Amplifiers

The Topping PA7 Plus Class D Power Amplifier is a step up from the PA7 allowing for a more premium audio output. Equipped with two channels this amplifier delivers up to 165W of power to an eight-ohm load; primed and ready to boost most stereo setups. At the heart of the PA7 Plus is the Class D circuit design chosen by Topping for its efficiency and superior performance at this scale. This fully balanced structure reduces noise during transmission and achieves THD+N levels below 0.0003 per cent. The result is a clean and powerful audio output that will elevate your favourite songs. With a dynamic range of 124dB and a frequency response of 20Hz-40kHz the PA7 Plus is suitable for a wide range …

48 V phantom power supply for electret microphones and microphone cartridges. Conectors: XLR input (bal.)/XLR output (bal.), Input voltage: via encl. plug-in power supply, Output voltage: +48 V, Admiss. ambient temp.: 0-40 °C, Dimensions: 126 x 75 x 45 mm, Weight: 535 g Made in: China

DI Box / Desktop / Number of Channels 2

Fully balanced structure, Pure sound quality ▶️ The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 II/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC ▶️ The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4Ω load, THD+N

DSD support up to DSD512 native hard resolution, support Native DSD driver. Keep improving,not only good sound quality. Professional shape design with anodized CNC aluminum housing. AKM New AK4493S: Using a piece of AKM's new AK4493S, and carefully adjusted to achieve an unprecedented 0.00013%! High performance power filtering system: Built-in high performance power filtering system for optimal performance using only USB port power! The design purpose is: to occupy minimal space on the desktop, it has three placement modes as shown below, in these three placement modes, because it has a built-in digital acceleration sensor, so it will automatically switch the direction of the display.

Ultra-high Performance NFCA modules. A50 Ill uses the same NFCA(Nested Feedback Composite Amplifier) module from A50s. Voltage Current hybrid feedback architecture along with UHGF(UltraHigh Gain Feedback) technology provides excellent DC and AC performance. High-output current drive capability allows the amp to drive low-impedance headphones with ease. Full aluminum case. A50 Ill has a unique integrated design. lt has gone through dozens of processes of planning, design and precision machining from solid aluminum bricks. CNC machining provides excellent electromagnetic shielding while giving the A50 Ill a smooth appearance and superior strength. lt is not only the masterpiece of

Nice appearance,also greatly improved the heat dissipation capacity With chassis temperature display, better control sound quality. Powerful driving force, proper magnification and precise volume control make A1 can match most of the desktop small bookshelf boxes and most of the earphones and earplugs on the market, and adjust (for specific gameplay, please scan the code and refer to the official account arti cle) to Satisfactory timbre.

Hybrid Class-H Power AmplifiersLightweight power amplifiers in a 19" rack-mountable housing for generating high sound pressure levels in medium to large sound reinforcement systems. H-series amplifiers employ a new hybrid class-H architecture, which combines the streamlined efficiency of a digitally controlled power section design with the power delivery and stability of a professional class-H output stage. Comprehensive internal protection monitors any thermal or overload conditions, automatically mutes at power on/off and provides active inrush limiting. A digital display continually shows the supply voltage, internal temperature and output level. A fully balanced signal path has 3 switchable …

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 75 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

Trade in your Naim NAIT XS 3 High End Integrated Amplifier with AV.com. This amplifier praised for its big bold and dynamic sound excellent imaging and detail can be your ticket to exploring new audio equipment. You might want to trade this in to experience other integrated amplifiers that offer different sound signatures or feature sets. For example you could explore other brands renowned for their unique audio characteristics or delve into the world of valve amplifiers for a change of pace. Trading in with AV.com is all about discovering and experiencing the vast world of high-end audio.

The AL200 is capable of direct sampling of PCM digital audio up to 32bit/ 768kHz without the need to downsample. It also supports native DSD playback up to DSD 256 without conversion. On the front panel, a 6.35mm TRS headphone jack is provided, capable of delivering significant power output. The volume control for headphones and passive speakers are separate, adjusting one will not affect the other. For the first connection of AL200 via Bluetooth, you need to pair it with your smart device. Subsequent connections will be automatically established within a few seconds after switching to Bluetooth input or turning on the device. When switching from Bluetooth input to other inputs, playback will …

This WIFI digital amplifier simplifies room sound with two speakers, eliminating the need for complex cabling and music source. It is small and compact. Uses a WIFI network connection. It allows you to play music from local, network and Internet repositories and services, Internet radio, including podcasts. Includes USB / MP3 player with Bluetooth connection. It has a stereo line input (2x RCA), optical (Toslink) input, output to an active subwoofer (RCA) and headphone output (3.5 mm jack). A remote control is supplied to control the device. We also recommend using the AUDIOCAST or SMART SONIX application to control and set up Internet radios. With these applications, you can control the switching …

Preamplifier / Stereo / 4x LINE In (Cinch/RCA, Stereo)