Amplifiers

The BOSS BAS-1 Amplifier Stand cradles your favorite combo guitar amp at the perfect angle for monitoring and sound projection, whether at home, on stage, or in the studio. Constructed with heavy-duty steel for long-lasting durability, the BAS-1 features an adjustable tilt-back design and a telescoping support arm that accommodates a variety of cabinet widths. The stand collapses for easy travel, with a locking cam and quick-release lever for fast set up and tear down. And with adjustable feet, you can achieve wobble-free stability when using the BAS-1 on slightly uneven surfaces.
Colour: Black
Width (cm): 69.4
Made in: China
Minimum Height: 445 mm
Load Capacity: 21 kg
Maximum Height: 520 mm<…

Stereo headphone amplifier. 4 separate headphone amplifiers in one housing. 1 level control each per amplifier. 6.3 mm stereo input. 6.3 mm stereo outputs. Frequency range: 20 - 20000 Hz. Input signal: 300 mV. Output signal: 2 x 16 mW/8 Ohm, 2 x 35 mW/32 Ohm, 2 x 15 mW/600 Ohm (per headphone). S/N ratio: 64 dB. THD: 0,1 %. Power supply: via encl. plug-in power supply. Dimensions: 117 x 93 x 40 mm. Weight: 560 g. Colour: Black
USB: No
Inputs: Jack TRS 6,3mm
Headphone Output: Yes
Number of Channels: 4
Power Supply: Adapter
UK/EU Power supply included: Yes
Frequency Range: 20 Hz - 20 kHz
Made in: China
Battery Operation: No
Colour: Black
Impedance: 32 Ohm
Outputs: Headphone Jack 6,3mm…

IWA In-Wall Amplifiers with BluetoothStereo amplifier units for background music and public address in a minimalist housing for installation into cavity walls and ceilings. Class-D amplifier design operates cleanly and efficiently with minimal heat dissipation, combined with an internal digital switch-mode power section, which enables easy connection directly from the local mains supply. Bluetooth compatibility enables wireless streaming of audio files from a smart phone or other enabled device in addition to 3.5mm Aux input and an optical digital audio input, ideal for integrating into A-V systems. For discreet and trouble-free installation without any need for table-top or cabinet installation,&hellip;

Phantom power adapter that runs on AA batteries and provides powering for electret condenser microphones when phantom power is not available. It features an on/off switch and a bass rolloff filter. Connectors are standard XLRm to mini XLRm. It can be used with various Audix microphones, including the ADX20iP, ADX40, ADX60, f90, MicroD, or MicroHP models.
Made in: China

The iFi Audio Go Link Headphone Amp & DAC is the latest addition to iFis GO series and a game-changer for wired headphone users. This ultraportable DAC/headphone amp dongle links corded headphones and earphones to digital devices that lack a 3.5mm headphone output. But its not just a connector; the GO link significantly enhances sound quality with its sophisticated digital-to-analogue converter and headphone amp circuitry outperforming the audio tech in mobile devices and computers.

Microphone Pre-Amp / Desktop

Compact one-channel microphone preamplifier with switchable 30V phantom power that provides one balanced microphone input and one balanced 6.3 mm input. It also features a Gain control up to 50 dB, and clip LED indicators. Dimensions: 113 x 92 x 40 mm. Weight: 345 g.
Phantom Power: Yes
Power Supply: Adapter
Made in: China
Microphone Input: Yes
Frequency Range: 10 Hz - 30 kHz
UK/EU Power supply included: No
Battery Operation: No

Balanced Line Output Switch. Palmer PEABO is a Balanced Line Output Switch with two inputs and one output. Thus, it is the perfect choice for routing a signal to either one of two possible inputs. Switch your vocal mic between the FOH and monitor mixing desk to communicate with the monitor mixer or the band on stage. Two different sound configurations: to switch between different effects or sounds on your microphone, e.g. a "telephone effect" or more levels of reverb. Run the outputs of the PEABO into two channels of the mixing desk, that you can configure differently. Now you can freely toggle between them on-stage at any time. You can also use the PEABO to route the signal to two rooms or …

DI Box / Desktop / Number of Channels 2

WA-215 Wall Mount Amplifier + Media Player with BluetoothCompact audio controller with 2 x 15W digital amplifier built into a single gang wall plate. Powered directly from 100-240Vac mains supply, the unit can be installed into a partition wall or 47mm back box and provides a minimal yet fully functional control surface. The WA-215 has an inbuilt USB/MicroSD audio player, an FM tuner and Bluetooth receiver. Key functions are operated from the front touch panel or by using the supplied IR remote control. Connections for 2 speakers, mains power, FM antenna and an external line input are provided at the rear on screw terminal Euroblock connectors. Trigger contacts are also included for media playback …

dimensions 44.5mm x 107mm x 89mm, Input Connections: XLR female balanced, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, thereby isolating two systems and reducing hum and groundloop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, totally passive audio interface that uses a pair of high performance transformers to totally separate input and output …