Amplifiers

300 Watts per channel at 4 Ohms
LAPC (Load Adaptive Phase Calibration)
JENO (Jitter Elimination and Noise-Shaping Optimisation) Engine
Advanced Speed Silent Power Supply
Intelligent Phono EQ

Active 2-channel DI Box. The Palmer PAN04A 2-channel DI box allows you to feed the unbalanced hi-Z signals of electric instruments to the microphone inputs of a mixer. It delivers a transformer balanced lo-Z signal at the outputs and helps eliminate hum and interference caused by ground loops. The active circuitry preserves frequency response and provides increased dynamics. The unit also features a 1/4" direct out and switchable -30 dB pad on each channel. An additional balanced XLR output merges both input signals to mono, e.g. for summing the L and R channels of a stereo instrument. With its tough construction, the PAN04A is equally suitable for stage and studio use. It operates on any standard …

PORTABLE YET POWERFUL: DAC3 is a pocket-sized digital-to-analog converter (DAC) and headphone amplifier that’s the perfect upgrade for your on-the-go listening. Connect DAC3 directly to your phone, tablet or computer via USB-C and drive high resolution audio to your headphones (or speakers) and reveal stunning detail and music clarity you’ll notice immediately.
PREMIUM PERFORMANCE: DAC3 uses a high-performance headphone amplifier, which easily drives headphones with impedances of 12 ohms or higher. The ES9281A PRO Ultra DAC delivers 32-bit precision, high dynamic range and ultra low distortion with the capacity to support even the most demanding headphones.
HIGH-RESOLUTION AUDIO: With broa…

From the functional "dogbone" handle to the chrome control plate and mini "chicken head" knobs, the Fender MD20 Mini Deluxe replicates the classic look of the full-size Deluxe amp for the traveling player. Plug in and tap into pure Fender tone at a fraction of the size, wherever your next destination may be.
Made in: China
Power Supply: Adapter
Headphone Output: Yes
Power (Watt): 1.0
Battery Operation: Yes
USB: No
DI Output: No
Power: 1 W

Power module for AT892 MicroSet. Also suitable for use with any Audio-Technica Wireless Essentials microphone terminated with 4-pin locking connector. The AT8539 allows you to convert your wireless microphone into a wired model. Comes equipped with a snap-on belt clip.
Package Contents: Clip;Manual
Impedance: 250 Ohm
Switch: Yes
Type-A Connector: XLR Male
Power Supply: 48V Phantom
Made in: Japan
Type-B Connector: 4 Pin HRS connector

PERFORMANCE - Greatly improves headphone sound from any device with a USB output.
VERSATILITY - Connects easily to USB-C ports. (Adapter for USB-A ports also included)
FEATURES - ES9219 Sabre DAC chip with Quad DAC+ technology, 32-bitHyperStream III DAC architecture and Time Domain Jitter Eliminator. Also supports Supports hi-res audio up to 32-bit/384kHz PCM, DSD256 and MQA.
HIGH QUALITY - Gold-plated 3.5mm headphone socket, silver-plated copper conductors, twisted for high signal purity.
CONNECTIONS - USB-C Input to 3.5mm Headphone Jack.
INCLUDES, 1 x GO link, 1 x Quick Start Guide, 1 x USB-A to USB-C adapter, 1 x USB-C Charging Adapter 1 x Instruction Card…

RMC120 mixer-amp 120W with CD/USB/SD/FM100V line mixer-amplifier with integral sound source. 5 input channels include a balanced XLR microphone input with switchable phantom power and Vox override, 2 mic/line jack inputs and 2 RCA line inputs. A built-in CD player provides audio playback alongside a USB/SD media player with an integral FM radio tuner. Bass & Treble EQ and Master volume control the overall output, which can power either low impedance or 100V line speakers. A comprehensive solution for commercial sound installations.5 input channelsUSB/SD/FM audio playerSlot load player for standard audio CDsExternal D.C. power option8 Ohms or 100V line speaker output2U 19" rack mountableSupplied …

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Battery Operation: Yes
Type: DI Box
Power Supply: 48V Phantom
UK/EU Power supply included: No
Made in: Germany

The Art Splitcom Pro is a durable microphone splitter/combiner that diversifies your signal flow options. If you need to get one microphone input to two separate desks like a front of house mixer and a behind stage mixer then the Splitcom Pro is perfect for the task. Or if you need to combine the signals from two mics - great for saving input space - then the unit can be inverted to do just that. Gain all the options you need for routing your signals for any scenario. The Splitcom Pros low distortion means that you wont lose any signal information - giving you a crisp sound output. Its a great utility for your live set up or studio perfect for low impedance microphone signals. The Splitcoms …

Microphone preamplifier Golden Age Project PRE-73 Jr MKIINo integrated circuits are used in the signal pathMax. microphone gain 70 dBSwitchable High-Pass Filter (off/approx. 40 Hz/approx. 170 Hz)2-stage switchable Air EQ (3 or 6 dB gain at 30 kHz)Phantom power supply: + 48 VSwitchable phaseMicrophone input: XLR/jack 6.3 mm comboHi-Z input for guitar/bass: 6.3 mm jackLine output: XLR/jack 6.3 mm comboDesign: desktop formatIncluding external power supplyColor: Red
Power Supply: Adapter
Inputs: Jack 6,3 mm TS;Kombi XLR/TRS
Made in: China
Outputs: Jack 6,3 mm TS;XLR
Controls: Hi-Pass Filter;Gain;Phantom;Output
Type: DI Box;Preamp
Number of Channels: 1
Package Contents: Adapter
Gain: 70 dB
Rackmountable: …