Amplifiers

The Topping PA7 Plus Class D Power Amplifier is a step up from the PA7 allowing for a more premium audio output. Equipped with two channels this amplifier delivers up to 165W of power to an eight-ohm load; primed and ready to boost most stereo setups. At the heart of the PA7 Plus is the Class D circuit design chosen by Topping for its efficiency and superior performance at this scale. This fully balanced structure reduces noise during transmission and achieves THD+N levels below 0.0003 per cent. The result is a clean and powerful audio output that will elevate your favourite songs. With a dynamic range of 124dB and a frequency response of 20Hz-40kHz the PA7 Plus is suitable for a wide range …

Designed for recording engineers who want an updated take on the classic '73-style unit, the Black Lion Audio B12A mkIII is a single-channel preamp with a warm, creamy, 1970s tone. It's suitable for recording vocals, keyboards, guitars, basses, and more. This preamp gives you a half-rack package, with an XLR connection for microphones and a 1/4" jack for line-level or Hi-Z instruments. The output connection is handled by the 1/4" TRS output on the rear of the unit. Application: Recording UK/EU Power supply included: Yes Type: Preamp Microphone Input: Yes Phantom Power: Yes Rackmountable: Yes Controls: Gain;Phantom;Pad;On/Off Package Contents: Adapter;Manual Made in: China Power Supply: Adapter Battery …

The new NFCA amplifier circuit is specifically designed for portable amplifiers. The low idle power consumption allows for extended battery life. This is done while having 0.00007% THD+N and 135dB SNR. It's powerful and clean enough for power-hungry full-sized headphones and sensitive IEMs. The NX7 can output 180mW of high power under a load of 300 ohms, and with the help of 3 step gain setting, the small body can easily beat the full-sized headphones. It is worth mentioning that even when the output is 200mW, the load distortion is only 0.00008%. The low gain of NX7 is -13.8dB. When used with high-sensitivity in-ear headphones, there will be almost no trouble of potentiometer bias in the

German Infineon's New Silicon Carbide Amplifier Chip Mini handy Design, More Flexible. High quality gold-plated audio connectors Whole aluminum alloy CNC shell. More generous and better heat dissipation Electronic volume control. Eliminate the noise caused by potentiometer. Preset multiple EQ sound mode

CG-10BT Guitar AmplifierClassically styled guitar combo in a vinyl covered cabinet with metal corner protectors and basket-weave style grille cloth. Front control panel is recessed with retro "chicken-head" control knobs and additional features for Gain, Volume and EQ, with an additional Drive boost switch. Custom solid-state circuitry is voiced to produce authentic vintage-style clean and driven tones. BT wireless pairing capability can be used for playing backing tracks for solo practice or just as a playback device. An ideal practice or recording amplifier for electric guitar players.DetailsPower supply 230Vac, 50Hz (IEC)Output 10WrmsSpeaker 165mm (6.5")Controls Gain, Drive, Volume, Treble,…

Compatible with DSD256 and PCM384 - D10s is compatible with 16-32bit/44.1-384kHz and DSD64 - DSD256(support both Dop and Native) XMOS XU208 and Customized Driver - D10s use XMOS XU208 for USB interface and use customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.And use ESS ES9038Q2M to make THD+N as low as 0.0002%@1kHz Automatic Power On/Off - Although the USB port support power after PC has shutdown,D10s still will synchronously power on/off with PC Replaceable OP - It has OP amp socket,DIYer could change the OP amp to get different sound.Notice:D10's electrical parameters will change if use other OP Multiple Applications …

Integrated Amplifier / Stereo / Output power per channel 300 Watt / XLRIn Balanced / 2x S/PDIF IN (RCA Coaxial)

Mini Amplifier / Stereo / Output power per channel 50 Watt / 3.5mm-In / Bluetooth

Ultra-low THD+N :THD+N of E70 VELVET is already lower than 0.00006% (A-weighted), accurately restores the music to every detail. The three senses are one: In addition to product performance, TOPPINIG also pays attention to the convenience of product aesthetic design and controlling. Hearing, vision and touch have been unified on the E70 VELVET. LDAC 24bit/96kHz Bluetooth transmission :E70 VEL VET has the certification of Hi-Res Audio Wireless and L DAC. It uses newest QCC5125 chipset to support LDACIAAC/SBC/aptX/ aptX LL/aptX HD/aptX Adaptive protocol by Bluetooth 5.1. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect it's digital signal to

The Naim SuperNAIT3 High-End Integrated Amplifier deliver 80W of power through two channels at eight ohms offering a stunning stereo sound. The class AB amplification balances high efficiency with distortion-free audio providing you with a reliable base for your hi-fi system. The power transistors feature ceramic insulators providing efficient heat dissipation and excellent electrical insulation for consistent performance. The microphonic-isolating PCB mounts are also on hand to reduce unwanted vibrations and minimise interference resulting in an immersive sound. With five analogue inputs you can build out a dynamic audio system and create an immersive soundstage. The MM phono input lets you …

Supports Dolby Atmos up to 5.1.2 Channels (Speakers Included) Pure Driving Power from Discrete Amp Technology Simple Rear Panel Layout for Easy Connection Phase-Matching Bass Boost for Deep Bass and Clear Mid-Range Bluetooth Wireless Audio Streaming

Jaw-dropping, room-filling sound with advanced acoustics powered by computational audio. Seamless integration with Spark App. Bluetooth speaker, audio interface, rechargeable battery and headphone/line out.Play whenever and wherever you feel like it with this app-supercharged tiny beast. We’re talking seamless integration with the Spark App chock full of amps, pedals, Auto Chords, Smart Jam, 50,000 tones on the cloud, and so much more.It’s easy to create your own tones, or download over 50,000 tones from the ToneCloud community. Get chords for millions of songs. Use AI-powered Smart Jam to learn and jam along with you, and much more. Spark GO comes stocked with 33 amps and 43 effects …

Mini Amplifier / Stereo / Output power per channel 25 Watt

ES9068AS DAC Chip--- E50 uses the latest high-performance DAC chip ES9068AS. Our excellence in design and engineering provides realistic and transparent sound quality. The sound quality is good enough for all kinds of applications--- With the help of careful design and adjustment, E50 provides a distortion as low as 0.00009% and a dynamic range of 126dB, providing you with perfect sound quality. This also makes E50 suitable for applications: high-fidelity PC-HIFI system, mobile phone/tablet OTG, CD player/turntable external DAC, digital broadcasting external DAC, TV DAC, and so on. Ultra-low jitter for USB inputs, jitter is no longer anxious--- Using CPLD to process the clock and greatly

Supports high-resolution audio: The E30 II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD

ROHM flagship DAC chip BD34301EKV, Fully optimized its performance, making its THD+N as low as -117dB! Built-in linear power supply composed of british porcupine toroidal transformer. Coordinate multiple low-noise regulated power supplies to provide a stable, reliable, efficient and low-noise power supply system. CK-03 clock processing circuit, the new self-developed CK-03 clock processing circuit greatly reduces clock jitter. Specially designed discrete component regulated power supply and multiple low noise regulated power supplies. Provides low noise power supply for analog circuits. Faster and more stable reception. Support LDAC(24bit/96kHz), APTX/HD, SBC, AAC!

PA Amplifier | RMS output: 2x 100 W @ 8 Ohm / 2x 150 W @ 4 Ohm | 2 Channels | 2U | 19" rack mountable | Metal | BlackA semi-professional 2x 150 W PA amplifier which fits standard 19” rack cabinets. This amplifier is ideal for advanced DJs, who desire excellent product reliability. A built-in cooler provides good ventilation and a peak level indicator enables control of the output level. For maximum flexibility there is a choice of various speaker connections such as a lockable speaker connector, binding posts or XLR.Details Colour Black Material Metal Power source type Mains Powered Power plug UK Power cable length 1.50 m Power cable side A UK Height 95 mm Power cable …

Power Amp / Stereo / Output power per channel 480 Watt