Amplifiers

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases (or decreases) the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 75 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

Features: 1.Compatible with a variety of Quest2 Straps:BOBOVR A2 Audio Solutions adopts a side-sliding installation design, which can be directly installed on most Quest2 elite and halo Straps on the market (including but not limited to BOBOVR M1/M2 series, official Straps and mainstream third-party Straps ), which can greatly improve the sound quality of VR equipment and make your VR immersive experience better. 2.Built-in power amplifier module:Equipped with an additional DSP power amplifier chip and an independent lithium battery power supply system to improve the sound quality of the earphones. At the same time, A2 uses high-power 32/30mW2PCS TPU double-composite titanium film, NdFeB strong …

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

Power Amplifier / Number of Channels 2

Flagship achievement flagship :D90LE uses ESS SABRE ES9038PRO, with 32bit Hyperstream architecture, achieves ultra-high performance in the audio field. Each channel of the D90LE will be arranged in parallel by 4 conventional balanced channels. This makes theperformance of D90LE even better. Bluetooth 5.0 LDAC transmission: D90LE has the certification of Hi-Res Audio Wireless and LDAC. It uses CSR8675 chipset to support LDACIAAC/SBC/APTX/APTX LL/APTX HD protocol.To get even better sound quality from Bluetooth, we abandon the built-in DAC of CSR8675 and connect it'sdigital signal to ES9038PRO to decode. We use CPLD to process the clock and greatly optimize the digital signal, so that

Slimline PA power mono amplifier from Monacor. This professional 100V PA amplifier is designed for small-medium scale PA systems where reliable amplification is required over a long speaker line; such as schools, colleges, supermarkets, factories, warehouses, etc. Designed to be installed into a 19" rack (2U) cabinet or case, but can also be free-standing on a desktop counter or desk, etc. UK/EU Power supply included: No Rackmountable: Yes Battery Operation: No Power (Watt): 120.0 Weight: 3,5 kg Power Supply: 240V Made in: China

The Topping PA5 MKII Plus is a first-rate compact power amplifier building on the superb quality of the PA5 MKII but with enhanced power capacity. It provides up to 140W at four ohms and 85W at eight ohms per channel. Built with a fully balanced structure and an efficient Class D amplifier circuit the PA5 MKII Plus eliminates unwanted hum and noise to magnify any stereo speakers. With distortion levels measured as low as 0.0003 per cent (eight ohms at five watts) a frequency response of 20Hz - 40kHz and a 124dB dynamic range the PA5 MKII Plus effortlessly produces crystal-clear audio for an excellent listening experience. This power amplifier boasts RCA and TRS inputs enabling easy connectivity …

THX AAA Technology ESS SABRE ADC ES9820Q and ES9038Q2M DAC Dirac Virtuo spatial audio solution MQA Compatible Balanced Inputs

Switch: Control a pair of speakers from either a stereo amplifier or a surround amplifier - easily convertible without cables. Multifunctional: The switch also offers the possibility to switch to 2 different pairs of speakers with 2 amplifiers. Safe: The high-quality rotary switch with zero position protects the connected devices - deep high-quality banana sockets provide the cables with a secure hold. Sound: Due to the increased cable cross section, the AMP-S Pro offers optimal signal transmission without distorting the sound of the system. Quality: The AMP-S Pro has a sturdy metal housing and a 4mm thick aluminium front plate in brushed finish.

Amplifiers for installations / Total Connected Load 50 W

Integrated Amplifier / Stereo / Output power per channel 35 Watt / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

Parameters: The latest version, supports LDAC, HD, AAC, at the same time, supports Android and , LDAC supports 24BIT94K transmission and can be compatible at the same time! Truly lossless transmission, the same level of sound quality as CD! LDAC can reach up to 990kbps. -X HD maxes out at 576kbps. 5.0 Bluetooth CSR8675+PCM5102A decoding, support LDAC, HD. True 5.0 module. The PCM5102 decodes independently and adopts the I2S protocol transmission, which is much the Bluetooth playback board without decoding output. The decoding further improves the sound quality and resolution. Not comparable to general toy-level bluetooth audio output. The signal-to-noise ratio is 112db, and the 2.1V RMS audio …

Features: It is a mini 2.1 channels power amplifier with LCD display, backlight design. Supports 40W + 40W left and right channel output and a 68W mega bass channel output. Treble, bass, subwoofer, and master volume adjustment buttons for easy operation. Can read U disk and memory card, plug and play, supports BT wireless connection. With remote controller, full-featured remote control is supported. Specifications: Rated Frequency: 20-20KHz Left and Right Channel Power: 40W+40W Subwoofer Channel Power: 68W Resolution: 47K Distortion Rate: 0.4% Signal-to-noise Ratio: 80dB Impedance: 4-8 ohms Material: Aluminum alloy Color: Black Product Size: 12.5*17.6*4.5cm Package Size: 27*21*6.5cm Gross Weight: …

Digital-to-Analogue Converter / USB Audio Streaming Network Function / Bluetooth

Microphone Pre-Amp / 19 Inch Size