Amplifiers

AK4493S: The DX1 uses newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Plug and play turn your PC into a HIFI source: DX1 has more→a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. No adapter required: Like other USB device, the DX1 does not require an additional adapter for power supply. Only one USB cable can complete the power supply

RM-series 100V Mixer-Amplifier with DAB+, BT, USB/SD5-channel 19" rack-mountable mixer-amplifier, tailored to commercial sound installations to power 100V line speakers or standard speakers down to a more→4 Ohm load. Input options include XLR (with switchable phantom power), mic/line jack, and RCA line. Features an inbuilt DAB+/FM radio tuner, front-mounted SD/USB ports, and Bluetooth® connectivity, all controlled via an integrated media player for hassle-free playback. A switchable ‘voiceover’ feature automatically lowers the background music volume when a signal is detected via mic input 1 and rear panel 24V contacts can mute all except mic input 1 when triggered. Outputs on screw terminla are v…

It's all about gain and impedance. While some of the best sounding microphones out there are low-output dynamics and ribbons, pre-amplification can be challenging due to the gain and impedance require more→ments. Cloudlifters address this by giving passive microphone signals a major inline boost -up to +25db of ultra-clean gain- while properly loading the microphones' transformer for optimal performance. The Cloudlifter CL-1 is completely self contained, driven only by the phantom power from your mixer or preamp. Ideal for dynamics and ribbons alike, the CL-1 turns phantom power into the extra gain required for using passive microphones. The immediate dose of extra gain can make even a budget

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achi more→eve better performance and reduction ability than a single chip. Plug and play, turn your PC into a HIFI source : USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

T1 Vacuum Tube Tester. Features: The Product Measures the Cathode Current of the Power Tube for Bias Reading (at Low Voltage Side of the Tubes ). It Can Get the Reading Direct from the Current Meter. more→It Does Not Need Any Convert from MV to MA. It Can Be Work with All Kinds of Multi Meter (Digital Meter or Analog Pointer Meters) , at Range of 100mA or Above. Test EL84 6BQ5 EL34 KT88 7591 7591A 6P14 6L6 6CA7 6V6 5881 6550 KT66 KT100 KT120  Specifications: Maximum Power Per Channel: NO POWER Three Models Available: Model : T1 3.5mm Male Plug Copper Used for Excellent Conductivity. Outstanding Soldering Taken in Every Adapter. Package Included: 1 * T1 Tester 4 * Bias Current Probes 1 * AC/DC A…

D2R uses the DAC chip BD34301EKV and comprehensively optimises its performance to reduce its THD+N to -117dB USB uses XMOS XU-316, a true 32-bit USB solution, with PCM support up to 768kHz and DSD su more→pport up to DSD512. The all-new CK-03 clock processing circuit achieves ultra-low clock jitter, making the tact jitter of fiber coax as excellent as USB. Custom low noise porcupine linear power supply. specially developed discrete component-regulated power supply and multiple low-noise regulated power supplies provide a low-noise power supply for analogue circuits. Qualcomm's latest Bluetooth chip supports SBC, AAC, aptX, aptX HD, LDAC. High quality gold-plated input and output connectors. Newly …

Portable amplifier for acoustic instruments and mic. Fishman’s lightest and most portable amp now with the addition of Bluetooth wireless connectivity. The Loudbox Mini delivers the tonal quality that more→has made the Fishman name the standard for great acoustic sound. The Mini packs 60 watts of clean acoustic power, and has two channels featuring Fishman’s legendary preamp and tone control designs. The amp also features digital reverb and chorus for the instrument channel and reverb for the microphone channel. The Loudbox Mini sports an MP3 input and balanced XLR D.I. Output. Battery Operation: No Made in: China UK/EU Power supply included: No Offer Configuration: Standard offer

Packaged included: 1 x Audio Power Amplifier 1 x Remote control Specifications: Size: 26 * 29 * 10cm Rated voltage: 220V-240V 50 / 60Hz Rated power: 1200W Peaks: 2000W Rated frequency: 20KH - 20KHz S more→ignal to noise ratio: 90dB Standard impedance: 4 to 16 ohm Type of power amplifier: AV power amplifier Channel: 2.0 channel Total harmonic distortion: ≤ 0.5% Signal input sensitivity: 200mv (± 30mv) Microphone input sensitivity: 9 mv (± 2mv) Recording level output: 1V Auxiliary level output: 1V Support:USB Disk/Max 64GB SD Card(Not included) Colour: Black Features: -Support 4 way microphone input -LED display -2 tack output With EQ -Reverberation, fine tuning, balance, SD, USB interface.

Built-in DAC ,Supporting common digital signal inputs: The MX3s features an AKM DAC and is equipped with a Qualcomm Bluetooth chip, the QCC3040, providing exceptional USB, optical, coaxial, and Blueto more→oth input capabilities. This allows for easy connection of various audio sources, such as computers, set-top boxes, DVD players, smartphones and tablets, making it incredibly versatile. Nice Bluetooth performance: The MX3s supports Bluetooth protocols such as AAC, SBC, aptX, aptX-HD, and aptX Adaptive, achieving transmission distortion below 0.001%. It brings you an exceptional audio experience. Subwoofer Output: The MX3s has a built-in subwoofer output that can be wired for a full 2.1-channel

CG Series Guitar Amplifiers Classically styled guitar combo amplifier in a vinyl covered cabinet with metal corner protectors and basket-weave style grille cloth. Front control panel is recessed with more→retro "chicken-head" control knobs and additional features for Gain, EQ and outputs. Custom solid-state circuitry is voiced to produce authentic vintage-style clean and driven tones. PRODUCT FEATURES: Produce authentic vintage-style clean and driven tones Headphone output for practice Switchable clean and drive/gain channels Classic styling Output 60Wrms SPECIFICATION: Power Supply 230Vac, 50Hz (IEC) Speaker 300mm (12") Controls Clean volume, bass & treble, overdrive gain, (mid) contour, bass,…

Features: Particularly powerful with full 150W + 150W amplifier. 10 channels with XLR and Line mono inputs. 2-band EQ (HI & LOW) on each channel and 5-band graphic equalizer on the main. Built-in 16 k more→inds of LCD display digital effects. Built-in 48V phantom power for condenser microphone use. With USB & SD/ MMC Card input interface and LCD display. With speaker outputs(L & R) and main XLR outputs (L & R). Great for DJ, stage and karaoke to have a perfect sound effects. Specifications: Color: Dark blue Material: Metal Power adapter: US Item size: 46.5 * 31 * 13cm / 18.3 * 12.2 * 5.1in Item weight: 7.2kg / 15.9lb Package size: 51 * 37.5 * 18cm / 20.1 * 14.8 * 7.1in Package weight: 8.1kg / 17.…

Parameters: The latest version, supports LDAC, HD, AAC, at the same time, supports Android and , LDAC supports 24BIT94K transmission and can be compatible at the same time! Truly lossless transmission more→, the same level of sound quality as CD! LDAC can reach up to 990kbps. -X HD maxes out at 576kbps. 5.0 Bluetooth CSR8675+PCM5102A decoding, support LDAC, HD. True 5.0 module. The PCM5102 decodes independently and adopts the I2S protocol transmission, which is much the Bluetooth playback board without decoding output. The decoding further improves the sound quality and resolution. Not comparable to general toy-level bluetooth audio output. The signal-to-noise ratio is 112db, and the 2.1V RMS audio …

The ES903902M uses the newest ESS patented HyperStream IV Dual DAC technology, and advanced SABRE HiFi architecture. The ES9039Q2M delivers a performance level that will satisfy the most demanding aud more→iophile and pro-audio enthusiast. DL200 is capable of directly sampling PCM digital audio up to 32-bit/768kHz without downsampling. lt also supports Native DSD playback up to DSD512 without conversion. Optical/coaxial input supports DoP64 You can switch between 2 different USB modes in the menu. To use USB2.0, you need to install the driver and support 768kHz/32bit high bit rate audio files. Use the USB1.1 mode to support audio files up to 96kHz/24bit bit rate without driver, and directly connect …

The Topping LA90 Discrete Class AB Power Amplifier is a flagship amp with newly developed discrete NFCA technology. It can be configured in stereo or mono mode with the ability to control its own volu more→me and utilise two-step gain settings. Connect via the three provided balanced inputs with XLR or TRS interfaces. With a THD+N of less than 0.0001 per cent the LA90 Discrete reproduces music sources with exceptional accuracy. Its wide working range and low distortion under load make it suitable for various setups. Moreover the amplifiers high-precision CNC machined all-aluminium enclosure not only aids in the exquisite sonic detail but also offers reliable and fast heat dissipation for greater …