Car Service Station Equipment Laser Tools

240v Circuit testers2 Piece set240 Volt onlyRoHS compliantCE CertificatedGS approved

Genuine Laser Tools 0108 GEN2 Force Nut

Part of the Body Shop range of toolsGrips most sheets of wet and dry sanding materialFlexible for a smooth contoured finishRubberDesign helps protect fingersBlack

17 | 19 | 21 and 23mm socket options on 4 way wheel brace.Sizes: 17 | 19 | 21 | 23mmSpin off actionGood leverageBlack coated for rust protectionSuitable for most vehicles

This robust chain wrench has been designed to remove all oil filters upto 120mm diameter. This robust chain wrench has been designed to remove all oil filters upto 120mm diameter.Chain style for added grip.1/2"D.The chain is simply located around the filter and turned by a 1/2"D ratchet or 21mm spanner.The chain will tighten to the diameter of the filter.

This strap filter wrench can be used in awkward areas with the help of any 1/2"D ratchet, power bar or extension bar. Can also be used with 21mm spanner. Extends upto 120mm.This strap filter wrench can be used in awkward areas with the help of any 1/2"D ratchet, power bar or extension bar.Extends up to 120mm.1/2"D.Or use with 22mm spanner.Time saver.

Self adjusting, heavy duty strap filter wrench for removing oil filters up to a diameter of 135mm or any stubborn componentHeavy duty strap filter wrench for removing oil filtersSelf adjustingGives access in awkward areasErgonomic handleExtends up to 135mm

This T-bar Spark Plug Spanner has a special T-Bar handle for use in confined areas.Single HexT-bar for greater leverage with 140mm handleUniversal joint function for improved access.Coated grip handle.21mm Hex available (Part No 0247)

This T-bar Spark Plug Spanner has a special T-bar handle for use in confined areas.Single HexT-bar for greater leverage.Universal joint function for improved access.Coated grip handle.16mm Hex also available (Part No 0246)

For locating short circuits, faulty lights and blown fuses, only suitable for automotive use. For locating short circuits, faulty lights and blown fuses.Cap to protect probe when not in use.Spare bulbs Part No. 2954 (2).6 | 12 | 24volt.CE certificated. For automotive use only.

For separating ball joints this tool uses the scissor method. Always grease threaded bar before and after use.Scissor type.Removes ball pin housing on steering arms.Carbon Steel.Thrust nut for leverage.Width of Jaw 30mm, depth of Jaw 18mm, Maximum opening 50mm

For separating ball joints this tool uses the forked, leverage method.For separating ball joints this tool uses the forked, leverage method.Fork dimensions: internal 14mm, thickness of shaft 22mm, overall length 200mmManufactured to ANSI and DIN standards.Long version available.Secure jaws, short shaft

This Piston Ring Compressor tool is necessary for the installation of pistons into the cylinder block. The compressor folds around the piston, holding the rings in their grooves and allowing the piston and ring assembly to slide into the bore without damaging the pistons or rings. For pistons 53mm to 125mmAdjustable 53mm to 125mm.For installing pistons into cylinder block.Allows piston and ring assembly to slide into the bore minimizing damage.Key handle allows compressor to be tightened.Time saver.

This 'C' type Valve spring compressor is suitable for small to medium engines and has a 150mm throat clearance | 70-135 jaw opening. Adjustable collet release adaptors - 25 and 40mm.C type for overhead valves.Petrol or diesel engines.Collet release adaptors 25-40mm.Auto lock with 70-135mm jaw opening.Throat clearance 150mm.

For medium to large engines - petrol or diesel. 90-150mm jaw opening. 150mm throat clearance. Fixed 25mm collet release adaptor.C type.For medium to large engines - petrol or diesel with deep seated valves.90-150mm jaw opening.150mm throat clearance.Fixed 25mm collet release adaptor.

With 3 security clamps for safety Secure clamps for safety.Maximum load 1200kg. Three clamps.Extends to 250mm (max).Safety brackets.

Complete with 7 adaptors (sizes: 15 | 16 | 17 | 19 | 20 | 21 | 25mm) to align the clutch disc when replacing the assembly.Aligns the clutch disc when replacing the assembly.For single plate clutches and for use on flywheels with centre pilot bearing.Knurled grip.Adaptor sizes: 15 | 16 | 17 | 19 | 20 | 21 | 25mm.Includes cone adaptor for sizes over 25mm.

Laser Tools 0360 Die Bar

Part of the Laser engine timing tools range this tool holds the cambelt in place on the crankshaft pulley. It is universally used and has OEM numbers 0132AK and 4533-TAD allocated. It is a component part and appears in several bespoke Laser tool kits.Timing belt clipHolds belt on crankshaft pulleyUniversal useOEM 0132AKOEM 4533-TAD

Laser Tools 0411 Locking Wheel Nut Socket 17mm 1/2"D

Laser Tools 0412 Locking Wheel Nut Socket 18.5mm 1/2"D

Laser Tools 0413 Locking Wheel Nut Socket 21.5mm 1/2"D

Laser Tools 0414 Locking Wheel Nut Socket 26mm 1/2"D

Part of the deep impact socket range34mm1/2"DFor Renault Hub NutsChrome Molybdenum78mm long x 6pt (single Hex)