Amplifiers Palmer

The Palmer 20 Channel Press Patch Box is a thoroughly professional patch box and signal splitter which allows you to get 20 professional grade balanced audio signals from 1 input. The Palmer Press Box has been specially designed for use at press conferences and has many features to make it perfect for this application. The 20 outputs have their grounds isolated by superior Palmer transformers each with an individual ground lift switch allowing for unparalleled audio consistency across the 20 channels even when dealing with a variety of output destinations. The Press Patch Box can also effectively handle a variety of signal sources thanks to the microphone and line level inputs along with ample …

10 channel audio splitter for press conferences and other applications. On a transformer split basis, one line input is split out to ten outputs. All inputs and outputs are balanced transformer isolated. Line input and outputs. Adjustable input gain (-8 to +25dB). Level meter. Headphone output to monitor the input level, headphone volume adjustable. Individual ground lift. switches for each output. Ground Lift switch for the input. Expandable setup thanks to the Bus In/Out sockets. Dimensions: 480 x 165 x 44.5 mm (19" x 1 U). Weight: 4.18 kg. In a black finish.
Power Supply: 240V
Type: Isolator;Splitter
UK/EU Power supply included: Yes
Made in: Germany

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

Passive 8-channels 19" DI Box. Through the special MERGE LINK/IN function, the front LINK output can be used as a second input.The signal is then mono merged with the one from the INPUT jack through to the output. Thus, the PAN16 offers a maximum of 16 inputs. Two PAD buttons enable an attenuation of 10, 20 or 30 dB. The XLR outputs are electrically isolated and balanced via transformer. 8 additional LINK-sockets are also available on the rear panel of the device. Dimensions: 480 (19") x 200 x 45 mm (1 U), Weight 2,39 kg
UK/EU Power supply included: No
Type: DI Box
Rackmountable: Yes
Made in: Germany

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

Joe Bonamassa Signature Model Guitar Speaker Simulator DI. The PDI 03 JB Speaker Simulator is a professional passive DI box for guitar amps. Providing a frequency compensated, transformer balanced direct feed to mixing consoles or soundcards it connects between the amplifier output and loudspeaker or equivalent dummy load. The PDI 03 JB has been developed for live, studio and home recording applications to eliminate the need for time consuming mic placement and mic-related problems. Designed to Joe Bonamassa's high standards for a huge but tightly focused tone the exclusive JB switch brings the output signal to the fore and takes it "right in your face." The PDI 03 JB's dual speaker simulation …

The Palmer Pan 03 4 Channel Passive DI Box is a professional 19" rack mount DI with all the features a sound engineer would need from a DI box. The Pan 03 includes 4 channels each consisting of a 6.3mm mono jack input balanced XLR output along with both a jack and XLR parallel output connector. The Pans variety of connections make it quite a versatile DI solution. The DI Box also mounts easily into any 19" rack case taking up only 1U of space and weighing just 1.6kg the Palmer Pan 03 is easy to use and store in a rack set up. Palmers high quality transformers allow for excellent tone and great dynamic range in all of their DI equipment.

2-Channel Phantom Power Supply. Palmer Pan 48 is a unit for the external power supply of phantom powered appliances. Due to the high current level of a maximum of 20mA, the application is not just limited to condenser microphones. PAN 48 is excellent for supplying phantom powered active DI-boxes. The box has two channels. Specifications: 2 channels, each channel: Microphone input: XLR/f Pin 2 & 3 +48VDC, Pin 1 Ground Output: XLR/m no DC voltage Ground lift switch Phantom power stabilized ±5%. Low ripple, low noise Max. current 20 mA totally. LED control. Metal casing. Power Supply included. Dimensions: 120 x 115 x 45 mm, Weight: 0,68 kg.
Made in: Germany

Active 2-channel DI Box. The Palmer PAN04A 2-channel DI box allows you to feed the unbalanced hi-Z signals of electric instruments to the microphone inputs of a mixer. It delivers a transformer balanced lo-Z signal at the outputs and helps eliminate hum and interference caused by ground loops. The active circuitry preserves frequency response and provides increased dynamics. The unit also features a 1/4" direct out and switchable -30 dB pad on each channel. An additional balanced XLR output merges both input signals to mono, e.g. for summing the L and R channels of a stereo instrument. With its tough construction, the PAN04A is equally suitable for stage and studio use. It operates on any standard …

The Palmer Balun Line Isolation Box allows for both balanced and unbalanced signals to have their ground sources isolated and reliably eliminates ground loop hum. Using TRS Jack input and outputs and superior Palmer transformers the Balun can effectively isolate any combination of balanced and unbalanced stereo or mono signal sources making it a very versatile line isolation box. The Palmer Line Isolation Box also features screw holes and can be easily mounted to a permanent fixture.

DI Box / Desktop / Number of Channels 1

It may be designed for electric guitars but the Palmer Duetto Nano Mixer can do much much more!

Balanced Line Output Switch. Palmer PEABO is a Balanced Line Output Switch with two inputs and one output. Thus, it is the perfect choice for routing a signal to either one of two possible inputs. Switch your vocal mic between the FOH and monitor mixing desk to communicate with the monitor mixer or the band on stage. Two different sound configurations: to switch between different effects or sounds on your microphone, e.g. a "telephone effect" or more levels of reverb. Run the outputs of the PEABO into two channels of the mixing desk, that you can configure differently. Now you can freely toggle between them on-stage at any time. You can also use the PEABO to route the signal to two rooms or …

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Type: DI Box
Battery Operation: Yes
UK/EU Power supply included: No
Made in: Germany
Power Supply: 48V Phantom

Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Channels:1, Inputs: 1, Input connectors: 6.3 mm Jack, Max. input level: + 54 dBu. Input impedance:
Made in: Germany
Type: DI Box
UK/EU Power supply included: No