Amplifiers

CEQ231 2 x 31-band graphic EQThe CEQ231 is a 19" 2U rack mounted dual 31-band graphic equaliser, which allows the adjustment of labelled frequencies via the individual cut/boost faders. Up to 12dB of cut or boost for frequencies ranging from 20Hz to 20kHz for ultimate EQ control.2 x 31-band 1/3 octave ISO spacingRF filtered servo-balanced inputsConstant Q each bandBypass switch for EQ comparisonLow-cut switch each channelGain control each channelLED VU meters19" rackmount 2U

PA Amplifier | RMS output: 2x 100 W @ 8 Ohm / 2x 150 W @ 4 Ohm | 2 Channels | 2U | 19" rack mountable | Metal | BlackA semi-professional 2x 150 W PA amplifier which fits standard 19” rack cabinets. This amplifier is ideal for advanced DJs, who desire excellent product reliability. A built-in cooler provides good ventilation and a peak level indicator enables control of the output level. For maximum flexibility there is a choice of various speaker connections such as a lockable speaker connector, binding posts or XLR.Details Colour Black Material Metal Power source type Mains Powered Power plug UK Power cable length 1.50 m Power cable side A UK Height 95 mm Power cable …

Signal Processor / 19 Inch Size / Processor Type Graphic EQ / Number of Channels 2 / Rack Height 2 RU

Two-channel amplifier with a power of 2 x 50 W with practical dimensions of 19 x 28 cm. Thoughtful simple solution, ideal for schools, conference rooms, bars and restaurants. Thanks to its sound qualities, it will also appeal to a number of beginning Hi-Fi fans. There are two multifunctional controls on the front panel and a backlit display is located under the black acrylic. In the active state, the display subtly illuminates the black area, in the off state, the forehead is pure black, or with a light point indicating the standby mode. The aluminum bottom of the casing is also a heat sink that dissipates heat from electrical circuits. The internal power supply is provided by a powerful toroidal …

It's all about gain and impedance. While some of the best sounding microphones out there are low-output dynamics and ribbons, pre-amplification can be challenging due to the gain and impedance requirements. Cloudlifters address this by giving passive microphone signals a major inline boost -up to +25db of ultra-clean gain- while properly loading the microphones' transformer for optimal performance. The Cloudlifter CL-1 is completely self contained, driven only by the phantom power from your mixer or preamp. Ideal for dynamics and ribbons alike, the CL-1 turns phantom power into the extra gain required for using passive microphones. The immediate dose of extra gain can make even a budget

TOA A-2030DD audio amplifier 1.0 channels Performance/stage Black

Signal Processor / 19 Inch Size / Processor Type Graphic EQ / Number of Channels 2 / Rack Height 3 RU

DI Box / Desktop / Number of Channels 2

UA Series Compact 100V Mixer-Amplifiers Compact Amplifier in a half width 1U housing, 3 switchable mic/line inputs, an RCA line input and a 3.5mm Aux input. All governed by a front panel volume controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable terminal connector on the rear panel. Supplied with rack-mounting hardware, which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations. PRODUCT FEATURES: Supplied with hardware for rack-mounting 2 units 5 input channels 24V fire alarm mute contacts 100V line or 8 Ohms operation SPECIFICATION: …