Amplifiers

+/- 6/12dB gain, >108dB dynamic range, switchable bypass, clip LED, 50Hz low cut filter (12dB/octave), balanced jack/XLR in/out, 20mm faders, 6/12dB switch, output meter, internal power supply. dimens more→ions: 19"/1U
Type: Boost;Equalizer
UK/EU Power supply included: Yes
Power Supply: 240V
Made in: China

The IOTA VX AVXP1 is a seven-channel Class AB power amplifier ably suited for high power home cinema and capable of delivering a 110W RMS output (8Ω all channels driven). A joy to audio enthusiast more→s this amp is rated at ≤0.06 THD+N (A-weighted) with ≥105dB and ≥110dB SNR (balanced and unbalanced respectively) introducing minimal divergence from the input signal of your processor whilst still delivering ample power thanks to its high output toroidal transformer.The AVXP1 can be effortlessly integrated into your separates HiFi system and works especially well as companion to IOTA VX processors with ports for both 12v trigger and front panel dimmer synchronisation …

The Behringer SU9920 Sonic Ultramizer is a signal processor that adds liveliness and vitality to your audio signals. Live or in the studio; wherever you use it youll boost your recordings and live sho more→ws to the max. Using its dynamic filter and 3-band phase delay the SU9920 is a premium product to get you that premium sound.

A passive studio re-amper that allows you to take a prerecorded track and send it back to a guitar or bass amplifier and re-record it. It features a 100% passive design with John's original custom wou more→nd 'Made in the USA' transformer and circuit. The latest Radial version features separate XLR and 1/4 " TRS input connectors, variable output level plus a three-position filter that lets you tame excessive highs, warm up the lows or simply bypass if you want to revert to the original circuit. An on-board mute function has also been added to allow you to shut off the signal going to the amps when making adjustments or moving mics around the studio. The dimensions of the box are 157 x 107 x 76 mm …

Excellent signal/noise ratio, lowest harmonic distortions and wide gain range make the QuadMic II a first choice for superior studio recordings. QuadMic II is battery powerable and thus excellent for more→remote applications. Each of the 4 channels features balanced microphone and line inputs with Neutrik XLR/TRS combo jacks, switchable 48 V phantom power, phase reversal and a low cut filter. All channels are also equipped with LEDs for signal presence, clip state, and activated phantom power. The input amplification can be set from 6 to 60 dB. The balanced line level output signals are provided on the rear of the unit as four 6.3 mm (1/4") TRS jacks. A maximum balanced and unbalanced output level …

The TritonAudio FetHead Filter Microphone Preamp with High-Pass Filter is the perfect pairing with ribbon and low-output dynamic microphones. Although it may be small it is mighty. When connected to y more→our microphone it delivers a clean boost of up to 27dB. This means you no longer need to crank your preamp to achieve the perfect level of gain. Theyll be no more noise or hiss just great sounding recordings! The FetHead features a integrated high pass filter at 220Hz. This is perfect for minimising proximity effect which can often occur with figure-eight polar patterns or when a microphone is placed closed to a source. Thanks to the gentle 6dB slope the filter will be subtle allowing the Fethead …

IWA In-Wall Amplifiers with BluetoothStereo amplifier units for background music and public address in a minimalist housing for installation into cavity walls and ceilings. Class-D amplifier design op more→erates cleanly and efficiently with minimal heat dissipation, combined with an internal digital switch-mode power section, which enables easy connection directly from the local mains supply. Bluetooth compatibility enables wireless streaming of audio files from a smart phone or other enabled device in addition to 3.5mm Aux input and an optical digital audio input, ideal for integrating into A-V systems. For discreet and trouble-free installation without any need for table-top or cabinet installation,…

The Eventide MixingLink Mic Preamp is a preamp pedal that offers flexible connectivity. Delivering phantom power and up to 65 dB of clean gain the MixingLink will work comfortably with everything from more→gain-hungry dynamic microphones to rich condensers and vintage ribbon mics. This preamp pedals built-in effects loop provides a lot of additional versatility letting you blend your dry signal and balance it against a processed signal perfect for splitting guitar signals before hitting the amp as well as creating unique processing chains. The MixingLink also provides an aux send and stereo aux input making this preamp a completely flexible all-in-one audio routing tool for studios and live music …