Amplifiers

Raise your amp off the stage and tilt back for improved monitoring and increased projection. Made in: China Colour: Black Material: Steel Load Capacity: 68 kg

Packaged included: 1 x Audio Power Amplifier 1 x Remote control Specifications: Size: 26 * 29 * 10cm Rated voltage: 220V-240V 50 / 60Hz Rated power: 1200W Peaks: 2000W Rated frequency: 20KH - 20KHz S more→ignal to noise ratio: 90dB Standard impedance: 4 to 16 ohm Type of power amplifier: AV power amplifier Channel: 2.0 channel Total harmonic distortion: ≤ 0.5% Signal input sensitivity: 200mv (± 30mv) Microphone input sensitivity: 9 mv (± 2mv) Recording level output: 1V Auxiliary level output: 1V Support:USB Disk/Max 64GB SD Card(Not included) Colour: Black Features: -Support 4 way microphone input -LED display -2 tack output With EQ -Reverberation, fine tuning, balance, SD, USB interface.

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achi more→eve better performance and reduction ability than a single chip. Plug and play:turn your PC into a HIFI source USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

CE22 stereo enhancer/exciterThe CE22 is a professional multi-band enhancer/exciter designed for various applications. This unit combines 2 processors to align the phase and focus of bass frequencies, more→improve the response of mid-high frequencies and add harmonic content to any "dull" sounding audio. The surround processor utilises the phase alignment engine to give a greater perceived width to the stereo field.Dual/stereo multi-band processorProcess variable between enhancer and exciterDedicated bass processorsSurround processor to add width to stereo fieldAuto noise reduction circuitryBypass switch for processed/unprocessed comparisonBalanced and unbalanced inputs and outputs

This is a nonpowered volume controlling splitter for your sound system. It enables you to run 2 amps with speaker selection, easy to hook up with banana plug connections, and each channel can support more→up to 300W! Features: Supports two power amplifier inputs, four speaker outputs.(4 sets of speakers can be turned on or off independently). Four sets of stereo speakers can sound at the same time, or one or more sets of speakers can be turned off separately, manually select a pushbutton switch. Offers banana plug connections, and each channel supports power up to 300W. Provides 6.5mm earphone output with adjustable volume knob. Signal input provides noload protection of vacuum tube power amplifier …

The A200 is a 320W amplifier with an ultra-small size and weight to integrate in your small and medium installations. The sophisticated and elegant design allows you to install it where it is most con more→venient for you. Take advantage of the aptX HD BT and enjoy the high sound quality with maximum convenience. You can use your A200 down to 4Ω minimum impedance. Gold Plated Binding Posts ensure an excellent conduction of the audio signal and a high-end look to the device. Type: CLASS D Amplifier Frequency Response: 20 Hz - 20 kHz Package Contents: Power Supply;Bluetooth Antenna;Manual Width (cm): 11.7 Controls: Source Select;Volume Power Supply: Adapter Outputs: Binding Posts Power: 160 W THD: …

Brand new NFCA discrete amplifier ▶️ The newly developed NFCA discrete power amplifier reaches a new level of pristine sound processing and reproduction. B200, with its unprecedented 200W performance, more→will bring you pure auditory enjoyment. Three sets of XLR/TRS balanced inputs ▶️ To utilize the balanced composite interface and construct a balanced playback system, ensure the simultaneous use of two B200 units. 200W output power ▶️ B200 has a powerful output power of 200W, which can meet the needs of more kinds of speakers. B200 provides high/low gain options. You can flexibly choose the appropriate gain according to different environments and equipment requirements.

Compact size and metal housing are the outstanding features of this phono preamplifier, so it can achieve long term use and is easy to carry. It comes with two RCA (L and R) inputs, two RCA (L and R) more→outputs and a 1/4 inch TRS output. What this phono preamplifier can offer you is that it can convert phonon signal to line level signal. The phono preamplifier is marked by ultra-low noise audio performance, so it can provide you with excellent sound quality. Made of high quality metal material, this product is firm and durable to use. The length of the product is 10.5cm, the width is 5.5cm, and the height is 4.5cm. It is suitable for home, office, KTV, school, dormitory, etc. Equipped with power …

【The D-class amplifier chip】 adopts the MA5332MS stereo D-class amplifier chip, and the multi chip module provides the same or even higher output power as the single chip replacement, without the need more→for a heat sink, reducing the space occupied by 50%. Equipped with overcurrent, over temperature and under voltage protection. We have used the electronic volume control chip NJW1194 from JRC Corporation in Japan for precise volume control and ultra-low distortion. 【MQA-CD full decoding】will fully unfold MQA music files to provide high-quality sound sources. At this playback level, you will fully hear the content created by the artist in the studio. Only the CD file size allows for high-quality music at…

JBL Mobile Club1KW Mono Subwoofer 1000w Amplifier

▶ Newest AK4493S - The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. ▶ Plug and Play - DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IO more→S, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications) ▶ Discrete LNRD - The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise. ▶ Powerful output - DX1 can

T1 Vacuum Tube Tester. Features: The Product Measures the Cathode Current of the Power Tube for Bias Reading (at Low Voltage Side of the Tubes ). It Can Get the Reading Direct from the Current Meter. more→It Does Not Need Any Convert from MV to MA. It Can Be Work with All Kinds of Multi Meter (Digital Meter or Analog Pointer Meters) , at Range of 100mA or Above. Test EL84 6BQ5 EL34 KT88 7591 7591A 6P14 6L6 6CA7 6V6 5881 6550 KT66 KT100 KT120  Specifications: Maximum Power Per Channel: NO POWER Three Models Available: Model : T1 3.5mm Male Plug Copper Used for Excellent Conductivity. Outstanding Soldering Taken in Every Adapter. Package Included: 1 * T1 Tester 4 * Bias Current Probes 1 * AC/DC A…

Streaming: Bluetooth 5.0 connection possible to listen to music from your mobile phone or tablet. Sound: Maximum power. 180 Watt, high and bass with exceptional clarity. Phono Input: Phono input to more→connect a turntable to your channel without problems. Multimedia: Multiple connection options, headset, CD player, speakers, game console. 2 digital inputs (coaxial and optical) for TV, streaming, internet, DAB radio, computer. 1 USB input, 1 pre-out output for connecting a subwoofer Timeless design: reduced to the most important, black brushed aluminium front plate, large aluminium adjustment knobs.

CNC aluminum shell - Nice appearance,also greatly improved the heat dissipation capacity Chassis Temperature Display - With chassis temperature display, better control sound quality