Car Service Station Equipment Laser Tools

A fully adjustable and universal EV battery lifting system, suitable for all types of underslung/skateboard style of EV batteries (max SWL: 700kg), suitable for both four and six point lifting requirements. Made in UK.Main lifting beam with moveable lifting eye, for use with workshop lifting hoist/engine crane (1 tonne model required, Part No. 8337).Three transverse beams, with adjustable lifting brackets (2x beams for 4-point lifting, 3x beams for 6-point lifting).Six adjustable chain slings, plus 6 each of M12, M16 & M20 eyebolts for attachment to EV battery lifting points.SWL: 700kg, tested to 50% overload capacity. UK Registered Design.Specifically designed for lifting & moving EV batteries …

Adjustable mobile bench, specifically designed to aid the removal of under slung EV batteries (max SWL: 800kg) from the vehicle and move them around the workshop for safe storage and/or repair. Made in UK.Mobile bench with individual height adjustable heavy-duty castors, allows for height/tilt adjustment (70mm max) to ensure batteries remain level & in alignment with the vehicle when either removing or installing.6 x 2 (150 x 50mm) rubber wheels with safety locks (400kg capacity per wheel), fitted to height adjustable legs, with threaded adjustment and thrust bearing. Use with 13mm Hex ratchet, spanner or socket.Dimensions: 1500 x 1020 x 780mm (with wheels raised). Tested to 25% overload capacity.…

For the installation and removal of slotted bearing bushes on HGV spring suspension. Includes a 12 tonne hydraulic cylinder but supplied without the hydraulic pump. Installation protects the bush using the parallel working tension elements. Suitable for use on the vehicle. Safe and easy to use.

Originally Developed for OEM customers, this 12v powered brake bleeder has an adjustable fluid pressure output from zero to 3.5 bar (50psi). The advent of electro-hydraulic braking systems has meant that some motor manufacturers are specifying a need for pressure brake bleeders that can operate at a higher pressure than required with conventional systems. The 8395 has been developed to meet this requirement as well as maintain the ability to be adjusted for lower pressure applications. Note: for safety reasons and to prevent vehicle damage always set machine to LOW when first connecting up.For maximum portability, this brake bleeder has been designed to be used with a 5L brake fluid container …

An essential set of emergency safety equipment for any workshop where there is a potential risk of an EV fire (or EV battery fire), creating a threat to personal health & safety, and/or risk to premises and property. If the potential for a fire is suspected, an infra-red thermometer will identify possible hot-spots within the vehicle/battery, and the chemical cartridge mask will keep technicians safe from any noxious gases which may be escaping unseen. The vehicle fire blanket should be used to cover the suspect vehicle in order to starve any potential fire from oxygen, and thus minimise potential risks until the emergency services can attend. Posts and chains, along with warning signs will …

Pressurised Brake BleederMade from a Stainless Steel case with a reservoir tank that has a 5 litre capacity which enables the entire braking system fluid to be replaced in one fill without the risk of the reservoir running dry.The internal pressure pump is conveniently powered from the vehicles 12 volt battery. Pressure adjustable upto 2.5Bar (36psi)Supplied with catchment bottle and a syringe to remove old fluid and to help set the level.Suitable for both hydraulic brake and clutch systems. Supplied with a 44mm European brake fluid reservoir adaptor.

Essential Cylinder Head Rebuild Kit for VAG and Porsche CR Diesel engine. Equivalent to the OEM tooling required to allow the camshafts to be correctly fitted into the cylinder head. This is necessary because the cylinder heads on these engines are designed with a camshaft retaining frame that splits from the cylinder head along the centre line of the cam bearing capsApplications cover: VAG 1.6, 2.0, 2.7, 3.0, 4.0, 4.2 and Porsche 3.0 TDi Common Rail EnginesRequired when reassembling the cylinder head after top end service or repair (for example when replacing followers, camshafts or camshaft drive gears) For timing belt replacement or refitting the cylinder head after rebuild on 1.6 & 2.0 TDi …

For the removal and installation of 2nd generation hub and wheel bearingsApplications: Audi A2, Volkswagen Lupo, Fox, Polo, Multivan, Toureg, Transporter Skoda Fabia, Roomster Seat Ibiza, CordobaFor 62mm, 66mm, 72mm and 85mm bearings. The extraction adaptor (572-6) for GEN2 bearing kits has been redesigned to allow the extraction of the relevant bearings without removing the ABS sensorGeneration II style wheel bearings are a wheel bearing and drive flange that cannot be separated.By using clamshells and force plates/pins the tool ensures the loads of insertion are taken only on the outer race of the bearingReplacement Force Screw available - Part No 0454. Replacement thrust bearing available …

Electric vehicle battery fires can produce very high temperatures if left unchecked. The Laser 8396 fire blanket has been introduced to help reduce and control the risk of a vehicle fire spreading to other nearby structures and vehicles by starving the fire of oxygen and thereby keeping the temperatures under control. It should be noted that EV battery fires are self-oxygenating so a fire blanket can only help control the fire, it may not fully extinguish the fire. The 8396, once deployed should not be removed until trained fire fighting personnel have fully assessed the situation.Size 6 x 8 meters, thickness 0.45mm.Material E Glass cloth coated with silicone. Can withstand direct temperatures …

Designed to allow the technician to pull off heavy HGV wheel hubs in a controlled manner. Supplied with multiple wheel stud adaptors and an adjustment range of 110 to 448mm PCD.Applications include but not restricted to: Fuso, Hino, MAN, DAF, Mercedes-Benz, Renault, Scania, Sauer, Volvo.Thread adaptors include M18 x 1.5mm, M20 x 1.5mm, M22 x 1.5mm, M24 x 1.5mm, M30 x 1.5mm, 7/8 BSF.Supplied with 3 axle pressure plates (95mm Dia. 110mm Dia. 90mm Dia.).Always keep threaded adaptors & the force screw well lubricated with clean molybdenum disulphide grease.Supplied in a metal tin for safe workshop storage.

Complete glow plug tip extraction tool set for M8, M9 & M10 glow plugs supplied without cleaning tools. If cleaning tools required, please see Laser Part No. 6646.Applications include: M10 x 1mm, M10 x 1.25mm, M9 x 1mm, M8 x 1mm glow plug tip extraction tools.Unique extended drill bits with crimped and welded ends for increased access and a built in depth control collar to ensure the maximum depth cannot be exceeded.Specially machined thread taps, crimped and welded to extra-long extensions for increased access.Due to the size of individual threaded components and the nature of the task, all components should be considered consumable. Spare parts are available.

The Laser 8559 is a Digital, Battery Operated, CO Gas Analyser which measures CO emissions in the 0-10% (100,000 ppm) range, using a unique electro-chemical sensor. The unit features a rugged rubber boot with magnets, for protection, USB charger for the re-chargeable long-life batteries and integrated water trap with replaceable filters. It also features a unique wireless module, to allow for connectivity with a range of peripheral devices, thus providing future-proof functionality. Tests the performance and safety of any fossil fuelled /petrol engine and can also be used to test in-vehicle air quality, cab heaters, motorbikes, scooters, generators etc.Measures CO ( 0-10% / 100,000 ppm ). Features …

The Laser HGV brake disc press kit allows the user to quickly and easily push off the floating brake discs found on many modern HGV and commercial vehicles. The high load short rams are designed to sit between the disc and the back of the hub allowing force to be applied to push the disc off. The kit is equipped with 2 control valves allowing the pressure to be applied to both or one ram at a time as required, and is supplied in a blow mould case for storage.14 tonne hydraulic rams with individual control valves on one control block.2 hydraulic hoses 100mm long. Ram body fixed height = 83mm, ram extends by 45mm.Applications include: DAF, Renault & Volvo commercial vehicles.Also suitable for …

A portable mains charger for use on any BEV (Battery Electric Vehicle) and PHEV (Plug-in Hybrid Electric Vehicle) that uses a Type 2 connector. Suitable for use with a 32A three phase workshop power supply, with a maximum power output 22kW. Supplied in a zip-up carry-case so that it can be kept safely and tidily in the vehicle when not in use.5m long BEV/PHEV charging cable with controller, featuring a Type 2 vehicle plug (female) to 32 amp three phase Commando plug (red) for workshop charging, complete with carry bag.Three phase voltage up to 415V AC, for rapid charging up to 22kW.Tested to 2,500V DC. Operating temperature: -30C to +50C. Connectors made from durable polycarbonate with copper …

Part of the Laser range of tools for the WorkshopUniversal Press Support Block, designed to provide a stable, yet adjustable support base for vehicle hubs, and other complex shapes, to allow bearings to be pressed out with easeSupplied with adjustable, heavy duty, steel threaded columns, and an adjustable spacer block to provide additional support - Side Guard Plates for added security and safety - Safety retaining screws prevent risk of movement of the block on the pressManufactured in the UK, from Aircraft Grade Structural Aluminium. Parts of this kit are registered design CE marked and supplied with Test Certificate of Conformance SWL 50 tonnesLength : 285mm, width : 200mm, depth : 50mm, …

Fitted with a powerful 12v delivery pump capable of delivering up to 17lit/min. working pressure 40 PSI.4m long power cable for ease of connection to the vehicles 12v battery.4m long EPDM delivery hose with auto shut-off nozzle. Large diameter wheels (200mm), total dimensions H= 1040mm, W= 520mm, D= 440mm.Designed for use in both car and commercial vehicle workshops. AdBlue is a registered trademark of the Verband der Automobilindustrie e.V. (VDA)

Genuine Laser Tools 6772 Hybrid Safety Tools Pack

Comprehensive engine timing tool set for Italian cars. Includes 24 tools for camshaft alignment, tensioning and crankshaft alignment to cover a wide range of petrol and diesel engines packed in a metal case.Comprehensive engine timing tool set for Italian cars.Includes 24 tools for camshaft alignment, tensioning and crankshaft alignment.Supplied in metal storage case.Fitting guidelines and applications included.Also available without the storage tin for use in Roller cabinet 5084.

A customised 7 drawer lockable tool cabinet, for securely storing and organising Hybrid / EV tools and safety equipment in one place. It can be set up in the workshop and moved next to the vehicle being worked on, within the restricted area, ensuring the technician has the hybrid/EV tools and PPE required easily to hand. It features customised external supports for storing safety barrier posts and bases, together with a bracket for an insulated rescue pole, freeing up valuable storage space and keeping equipment located together.Lockable 7 drawers with roller bearing runners. Overall size: 682 x 460 x 804mm. Maximum capacity: 400kg.Includes unique supports to store safety posts, bases and rescue …

The Laser 8824 kit has been developed to allow the user to align, set and check the camshaft timing of the Volkswagen Group EA 211, 4 cylinder TSI petrol engines* without the need to resort to computer based alignment tools. The 8824 utilises a battery powered digital inclinometer combined with accurately manufactured adaptors and alignment tooling to ensure the camshafts are set correctly. There should be no need for interaction with the vehicles OBD system if following the correct Laser tools procedure while making the alignment. *For earlier engines use with Laser Part No. 8866.Applications include: Audi (from 2017), Seat (from 2017), Skoda (from 2017) & Volkswagen (from 2017).Engine applications …

A versatile and heavy duty combination hub puller kit that can extract drum/disc/hub assemblies when used with the force screw method or for stubborn hubs, the slide hammer (4.3 kg) method can be used. Tool can also be used to press out the driveshaft/CV joint if this is necessary.Covers 3/4/5/6 Metric Stud Hubs - Sizes M12 x 1.5 & M14 x 1.5 NB: 3 of 5/3 of 6Includes a threaded spindle for pushing out half shafts and 4.3kg slide hammerSize range PCD: 90-130mmApplications: Alfa Romeo/Audi/BMW/Citroen/Fiat//Ford/Mazda/Mercedes-Benz/ Peugeot/Renault/Seat/Skoda/Vauxhall/Opel/VolkswagenThreaded parts and adaptor are consumable items Replacement Force Screw - Part Number 0632 Replacement Adaptor - …

A specialised timing tool kit for the M60/62 Vanos engine fitted to BMW and Range RoverFor full application list go to www.toolpoint.co.ukOEM cross reference and instructions includedCovers engines fitted to 4.4 Range Rover (2003-2005).Other tools recommended are 11 2 443/11 2 444 (though we believe these are not essential to complete the task)Also fits Morgan Aero 8 with M62 engine.

A portable mains charger for use on any EV (Electric Vehicle) and PHEV (Plug-in Hybrid Electric Vehicle) that uses a Type 2 connector. Suitable for use with a 16A three phase workshop power supply, with a maximum power output 22kW. Supplied in a zip-up carry-case so that it can be kept safely and tidily in the vehicle when not in use.5m long BEV/PHEV charging cable with controller, featuring a Type 2 vehicle plug (female) to 16 amp three phase Commando plug (red) for workshop charging, complete with carry bag.Three phase voltage up to 415V AC, for rapid charging up to 22kW.Tested to 2,500V DC. Operating temperature: -30C to +50C. Connectors made from durable polycarbonate with copper alloy contacts.…

The auto darkening welding helmet is designed to protect from sparks generated from standard welding conditions and also includes UV/IR protection (DIN16) to provide additional protection. The inclusion of a respirator provides greater respiratory protection against fumes, particles and dust.Dark shade: DIN 5- 9 & 9-13. Dark to clear delay time: 0.1 0.8 sec. Clear to dark switching time: 1/10000 sec. Clear state: DIN 4.Suitable for MIG, TIG & arc welding. Includes grinding & cutting functions.Helmet power: solar cells & lithium battery 600mAh. Includes low battery and self-check function. Automatic power on/off. Respirator power: battery capacity 6000mAh, powered from Lithium-ion battery. Includes …