Amplifiers

Infineon's new technology class D power amplifier MA12070 chip to this small machine, large number of audio grade components are used to enhance the sound experience. Built-in Bluetooth 5.0 receiver, Great sound quality, longer transmission distance. Beautiful and simple. Built-in 2 sets of subwoofer signal pre-output, for easy connection with active subwoofer system 2.1 or 2.2. Built-in low-noise, big-power audio dedicated switching power supply to ensure continuous powering. A good power supply will directly affect the Sound quality of playback. Perfect protection circuit for overheating, overcurrent, etc. High quality power adapter specially designed for audio. Three input methods - USB/ …

Digital-to-Analogue Converter / Stereo / Output power per channel 100 Watt / Bluetooth

Superior Audio Quality : The fully balanced class D amplifier design with dual MA12070 chips and low THD+N levels provide pristine, distortion-free audio even at high volumes. High Power Output : With the ability to output 80W x 2 at 4ohm load and 65W x 2 at 1% THD+N, the PA3s has enough power to drive any bookshelf or floor-standing speakers. Versatile Inputs : The TRS balanced and RCA single-ended inputs eliminate ground loop problems, making it easy to connect to a range of audio sources. The front panel button allows easy switching between inputs. Comfortable Listening Experience : With the lowest THD+N in the range of 10-20W output, the PA3s offers an optimal listening

High-end audio - TOPPING DX3 Pro+ is a high-performance DAC with USB, Optical, Coaxial, Bluetooth input, Line Out and headphone amplifier output. About Topping DX3 Pro+ - Equipped with the latest QCC5125 chip, it supports LDAC / AAC / SBC / APTX / APTX LL / APTX HD protocols. It uses the ES9038Q2M decoder, supports high-resolution music transmission, and can be played back with clear sound. Bluetooth 5.0 - Connect the Bluetooth of the phone, tablet or notebook to DX3Pro+, and connect the power amplifier, active speakers or headphones to the DX3Pro+'s output, then DX3Pro+ becomes your Bluetooth Headphone amp 1 Bluetooth DAC. You can easily enjoy the high quality music and convenience

【The D-class amplifier chip】 adopts the MA5332MS stereo D-class amplifier chip, and the multi chip module provides the same or even higher output power as the single chip replacement, without the need for a heat sink, reducing the space occupied by 50%. Equipped with overcurrent, over temperature and under voltage protection. We have used the electronic volume control chip NJW1194 from JRC Corporation in Japan for precise volume control and ultra-low distortion. 【MQA-CD full decoding】will fully unfold MQA music files to provide high-quality sound sources. At this playback level, you will fully hear the content created by the artist in the studio. Only the CD file size allows for high-quality music at…

S460-WIFI Multi Streaming AmplifierClass-D dual stereo amplifier delivering up to 4 x 60W output with Bluetooth and internet streaming capability. Two internal amplifiers have individual volume control, allowing different music levels in 2 separate areas. Controlled from an Android or iOS smart phone, the S460-WIFI is compatible with freely available apps to stream music and podcasts directly from a WiFi or wired RJ45 network connection. Embedded internet radio offers high quality digital audio from almost any online radio station or podcast available worldwide. Subscription services can store online playlists which can be cast directly from the internet without requiring the smart phone to …

Features: Passive Preamplifier Active Speaker Volume Controller: precise volume adjustment, no loss, compatible with all types of playback devices and external active speakers. Professional 128mm Fader Switch for Volume Adjustment: the accuracy error of fader switch is small, the left and right channels are synchronized better, and there is no loss of sound details. Compact & Exquisite Size: the volume adjuster with intuitive scale designed makes the desktop volume adjustment more convenient and precise. Plug and Play, Simple Installation: able to be used once inserted, convenient to install, signal source non consumption adjustment, no loss of input and output, perfect for you to enjoy different …

The Monitor Audio IA125-4 is a compact and versatile four-channel custom installation amplifier. It can be configured to deliver four channels at 125W and two channels at 250W. In power-sharing mode it can even support Monitor Audios THX Ultra-certified Cinergy 100 speakers for a large system. This is a great amplifier for two-zone stereo applications as well as height channels within your home theatre system. This is all packed into a rugged 1U half-size space-saving design - perfect for any setup you have.

TOPPING MX3s DAC/Headphone Amp/Power Amp ▶️ The TOPPING MX3s is a comprehensive audio solution that combines a DAC, headphone amplifier, and power amplifier. With this versatile system, you can experience your favorite music and movies through a variety of devices, including in-ear monitors, full-sized headphones, and even a 2.1 speaker system. Merus Class D amplifier ▶️ It can output 62W x2 at 10% distortion and 50W x2 at 1% distortion under 4-ohm load. 40W x2 at 10% distortion and 30W x2 at 1% distortion under 8-ohm load. Built-in AK4437 DAC ▶️ The TOPPING MX3s features an AK4437 DAC and is equipped with a Qualcomm Bluetooth chip, the QCC3040, providing exceptional USB,

Wall stereo amplifier with a multitude of playback options: Bluetooth®/USB, FM tuner with 50 presets and two auxiliary inputs, expanding your possibilities and allowing you to enjoy music played from any other device with line-level output. Enjoy high quality, powerful sound without distortion. 2.15'' LCD display of mode and playback information. It allows you to set a maximum volume, establishing a limit to ensure that the desired volume is not exceeded, in addition, it has a shut-off timer and bass and treble equalisation. Compatible with standard universal square and round box, easy integration into any space. Control via touch buttons or via the included remote control. For small sound …

Signal Processor / 19 Inch Size / Processor Type Expander / Number of Channels 2 / Rack Height 1 RU

Dynamic Processor / 19 Inch Size / Processor Type Compressor / Number of Channels 1 / Rack Height 2 RU

・Product Description・ This is the standard model "SA-36Apro (2015)" from S.M.S.L, a leading manufacturer of Chinese amplifiers. This is a renewed version of the 2014 model, which was released as a successor to the "SA-36A," which had been the company's flagship product for many years. First of all, "SA-36A" and "SA-36Apro" are completely different products! "SA-36A" and "SA-36Apro" are not products on the same line. Therefore, if you are considering purchasing "SA-36Apro" as a replacement for "SA-36A," please be careful not to make a mistake. We would like you to understand that it is positioned as a new product. Now, this product has been changed to ST's "TDA7492PE" digital

Built-in DAC ,Supporting common digital signal inputs: The MX3s features an AKM DAC and is equipped with a Qualcomm Bluetooth chip, the QCC3040, providing exceptional USB, optical, coaxial, and Bluetooth input capabilities. This allows for easy connection of various audio sources, such as computers, set-top boxes, DVD players, smartphones and tablets, making it incredibly versatile. Nice Bluetooth performance: The MX3s supports Bluetooth protocols such as AAC, SBC, aptX, aptX-HD, and aptX Adaptive, achieving transmission distortion below 0.001%. It brings you an exceptional audio experience. Subwoofer Output: The MX3s has a built-in subwoofer output that can be wired for a full 2.1-channel

Aluminum alloy CNC machining process： Using anodizing technology, fine workmanship, Good touch! Qualcomm Bluetooth 5.0 receiver, support APT-X：Better sound quality, longer transmission distance! APT-X Lossless music transfer： Low latency, good fault tolerance, high sound quality! Powerful bass pre- amp output： The output is adjustable from -30~+10dB, used to connect with a far- subwoofer speaker to form a 2.1 audio system! 2 separate high-power digital power amplifier chips 230W×2（4Ω） ：Use two separate digital power amplifier chips, output 230W per channel at 4 ohms, easy to drive most speakers! Electronic volume control chip NJW1195： Japan's NJRC company electronic

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to