Amplifiers

Support MQA CD Your CD player's digital output (optical or coaxial) can be fed to an MQA de- coder. The MQA decoder can restore the original high-resolution signal heard in the studio and confirm it, using the authentication signature.SMSL M500 MKII support MQA CD. Aluminum alloy CNC precision machined housing Adopt anodizing technology and chamfering process High-end appearance, delicate touch, exquisite and durable Tempered glass panel Higher light transmittance highlights simplicity and beauty With 1.9-inch IPS full-angle screen, high-end and durable Exquisite layout of the upper and lower floors to maximize the use of space Upper audio, middle digital, bottom power, complementary

CEQ231 2 x 31-band graphic EQThe CEQ231 is a 19" 2U rack mounted dual 31-band graphic equaliser, which allows the adjustment of labelled frequencies via the individual cut/boost faders. Up to 12dB of cut or boost for frequencies ranging from 20Hz to 20kHz for ultimate EQ control.2 x 31-band 1/3 octave ISO spacingRF filtered servo-balanced inputsConstant Q each bandBypass switch for EQ comparisonLow-cut switch each channelGain control each channelLED VU meters19" rackmount 2U

Headphone Amplifier / Total Connected Load 40 W / Number of Channels 1

Super audio reproduction ability with ultra low distortion The E70 uses ESS SABRE flagship DAC ES9028PRO. ES9028PRO has a 32-bit 8-channel HyperStream I1 architecture. In the application of E70, every 4 channels are connected in parallel as one channel,achieving high performance and high sound quality at the same time. Brand new IN conversion A brand new IN conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion,lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip. LDAC 24bit96kHz

The Elipson Music Centre Connect HD is jam-packed with fantastic features that will augment your music. Bluetooth offers wireless connectivity to your smart devices so you can stream your music with the Ethernet socket providing WiFi and Network connectivity which can create multiroom listening. Equipped with a built-in CD player the Music Centre Connect will magnify your favourite CDs in stunning audio quality. This receiver provides 2 x 120W of power and MP3 FLAC WAV AAC AAC+ codes which will supply incredible sounds. The FM DAB and DAB+ tuner will gift you with all your favourite local and national radio stations. The subwoofer output and headphone output will create an immersive music experience.…

The Black Lion Audio Auteur Quad is a four channel mic preamp based on the Auteur MkII preamp. Thanks to Edcor transformers offers fat, colorful vintage sound. It features meters on all four channels as well as DI inputs from 500 series Auteur on the first 2 channels, switchable 48 V phantom power per channel, pad Mic In -10 dB / DI In -13 dB, switchable phase reversal. The preamp is extremely versatile and ideal for recording bands, drums and orchestral performances. DI Output: Yes UK/EU Power supply included: Yes Microphone Input: Yes Type: Preamp Phantom Power: Yes Application: Studio;Recording;Stage Rackmountable: Yes Controls: Pad;Phase Switch;Gain Frequency Range: 10 Hz - 30 kHz Impedance: …

DI Box / Desktop / Number of Channels 2

Parameters: The latest version, supports LDAC, HD, AAC, at the same time, supports Android and , LDAC supports 24BIT94K transmission and can be compatible at the same time! Truly lossless transmission, the same level of sound quality as CD! LDAC can reach up to 990kbps. -X HD maxes out at 576kbps. 5.0 Bluetooth CSR8675+PCM5102A decoding, support LDAC, HD. True 5.0 module. The PCM5102 decodes independently and adopts the I2S protocol transmission, which is much the Bluetooth playback board without decoding output. The decoding further improves the sound quality and resolution. Not comparable to general toy-level bluetooth audio output. The signal-to-noise ratio is 112db, and the 2.1V RMS audio …

Fully balanced structure, Pure sound quality ▶️ The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 II/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC ▶️ The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4Ω load, THD+N

Support Bluetooth: With LDAC, APTX/HD, SBC, AAC supported. Support MQA& MQA-CD, DSD512, LDAC. When the analog sound is converted to a digital signal,time blurring will occur, blurring transient signals over time. As a result, our ears cannot tell where a single sound comes from, the comparison between recorded music and "live performances”is unremarkable! MQA can eliminate this distortion and create a true 3D sound field, which is different from any sound you have ever heard. Uses dual high-end ES9039MPRO D/A chips from ESS Company, and uses all 8 channels, with a total of 11pcs OPA1612A op-amp. USB utilized the 3rd generation XMOS XU316, a true 32-bit USB solution, supports DOP and

S460-WIFI Multi Streaming AmplifierClass-D dual stereo amplifier delivering up to 4 x 60W output with Bluetooth and internet streaming capability. Two internal amplifiers have individual volume control, allowing different music levels in 2 separate areas. Controlled from an Android or iOS smart phone, the S460-WIFI is compatible with freely available apps to stream music and podcasts directly from a WiFi or wired RJ45 network connection. Embedded internet radio offers high quality digital audio from almost any online radio station or podcast available worldwide. Subscription services can store online playlists which can be cast directly from the internet without requiring the smart phone to …

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

BT 5.0 with aptX HD capability (24 bit, up to 48 kHz) Analog volume control with motor potentiometer 2 pairs of RCA line inputs, variable output for subwoofer or other amplifiers Sturdy aluminium housing protects against interference, gold-plated RCA connectors Includes IR remote control