Amplifiers

IWA In-Wall Amplifiers with BluetoothStereo amplifier units for background music and public address in a minimalist housing for installation into cavity walls and ceilings. Class-D amplifier design operates cleanly and efficiently with minimal heat dissipation, combined with an internal digital switch-mode power section, which enables easy connection directly from the local mains supply. Bluetooth compatibility enables wireless streaming of audio files from a smart phone or other enabled device in addition to 3.5mm Aux input and an optical digital audio input, ideal for integrating into A-V systems. For discreet and trouble-free installation without any need for table-top or cabinet installation,…

From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage. Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with Built-Like-A-Tank™ construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes. With four models to choose fr…

Lindy TosLink (Optical) and Coaxial Bi-directional Converter

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Type: DI Box
Battery Operation: Yes
UK/EU Power supply included: No
Made in: Germany
Power Supply: 48V Phantom

Whenever you need more headroom for any microphone in your podcast, recording studio or stage setup, the MIC BOOSTER CM-2 is exactly the tool you need to get a crisp and clean microphone signal in a robust and simple to use package. Both channels of the CM-2 can work with almost any dynamic or passive ribbon microphone. Its high-quality preamp adds an incredible +25dB of gain to your mic pre’s which increases headroom and allows you to dial in the perfect mic level at a much lower gain setting at the mixer thus leading to a cleaner sound. The simplicity and size of the CM-2 means you can set it up as close as possible to any mic anywhere in your studio or on stage. This minimizes the risk …

Passive noise eliminator. This device easily removes noise without any signal degradation. It has balanced and unbalanced 6.35 mm TRS inputs and outputs. Frequency response: 10 Hz - 50 kHz. Dimensions: 114 x 73 x 38 mm. Weight: 0.4 kg
Type: Noise Reducer
Made in: China
UK/EU Power supply included: No

The TritonAudio FetHead In-Line Preamp is the perfect pairing with ribbon and low-output dynamic microphones. Although it may be small it is mighty. When connected to your microphone it delivers a clean boost of up to 27dB. This means you no longer need to crank your preamp to achieve the perfect level of gain. Theyll be no more noise or hiss just great sounding recordings! Incredibly easy to install simply connect the FetHead in between your XLR equipped microphone and cable. All the components are housed within a rugged durable chassis that is perfect for protection from superficial damage guaranteeing a long-lasting life. Whether youre on-stage or in the studio rest assured knowing youll …

The Mooer MDI1 Micro DI Box is a direct input box which works by quietly transferring the instruments sound directly into the audio system. The MDI1 is part of Mooers Micro Series that are loaded with plenty of features within a tiny and compact pedal that will easily fit onto even the busiest pedalboards. The MDI Micro DI features incredibly low distortion for a clean and clear signal transfer. With a Cabinet Simulator on-board the Micro DI also allows the use of a virtual 4x12" cabinet for a simulated speaker without the need to carry around a heavy amp. In addition there is also a Ground Lift Switch included for elimination of ground-related noise as well as a balanced and an unbalanced output …

Microphone preamplifier for connecting up to 2 microphones to one line input of a hi-fi system, an amplifier or a mixer. Stereo or 2 x mono, Wide frequency range, Black metal case, Supplied with plug-in PSU.
Battery Operation: No
Made in: Taiwan
UK/EU Power supply included: No
Power Supply: Adapter

The TritonAudio FetHead In-Line Preamp is the perfect pairing with your condenser microphone. Although it may be small it is mighty. When connected to your microphone it delivers a clean boost of up to 18dB. This means you no longer need to crank your preamp to achieve the perfect level of gain. Theyll be no more noise or hiss just great sounding recordings! Incredibly easy to install simply connect the FetHead in between your XLR equipped microphone and cable. All the components are housed within a rugged durable chassis that is perfect for protection from superficial damage guaranteeing a long-lasting life. Whether youre on-stage or in the studio rest assured knowing youll sound great thanks …

Balanced Line Output Switch. Palmer PEABO is a Balanced Line Output Switch with two inputs and one output. Thus, it is the perfect choice for routing a signal to either one of two possible inputs. Switch your vocal mic between the FOH and monitor mixing desk to communicate with the monitor mixer or the band on stage. Two different sound configurations: to switch between different effects or sounds on your microphone, e.g. a "telephone effect" or more levels of reverb. Run the outputs of the PEABO into two channels of the mixing desk, that you can configure differently. Now you can freely toggle between them on-stage at any time. You can also use the PEABO to route the signal to two rooms or …