Amplifiers

Power Amplifier / Number of Channels 2

A14 Dual Stereo Mixer-Amplifier 4 x 100WComprehensive 1U PA amplifier with 2 independent stereo zones and a global microphone input. Each zone has an independent audio player module which can select between USB / microSD mp3 player, FM tuner, Bluetooth receiver, 2 stereo line inputs (rear panel RCA) and another line input on the front panel (3.5mm). Playback can be controlled from the front panel or by the supplied I.R. remote control handsets. In addition, each player has an Aux 4 setting allowing it to connect to the other player module, meaning either one of these players can be used for both zones if needed. Mic inputs 1 and 2 are live to both output zones at all times. 2 pairs of speaker …

Q1000 power amplifier 2 x 500WStereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers.6.3mm jack or RCA inputsSPK, 6.3mm jack or 4mm post outputsFan cooled19" rack-mountable (2U)Fuse rating - T5A (240V) / T10A (110V)Power max. : 4 Ohms - 2 x 500WPower rms : 4 Ohms - 2 x 250WPower rms : 8 Ohms - 2 x 160WDimensions - 482 x 380 x 88mm (2U)Weight - 9kg

Headphone Amp / 5.1 / Max Sample Rate 384 kHz / Bitrate 32 bit / Bluetooth

Signal Processor / 19 Inch Size / Number of Channels 2 / Rack Height 1 RU

Signal Processor / 19 Inch Size / Processor Type Graphic EQ / Number of Channels 2 / Rack Height 3 RU

The new NFCA amplifier circuit is specifically designed for portable amplifiers. The low idle power consumption allows for extended battery life. This is done while having 0.00007% THD+N and 135dB SNR. It's powerful and clean enough for power-hungry full-sized headphones and sensitive IEMs. The NX7 can output 180mW of high power under a load of 300 ohms, and with the help of 3 step gain setting, the small body can easily beat the full-sized headphones. It is worth mentioning that even when the output is 200mW, the load distortion is only 0.00008%. The low gain of NX7 is -13.8dB. When used with high-sensitivity in-ear headphones, there will be almost no trouble of potentiometer bias in the

The new NFCA amplifier circuit is specifically designed for portable amplifiers. The low idle power consumption allows for extended battery life. This is done while having 0.00007% THD+N and 135dB SNR. It's powerful and clean enough for power-hungry full-sized headphones and sensitive IEMs. The NX7 can output 180mW of high power under a load of 300 ohms, and with the help of 3 step gain setting, the small body can easily beat the full-sized headphones. It is worth mentioning that even when the output is 200mW, the load distortion is only 0.00008%. The low gain of NX7 is -13.8dB. When used with high-sensitivity in-ear headphones, there will be almost no trouble of potentiometer bias in the

Clean up the recording. When the analog sound is converted to a digital signal, time blurring will occur, blurring transient signals over time. As a result, our ears cannot tell where asingle sound comes from, the comparison between recorded music and “live performances” is unremarkable! MQA can eliminate this distortion and createa true 3D sound field, which is different from any sound you have ever heard. Encapsulate the sound. Once the blur in the recording is removed, MQA will use what we call a "musical origamiMprocess, cleverly makes this large resolution file easy to manage andcan compatible with any service or playback device. CD Player + MQA-Enabled DAC Your CD player's

Four-chip decoding for superior sound：The DL100 is capable of directly sampling 32bit/768kHz PCM digital audio without down sampling. lt also supports DSD256 native DSD playback without conversion.Optical and coaxialinputs support DOP 64. Newly upgraded headphone amplification circuitry：Adopts self-developed independent amplification circuit for excellent performance. Performance compared to the previous generation of CS43131 products, the output power increase of about 16 times at 300Ω. USB Dual Mode 2.0/1.1: There are 2 different USB modes that can be switched within the menu, using USB2.0, driver installation is required to support high sample rate audio files up to 768kHz/32bit. Using USB1.…

Power Amplifier / Number of Channels 2

Two-channel amplifier with a power of 2 x 50 W with practical dimensions of 19 x 28 cm. Thoughtful simple solution, ideal for schools, conference rooms, bars and restaurants. Thanks to its sound qualities, it will also appeal to a number of beginning Hi-Fi fans. There are two multifunctional controls on the front panel and a backlit display is located under the black acrylic. In the active state, the display subtly illuminates the black area, in the off state, the forehead is pure black, or with a light point indicating the standby mode. The aluminum bottom of the casing is also a heat sink that dissipates heat from electrical circuits. The internal power supply is provided by a powerful toroidal …