Amplifiers

Superior Audio Quality : The fully balanced class D amplifier design with dual MA12070 chips and low THD+N levels provide pristine, distortion-free audio even at high volumes. High Power Output : With the ability to output 80W x 2 at 4ohm load and 65W x 2 at 1% THD+N, the PA3s has enough power to drive any bookshelf or floor-standing speakers. Versatile Inputs : The TRS balanced and RCA single-ended inputs eliminate ground loop problems, making it easy to connect to a range of audio sources. The front panel button allows easy switching between inputs. Comfortable Listening Experience : With the lowest THD+N in the range of 10-20W output, the PA3s offers an optimal listening

Signal Processor / 19 Inch Size / Number of Channels 2 / Rack Height 1 RU

The new NFCA amplifier circuit is specifically designed for portable amplifiers. The low idle power consumption allows for extended battery life. This is done while having 0.00007% THD+N and 135dB SNR. It's powerful and clean enough for power-hungry full-sized headphones and sensitive IEMs. The NX7 can output 180mW of high power under a load of 300 ohms, and with the help of 3 step gain setting, the small body can easily beat the full-sized headphones. It is worth mentioning that even when the output is 200mW, the load distortion is only 0.00008%. The low gain of NX7 is -13.8dB. When used with high-sensitivity in-ear headphones, there will be almost no trouble of potentiometer bias in the

The SMSL D400EX uses a flagship DAC chip, 1 AK4191+2 AK4499EX, with built-in MQA hard decoding. DSD supports to DSD512. Support MQA decoding and MQA-CD. Japan Audio Association (JAS) Hi Res certification. USB uses the new third-generation XMOS XU-316, a true 32-bit USB solution XMOS XU-316, and PCM supports up to 32-bit/768kHz. Qualcomm high-end Bluetooth chip supports LDAC (24bit/96kHz), APTX/HD, SBC, AAC. The eight channel parallel circuit design is adopted, and the distortion is as low as 0.00006% (- 124 dB), which is more stable. 11 high-end dual op amps and a large number of fever components are used. USB, optical fiber, coaxial, AES and I2S support DSD transmission, and coaxial and optical …

【The D-class amplifier chip】 adopts the MA5332MS stereo D-class amplifier chip, and the multi chip module provides the same or even higher output power as the single chip replacement, without the need for a heat sink, reducing the space occupied by 50%. Equipped with overcurrent, over temperature and under voltage protection. We have used the electronic volume control chip NJW1194 from JRC Corporation in Japan for precise volume control and ultra-low distortion. 【MQA-CD full decoding】will fully unfold MQA music files to provide high-quality sound sources. At this playback level, you will fully hear the content created by the artist in the studio. Only the CD file size allows for high-quality music at…

Trade in the Roksan Blak Integrated Amplifier with AV.com. This process allows for an audio equipment refresh and a chance to experience the newest sound technologies. The Roksan Blak while a stellar amplifier may be due for an upgrade to keep pace with evolving audio requirements. Consider the possibilities of transitioning to a modern DAC-equipped stereo receiver or another integrated amplifier. Trading in with AV.com is not just environmentally conscious but also a pathway towards elevating your sound experience.

The Topping PA3S Class D Power Amp is packed with high-quality features that will boost the sound power of your speakers. The PA3S will connect to 4-8ohm speakers and is equipped with two RCA and TRS inputs. Its compact design allows for flexible positioning and houses first-rate capacitors and relays. The Class D amplifier is equipped with two MA12070 chips that generate a power output of 80W x 2 and have a THD+N rating of 1%. Offering an LED-lit front panel you can view the input status of the amp and be notified of any faults. The amp is also home to over-heating protection that will enable long durability and it also has a black finish that will fit in with your homes character.

Dominance reloaded: The MK2 series of Reloop's Dominance amps combines intelligent electronics and qualitative manufacturing adding up to an amplifier solution for gastronomy, business and clubbing. A vast protective circuit package avoids unwanted overloading of any kind. With the three different capacity levels for 360, 720 and 960 watt every sound engineer should be able to find the right package. Made in: China Outputs: Amp Terminal Connectors;Speakon Controls: Gain Depth (mm): 88.0 Impedance (Ohm): 4.0 Frequency Range: 20 Hz - 20 kHz Inputs: RCA;XLR Package Contents: Manual Height (mm): 350.0 Power Supply: 230V Type: Power Amplifier Width (mm): 483.0 Power (Watt): 720.0 Weight: 10 kg Rackmountable: …

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 100 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

Features: 1. 5.1 Surround Sound, High-Power Amplifier, Bluetooth 5.0, Usb Flash Drive Card (Not Included), Dual Microphone Inputs 2. Wireless Bluetooth, Lossless Decoding, Dual Microphone Interface, Super Bass, Karaoke Reverb 3. 5.1 Surround Sound, Cinematic Immersive Experience 4. High-Power Amplifier, Dual Microphones For Karaoke, And Reverberation Adjustment 5. Lossless Decoding Mode, Listen To High-Definition Audio Description: 1. Amplifier type: HIFI 2. Output impedance: 4-16 3. USB: support 4. Microphone: Support 5. FM radio: supported 6. Remote control: supported 7. Bass adjustment: support 8. Amplifier channel: 5.1 9. Rated power: 200W+200W 10. Bluetooth: support 11. SD card: support …

Features: Particularly powerful with full 150W + 150W amplifier. 10 channels with XLR and Line mono inputs. 2-band EQ (HI & LOW) on each channel and 5-band graphic equalizer on the main. Built-in 16 kinds of LCD display digital effects. Built-in 48V phantom power for condenser microphone use. With USB & SD/ MMC Card input interface and LCD display. With speaker outputs(L & R) and main XLR outputs (L & R). Great for DJ, stage and karaoke to have a perfect sound effects. Specifications: Color: Dark blue Material: Metal Power adapter: US Item size: 46.5 * 31 * 13cm / 18.3 * 12.2 * 5.1in Item weight: 7.2kg / 15.9lb Package size: 51 * 37.5 * 18cm / 20.1 * 14.8 * 7.1in Package weight: 8.1kg / 17.…

ES9068AS DAC Chip--- E50 uses the latest high-performance DAC chip ES9068AS. Our excellence in design and engineering provides realistic and transparent sound quality. The sound quality is good enough for all kinds of applications--- With the help of careful design and adjustment, E50 provides a distortion as low as 0.00009% and a dynamic range of 126dB, providing you with perfect sound quality. This also makes E50 suitable for applications: high-fidelity PC-HIFI system, mobile phone/tablet OTG, CD player/turntable external DAC, digital broadcasting external DAC, TV DAC, and so on. Ultra-low jitter for USB inputs, jitter is no longer anxious--- Using CPLD to process the clock and greatly

Power Amplifier / Number of Channels 2

SY Electronics SY-1A-25W-BW audio amplifier 2.0 channels Performance/stage White

▶ Newest AK4493S - The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. ▶ Plug and Play - DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications) ▶ Discrete LNRD - The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise. ▶ Powerful output - DX1 can