Engine Oils Millers

Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior protection for components including pistons, rings, timing chain, bearings and valve lifters Specifically engineered to enhance engine cleanliness, delivering improved fuel economy, reduced emissions and extended service drain capability Complements and utilises latest mid SAPS technology, protecting after treatment systems such as particulate filters, Selective Catalytic Reduction (SCR) and AdBlue delivering ultimate soot control and environmental …

Millers Oils EE Performance 5W40 is a fully synthetic engine oil featuring 'Nanodrive' technology which hugely reduces engine friction by up to 24% and providing a reduction in wear of up to 25% when compared to other fully synthetic oils. Designed for vehicles which require a A3/B4 or A3/B3 5W40 viscosity predominantly for European and Asian high performance vehicles including AMG, Aston Martin, BMW, Ferrari, GM (Opel, Vauxhall) Lamborghini, Maserati, Mercedes Benz, Nissan Sport, Porsche and Renault Sport. For use in petrol, diesel and hybrid engines.Improves fuel economy by lowering friction within the engineExcellent wear protection increases component lifeReduces emissionsReduction in

Millers Oils CFS (Competition Fully Synthetic) Nanodrive is an engine oil developed for Motorsport use. The use of Nanodrive technology hugely reduces friction, compared with traditional synthetic oils, resulting in improved engine power, reduced engine wear and improved engine efficiency. The 5W40 viscosity is suitable for small capacity high revving engines or larger engines used for short periods Eg sprints, hillclimbs. Also recommended for fast road or trackday use in engines where a 5W30 oil is normally specified.Load carrying capacity many times that of mineral oilHigh film strength for ultimate protection.Outstanding cold flow properties for reduced wear at start up.Excellent thermal …

Millers Oils Stop Leak, Petrol or Diesel Engines, Gearboxes and Diffs

XF Premium C5 VW is a fully synthetic, mid SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require a 0w20 viscosity, particularly VAG group including Bentley, Seat, Skoda and Porsche.XF premium C5 VW 0w20 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in modern vehicles including

Millers Oils EE Performance C3 5W30 is a fully synthetic engine oil featuring 'Nanodrive' technology which hugely reduces engine friction by up to 24% and providing a reduction in wear of up to 25% when compared to other fully synthetic oils. Designed for vehicles which require a C3 5W30 viscosity. Designed for Volkswagen Audi Group (VAG) including Bentley, Lamborghini, Seat, Skoda and Porsche. For use in petrol, diesel and hybrid engines.Improves fuel economy by lowering friction within the engineExcellent wear protection increases component lifeReduces emissionsReduction in friction of up to 24% providing a reduction in wear of up to 25%The Millers Oils EE Performance ECO 5W30 is a track

Fully synthetic, mid SAPS, for use in petrol, diesel and hybrid engines.

CFS NT+ is a flagship synthetic engine oil from Millers Oils which has been developed specifically to satisfy for the demands of engines used in Motorsport. It features the highest level of Nanodrive technology found in any Millers Oils products resulting in a huge reduction in friction to enable maximum engine power output and efficiency with minimal wear. The 5W40 viscosity is suited to fast road/street modified engines, race, rally, sprints and hill climbs. Ideal for engines with hydraulic tappets such as Ford Zetec.Provides a significant reduction in friction compared to other synthetic engine oilsAllows for maximum engine power outputHigh film strength for ultimate engine protectionDeveloped …

Millers Oils Trident 5w40 is a full synthetic engine oil. Fully synthetic engine oils offer better viscosity under all conditions especially extreme temperatures (e.g. Cold starts). Fully synthetic oils reduce sludgeing, oil burnoff and the potential for oil passageway clogging all of which can damage your engine. Millers Oils Trident 5W40 is recommended for use in current and late model petrol and diesel cars where this type of advanced engine oil is called for by the manufacturer, especially modern high performance vehicles. It is also ideal for turbocharged engines.Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its componentsProvides easy

High performance competition semi-synthetic engine oil. Combination of the highest quality and latest performance additives in synthetic and mineral base stocks. CSS 10w40 is a high performance semi synthetic road and race oil for car and motorcycle engines alike.

Millers CB40 is a high quality castor based oil suitable for all 4 stroke car or motorcycle engines which require a vegetable based oil, including those which run on methanol or alcohol based fuels.High lubricant film strengthReduces friction for increased component life and improved powerExtra load carrying additives provide excellent wear protectionIdeal for speedway bike enginesTechnical Data Sheet

XF Premium 0w40 is a fully synthetic, full SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require a 0w40 viscosity, predominantly Mercedes Benz (including AMG), Porsche and Renault.XF premium 0w40 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in modern vehicles including hybridsMillers Oils

Helps to maintain coolant flow in radiators. Helps reduce coolant temperature by up to 15°C. . Provides powerful corrosion protection for all metals found in engines e.g. aluminium, cast iron, etc. Reduces engine damage from internal coolant leaks. Mixes with all good quality antifreezes.

Fully synthetic, mid SAPS, for use in petrol, diesel and hybrid engines A premium OEM approved engine oil formulated using the latest technology For applications requiring a C5/C6 0w20 viscosity Covers a wide range of European and Asian manufacturers Replaces Millers Oils XF Premium C5 0w-20