Amplifiers

Microphone Pre-Amp / Desktop / Number of Channels 2

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play, turn your PC into a HIFI source : USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

The Topping PA7 Class D Power Amplifier is capable of delivering up to 210W into a four-ohm load and 150W at eight ohms. Developed for discreet desktop setups this amps Class D circuit design is perfect for high power output and low distortion relative to its size. It also offers high efficiency and less heat generation making the PA7 the ideal companion for all your home audio devices and enhancing your favourite music films and TV shows with exceptionally low levels of distortion.The PA7 hosts a variety of inputs including XLR TRS balanced and RCA as well as a 12v trigger for system synchronisation and integration. This amp also features bypass mode meaning you can control the volume from …

Tube microphone preamplifier. The 676 offers a pristine high-voltage, Class-A tube preamp section that runs on 250 volts, so your signal can be as crystal clean or dirty as you need it to be. The 676 also incorporates the compressor/limiter design from the highly-sought after dbx162SL, as well as a 3-band parametric EQ with sweepable mids. The 676 provides audio professionals with the perfect channel strip for recording and live applications alike with its military-grade build and vintage-inspired controls, VU metering and state-of-the-art optional digital output card. It contains instrument input on the front panel, and microphone XLR input, microphone XLR outputs and line outputs on the back …

The counterattack of discrete amplifier: LA90 Discrete, an unprecedented performance benchmark will bring you a breathtaking listening experience. The newly developed discrete NFCA power amplifier reaches a new level of pristine sound and accuracy. The unprecedented level of performance will bring you the absolute amaze on the sound quality. You will experience the darkest background you ever experienced with jaw dropping clarity. Rock solid : The LA90 Discrete's housing is a high-precision CNC machined all-aluminum enclosure that provides exquisite detail and rugged protection. Passive cooling on both sides provides reliable and fast heat dissipation for the LA90 Discrete's amplifier

Use the high-end ES9038RO D/A chip from ESS, which is a DAC chip that reaches the industry's high index. The SNR is as high as 140dB, and the total harmonic distortion plus noise is -122dB. At the same time it is a 32-bit, eight-channel DAC chip,with high resolution and high dynamic frequency response, D1se achieves a low distortion rate of 0.00009% (-121dB). USB/Optical/Coaxial/Bluetooth 5.0 input, RCA/XLR output. Bluetooth 5.0 support aptX/ACC/SBC, USB asynchronization transmission, USB compatible windows 7/8/8.1/10, Mac OSX, Linux. All input ports support DSD transmission, coaxial and optical support DoP64! USB uses XMOS XU-216,Real 32bit USB solution, Support Dop and native DSDPCM up to …

It's all about gain and impedance. While some of the best sounding microphones out there are low-output dynamics and ribbons, pre-amplification can be challenging due to the gain and impedance requirements. Cloudlifters address this by giving passive microphone signals a major inline boost -up to +25db of ultra-clean gain- while properly loading the microphones' transformer for optimal performance. The Cloudlifter CL-1 is completely self contained, driven only by the phantom power from your mixer or preamp. Ideal for dynamics and ribbons alike, the CL-1 turns phantom power into the extra gain required for using passive microphones. The immediate dose of extra gain can make even a budget

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

Features: It is a mini 2.1 channels power amplifier with LCD display, backlight design. Supports 40W + 40W left and right channel output and a 68W mega bass channel output. Treble, bass, subwoofer, and master volume adjustment buttons for easy operation. Can read U disk and memory card, plug and play, supports BT wireless connection. With remote controller, full-featured remote control is supported. Specifications: Rated Frequency: 20-20KHz Left and Right Channel Power: 40W+40W Subwoofer Channel Power: 68W Resolution: 47K Distortion Rate: 0.4% Signal-to-noise Ratio: 80dB Impedance: 4-8 ohms Material: Aluminum alloy Color: Black Product Size: 12.5*17.6*4.5cm Package Size: 27*21*6.5cm Gross Weight: …

Phono Preamplifier

Supports high-resolution audio▶ The E30 II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD

Bose FreeSpace IZA 2120-LZ 2.0 channels Black

The Monitor Audio IA125-4 is a compact and versatile four-channel custom installation amplifier. It can be configured to deliver four channels at 125W and two channels at 250W. In power-sharing mode it can even support Monitor Audios THX Ultra-certified Cinergy 100 speakers for a large system. This is a great amplifier for two-zone stereo applications as well as height channels within your home theatre system. This is all packed into a rugged 1U half-size space-saving design - perfect for any setup you have.