber hose and 1/4" BSP fitting.

The CML7 is a serious piece of hardware designed to make bike maintenance easier and simpler for you and looks great in your garage too! Treat yourself with this super-strong, portable, hydraulic motorcycle lift. Designed to hold motorcycles of up to 360kg - it’s suitable for trade or DIY use - as a raised work platform for extended periods. The CML7 can raise motorcycles up to a maximum height of 680mm (620mm with safety bar in place) off the ground on any hard level flooring enabling a convenient, comfortable working height for cleaning, maintenance and service, saving unnecessary stress on knees and back. The base is assembled with wheels for easy manoeuvrability and lockdown feet …

The Clarke Manual Tyre Changer is a great tool to have in any garage, workshop or even mounted in the rear of a van. Allowing for tyres on wheels up 21” to be changed. Heavy duty steel construction with a tough powder coated paint finish.

A comprehensive 7 piece panel beating set, complete with various hammers and dollyies for a variety of jobs. Supplied in a tough moulded case and featuring hickory shafts for strength, durability and more comfortable grip.

Parts Washer brush and hose. Excellent for cleaning automotive and machined parts this brush and hose works by connecting to the flexible pipe of Clarke CW1D, CW2D, CWM20 and CW40 parts washers WARNING: This product is not suitable for use with paraffin, thinners or solvent-based part washer fluids.

The safest and cheapest way of lifting a car for repairs and maintenance. Suitable for most standard cars, plus ramp extensions for cars with low valances are avaliable. Sturdy steel angle construction finished in semi gloss paint.

Part of a new range of boltless shelving from Clarke, the CS41000BO shelves combine tough steel construction with quick and easy boltless assembly (only a hammer is required). High quality 8mm chipboard shelves hold up to 1000kg (evenly distributed), and feature adjustable height. Wide, spacious design allows for ample storage space, while a durable powder coated finish protects the shelves from damage.

Heavy duty steel construction ideal for industrial applications in factories, stores and warehouses. Each shelf is capable of withstanding up to 800kg in weight (evenly distributed), while the laminate covered fibreboard shelves are not only strong, but easy to keep clean too. Easy to assemble and simple to adjust, these high visibility shelf units are ideal for any industrial area.