Amplifiers

The LEAK Stereo 230 Integrated Amplifier with DAC is the nostalgic audiophiles dream; while retaining the retro charm of LEAKs original and revered Stereo 30 from 1963 it is packed full of contemporary circuitry and connectivity potential. Despite returning to the market in 2020 with the Stereo 130 this new model from LEAK betters it with the addition of HDMI ARC improved power output an updated DAC and newer Bluetooth specs. As well as wireless streaming via Bluetooth and HDMI ARC for movie enthusiasts the Stereo 203 features a Phono (MM) input for optimised playback of your vinyl records as well as USB-B Optical and Coaxial inputs. Outputs include one for your headphones—assisted by dedicated am…

PLX2800 power amplifier, 2 x 1050W @ 4 Ohms

19" rackmount 2U power amplifiers with dual fan cooling and class H architecture for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. High power output stable down to 2 Ohms load per side can also be bridged mono to 4 Ohms. Switchable ground lift, bridge mode and clip limiter.
Bridge mode for high power mono operation
Output stable down to 2 Ohms
Removable handles for low profile install
Switchable clip limiter
Power rms @ 2 Ohms - 2 x 1400W
Power rms @ 4 Ohms - 2 x 1050W
Power rms @ 8 Ohms - 2 x 600W
Power rms bridge @ 4 Ohms - 2300W
Power rms bridge …

Whenever you need more headroom for any microphone in your podcast, recording studio or stage setup, the MIC BOOSTER CM-2 is exactly the tool you need to get a crisp and clean microphone signal in a robust and simple to use package. Both channels of the CM-2 can work with almost any dynamic or passive ribbon microphone. Its high-quality preamp adds an incredible +25dB of gain to your mic pre’s which increases headroom and allows you to dial in the perfect mic level at a much lower gain setting at the mixer thus leading to a cleaner sound. The simplicity and size of the CM-2 means you can set it up as close as possible to any mic anywhere in your studio or on stage. This minimizes the risk …

dimensions 44.5mm x 107mm x 89mm, Input Connections: XLR female balanced, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, totally passive audio interface that uses a pair of high performance transformers to totally separate input and …

The Radial StageBug SB-4 is a compact active direct box that has been optimized for use with piezo transducers. This enables violin, dobro, mandolin, cello, upright bass and other instruments that are best amplified using a piezo to be connected without compromising the tone or frequency response. The design begins with a 1/4 "" input for the instrument pickup. Unlike typical direct boxes that have a 1meg-ohm input impedance, the SB-4 features a very high 5meg-ohm impedance that smoothes out troublesome peaks that give piezos a bad name. The higher impedance also broadens the frequency response for a more natural and pleasing sound. The active circuit performs the high-to-low impedance conversion …

Summing Amp effect pedal. The device can combine two signals into one mono signal. It is equipped with one foot switch, two inputs and one output. Thanks to its features, it can send two signals to one amplifier or add a stereo signal to mono. The effect has a robust metal construction and is powered by a 9V adapter (not included).
UK/EU Power supply included: No
Power Supply: 9V;Adapter
Made in: USA