Amplifiers

Microphone Pre-Amp / Desktop / Number of Channels 1

Styled after the iconic Laney Lionheart range, the Laney Ministack is a small amp with a big sound, Bluetooth enabled and perfect for anywhere in the house, backstage or practice. The Ministack-B-Lion model features a clean & drive channel, gain, tone and volume dial, guitar input, Aux in, On-board tape style digital delay with level control, headphone socket and the unique Laney LSI – Laney Smartphone Insert. The LSI allows you to connect your amp to your favourite guitar tone generating app to access all your favourite guitar tones.
Built-in Effects: Yes
Bluetooth: Yes
Headphone Output: Yes
Connection for External Speaker: No
Controls: Gain;Delay Level;Tone;Drive;Volume;Delay;Level
Number …

Life sound doesnt have to be labor. The LD Systems X223 Active Crossover provides high quality sound reproduction and allows you to manage your live signal routing effortlessly. With outstanding build quality the X223 can keep up with rigorous touring schedules and demanding live sound applications. The crossover offers great signal transmission across the 20 Hz to 20 kHz frequency response thanks to the 93 dB signal to noise ration and low harmonic distortion. The Crossover is also versatile to operate with 2 way stereo or 3 way mono modes available.

The Radial StageBug SB-4 is a compact active direct box that has been optimized for use with piezo transducers. This enables violin, dobro, mandolin, cello, upright bass and other instruments that are best amplified using a piezo to be connected without compromising the tone or frequency response. The design begins with a 1/4 "" input for the instrument pickup. Unlike typical direct boxes that have a 1meg-ohm input impedance, the SB-4 features a very high 5meg-ohm impedance that smoothes out troublesome peaks that give piezos a bad name. The higher impedance also broadens the frequency response for a more natural and pleasing sound. The active circuit performs the high-to-low impedance conversion …

Adastra UA30 - 30W RMS Mixer/Amplifier
100V mixer-amplifiers with an integral mixer in a half width 1U housing. 3 switchable mic/line inputs an RCA line input and a 3.5mm Aux input are governed by front panel volume controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.

• Supplied with hardware for rack-mounting 2 units
• 5 input channels
• 24V fire alarm mute contacts
• …

Power module for AT892 MicroSet. Also suitable for use with any Audio-Technica Wireless Essentials microphone terminated with 4-pin locking connector. The AT8539 allows you to convert your wireless microphone into a wired model. Comes equipped with a snap-on belt clip.
Package Contents: Clip;Manual
Impedance: 250 Ohm
Switch: Yes
Type-A Connector: XLR Male
Power Supply: 48V Phantom
Made in: Japan
Type-B Connector: 4 Pin HRS connector

Switch: control a pair of speakers either from a stereo amplifier or a surround amplifier - easy to switch without cables.
Multifunctional: the switch also offers the possibility to switch to 2 different pairs of boxes with 2 amplifiers.
Safe: The high-quality rotary switch with zero position protects the connected devices - deep high-quality banana sockets provide the cables with a secure grip.
Sound: thanks to the raised cable cross section, the AMP-S Pro offers optimal signal transmission without distorting the sound of the system.
Quality: the AMP-S Pro has a sturdy metal housing and a 4 mm thick aluminium front plate in a brushed finish.

The Madison MAD1000 is a compact and affordable stereo amplifier that delivers up to 2x30W of power RMS at 4 ohms. It features a 30-20kHz frequency response, signal-to-noise ratio of >77dB, and bass, treble, and volume controls. The amplifier also includes Bluetooth connectivity for wireless music streaming from your smartphone, tablet, or other Bluetooth-enabled devices. Key features:Compact and portable design: The amplifier is only 244x202x67mm and weighs 2.9kg, making it easy to transport.Powerful audio: The amplifier delivers up to 2x30W of power RMS at 4 ohms, which is enough to drive most bookshelf speakers.Wide frequency response: The amplifier covers the frequency range of 30Hz to 20kHz,…

Jaw-dropping, room-filling sound with advanced acoustics powered by computational audio. Seamless integration with Spark App. Bluetooth speaker, audio interface, rechargeable battery and headphone/line out.Play whenever and wherever you feel like it with this app-supercharged tiny beast. We’re talking seamless integration with the Spark App chock full of amps, pedals, Auto Chords, Smart Jam, 50,000 tones on the cloud, and so much more.It’s easy to create your own tones, or download over 50,000 tones from the ToneCloud community. Get chords for millions of songs. Use AI-powered Smart Jam to learn and jam along with you, and much more. Spark GO comes stocked with 33 amps and 43 effects …