Boat Motors Minn Kota

Allows trolling motor to be quickly removed from and reattached to boat deck Sidescrew design attaches trolling motor to top bracket and slides into deck-mounted bottom bracket, secured with tightening screw Solid, anodized aluminum construction Includes mounting hardware Brackets can be secured with padlock (not included) for additional security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 Designed for use in freshwater

Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Locking handle can be secured with padlock (not included) for additional security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 (not for use with 72" shaft length motors)

Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Compatible with Ultrex, Fortrex, Maxxum, and Edge. NOTE: Not for use with 72" shaft length motors.

Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with 1/4", short shank padlock (not included) for additional security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the MKA-53 model. Designed for use in freshwater

Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Compatible with Riptide Ulterra, Riptide Terrova, Riptide ST, Riptide PowerDrive, and Riptide SP.NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer.Designed for use in saltwater

Mounts between your jack plate and transom or between the outboard and transom, for use in port or starboard Raptor mounting applications. Allows installation of jack plate brackets without a jack plate Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware

Provides 3” of additional setback to all mounting applications where specific clearances are required for Raptor Shallow Water Anchors Lightweight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware 5-year warranty

Adds 6 inches of vertical rise Lightweight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Slotted mounting holes for position adjustment 5-year warranty

Adds 4 inches of vertical rise Lightweight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Slotted mounting holes for position adjustment 5-year warranty

Compatible with 10 foot Minn Kota Raptor models only. UV resistant vinyl All-weather, corrosion-resistant zipper Not intended for use while on the water 1 Year Limited Manufacturer Warranty

Add-on performance kit for Talon Pontoon Edge Mount Bracket Provides increased strength and rigidity Contains additional under deck support bracket and two spanner plates For larger or heavier pontoon boats

QUEST Series: These 24/36V dual-voltage brushless motors have been completely re-imagined from the ground up with updates to mounts, propellers, lift assist systems, drive motors and software – taking the world’s greatest trolling motors and redesigning them to outperform everything else on the water for years to come. Advanced GPS Trolling System: The One-Boat Network gives you unprecedented control over your boat by linking your trolling motor to your Humminbird fish finder. Control your trolling motor from the included remote or a connected Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and…

Minn Kota Riptide ST Trolling Motor

Auto Stow & Deploy: Stow or deploy Ultra just by pushing a button on your I-Pilot or I-Pilot Link remote, foot pedal or Hummingbird fish finder Power Trim: Trim Ulterra up or down at the push of a button — on either the foot pedal, the I-Pilot or I-Pilot Link remote or a Hummingbird fish finder. Adjust to changing fishing conditions without reaching down to your trolling motor I-Pilot Link Integrated GPS Trolling System: Gives you unprecedented control over your boat by linking your trolling motor to your Hummingbird fish finder. Control your trolling motor from Link's color touch-screen remote or the Hummingbird Autopilot: Automatically navigate your boat in any direction you choose, just po…

The Minn Kota Terrova features an easy-to-deploy system of fall away ramps that effortlessly slide the trolling motor into the water, plus a spring-loaded Lift-Assist design for easy stowing. A low-profile electric foot pedal offers two steering options (heel/toe pedal and left/right steering buttons) and includes Spot-Lock activation, rotary speed control dial, momentary/constant on toggle, and Autopilot on/off toggle. Using GPS to lock onto fishing spots with Spot-Lock, record paths, and command speed, the I-Pilot Link system allows you to control your motor from the touchscreen remote or from a virtual remote on your Hummingbird fish finder (sold separately). Offering optimal sonar performance …

Stow/Deploy Lever: Press this lever on the mount and fall-away ramps will effortlessly slide your trolling motor into the water. And when you're ready to move, Auto Park helps the motor stow effortlessly by orienting the lower unit to the perfect stow position automatically. Advanced GPS Trolling System: The most-trusted navigation system in fishing. Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Lock, record paths, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from the easy-to-read LCD screen of Terrova's wireless remote. Part of the One-Boat Network: Minn …

36" Shaft, 12v, 40 lbs Thrust Endura is trusted worldwide as the most durable, reliable, hard-working transom-mount motor on the water. And Endura Max takes that legacy to a new level, adding Digital Maximizer to help the motor run up to five times longer on a single charge. Lever Lock Bracket: This solid 10-position bracket features a quick-release lever lock and reinforced composite material that resists flexing, warping, and UV damage Digital Maximizer: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of …