Amplifiers

Packaged included: 1 x Audio Power Amplifier 1 x Remote control 1 x FM radio antenna 1 x User Manual Features: A set of speakers is a suitable amplifier for small PARTY Two signal inputs: D more→VD signal and AUX signal LINE output, signal output can be connected to active subwoofer or other equipment signal source Center surround output, 5 channels including center one, surround two 115V/230V Power conversion With remote control bluetooth 5.0 With FM radio 5 band EQ mixer Reverberation, fine tuning, balance SD, USB interface, 2microphone inputs. with microphone reverb and delay adjustment Specifications: Model: 608BY Size: 360×70×240mm/6.3x2.8x9.5"

Features: It amplifies the DMX512 signal, with electrical isolation between input and output, prolonging the DMX signal transmission distance and making the transmission more reliable. Comes with 1 in more→put, 1 output directly, 8 independent outputs, avoid the system after the class DMX signal interference and destruction and greatly save your setup time and the use of cable. With 1000V isolation between input and output and between any individual outputs, each interface also has over-current protection, so all of these will maximize the protection of your console and lighting. It is specially designed for connection of DMX512 receivers like dimmers, par lights, moving lights in any club, bar, stage …

Loudspeaker Management System / 19 Inch Size / Processor Type Parametric EQ / Number of Channels 6 / Rack Height 1 RU

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achi more→eve better performance and reduction ability than a single chip. Plug and play, turn your PC into a HIFI source : USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

2-zone Mixer-amplifier + USB/SD/FM/BluetoothMixer-amplifier with 2 separate 120W outputs to 100V or 4/8 Ohms speakers. Inputs for mic, 2 x mic/line and 2 line inputs with an integral USB/SD/FM player more→and Bluetooth receiver can be enabled independently to either of the 2 zones. Mic 1 channel has a variable override and switchable phantom power for use with condenser microphones. Designed for installations where independent paging and audio to 2 separate zones is needed.DetailsPower supply 110-230Vac, 50/60Hz (IEC)Power : output 2 x 120W rmsAudio source USB/SD/FM/BT audio playerInputs 1 x mic (XLR), 2 x mic/line (jack), 2 x line (twin RCA)Zone outputs: line 2 x RCAZone outputs: speaker 2 …

Features: HIGH POWER L-PAD - MONO Brand New High Quality Product Further details about the product, Please read full description

The JBL MA7100HP 7.2 Channel 8K High-Performance AV Receiver transforms your home cinema experience with stunning 8K/60Hz and 4K/120Hz resolution and up to 7.2 channels of surround sound. As the first more→High-Performance model in the JBL MA series it features a low-noise Class D 125W RMS power output and Dirac Live Ready technology for advanced room correction ensuring optimal acoustics in any listening environment.For gaming HDMI 2.1 supports features like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) providing smoother motion quicker response times and reduced input lag resulting in an unparalleled gaming experience. Immerse yourself in Dolby Atmos and DTS decoding for a soundscape …

▶ Newest AK4493S - The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. ▶ Plug and Play - DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IO more→S, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications) ▶ Discrete LNRD - The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise. ▶ Powerful output - DX1 can

1. Adopt TPA3255, QCC3008 Bluetooth 5.0 chip supports APTX, JRC5532 op amp2. The main filter electrolytic capacitor uses 1000UF/50V imported from Japan to ensure strong continuous power support.3. The more→high-current inductance with red-gray ring for audio is adopted to ensure the sound is clear and powerful.4. The PCB adopts 1.6mm thick double-sided board, 2.0 oz copper thickness, and full tinning process to ensure good passing performance of large and small currents. First-class PCB quality.5. The machine adopts an all-aluminum chassis, and the surface of the chassis is treated with wire drawing oxidation coloring process 6. Input : Analog or Bluetooth inputTPA3255 is a high-performance class …

▶️MA12070 x 2 Merus Class D - Each channel of PA3s uses one MA12070 Class D power amplifier chip. The power is shared across 2 chips, the heat dissipation is also halved for each chip, improving relia more→bility and extending the lifespan of the product. ▶️Balanced and Single-ended Inputs - PA3s provides TRS balanced input and RCA single-ended input which can meet needs of different signal transmission. Two inputs are selectable using the front panel button. ▶️High Output Power - The output power of PA3s is enough to drive any bookshelf speakers and even some floor speakers that it could output 80W x 2 @4Ω, 10% THD+N and 65W x 2 @4Ω, 1% THD+N. ▶️D10 Balanced could be the best

The Topping PA5 MKII Class D Power Amplifier adopts a fully balanced structure ensuring a clean powerful audio output. It can deliver up to 65W at eight ohms (THD+N

Double your fun with two channels of active ultra-clean gain. Provides two channels of up to +25dB of ultra-clean gain and optimal impedance loading for dynamic and ribbon mics to perform their best. more→Simply connect one or two dynamic or ribbon mics to the input and connect a mixer or preamp to the output. Great for two mono channels or a stereo configuration. Turns Phantom Power into gain and clarity without passing it through to your delicate ribbon mic. The Cloudlifter allows you to cut through the mix on stage with increased gain before feedback. The Cloudlifter's discrete JFET circuitry preserves the source's natural sound while keeping the direct audio path clear of transformers,

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achi more→eve better performance and reduction ability than a single chip. Plug and play:turn your PC into a HIFI source USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

CE22 stereo enhancer/exciterThe CE22 is a professional multi-band enhancer/exciter designed for various applications. This unit combines 2 processors to align the phase and focus of bass frequencies, more→improve the response of mid-high frequencies and add harmonic content to any "dull" sounding audio. The surround processor utilises the phase alignment engine to give a greater perceived width to the stereo field.Dual/stereo multi-band processorProcess variable between enhancer and exciterDedicated bass processorsSurround processor to add width to stereo fieldAuto noise reduction circuitryBypass switch for processed/unprocessed comparisonBalanced and unbalanced inputs and outputs