Amplifiers

✅ FULL MQA DECODING - Native DSD (up to DSD512) and full MQA decoding up to 384kHZ ON POWERFUL 16 - core XMOS processor
✅ ULTRA RES AUDIO - Ultra - res PCM up to 32- bit / 768kHz via USB or 192kHz via optical or coaxial and Advanced 96kHz Bluetooth 5.1 + module with QCC5100 chipset supports various HD formats including aptX HD, aptX Adaptive, LDAC and HWA / LHDC.
✅ MULTIPLE CONNECTIONS - Balanced (4.4mm Pentaconn) and S - Balanced (3.5mm) analogue inputs and outputs. Built - in iEmatch and auto - gain technology automatically adjusts output to suit headphones / IEM sensitivity.
✅TECH PACKED - With technology like: XBass and xSpace settings, balanced circuit design with OptimaLoop multi - …

QP1600 quad power amp 4 x 400W

A range of quad power amplifiers with 4 fully independent channels and individual volume controls. Fully balanced line inputs and parallel outputs allow signal daisy-chaining to further amplifiers. Designed as a cost effective and efficient solution for multi speaker installations where sound quality is paramount.
Fully balanced signal path
Stable down to 2 Ohms
2U rack-mountable
Power rms @ 8 Ohms - 4 x 200W
Power rms @ 4 Ohms - 4 x 300W
Power rms @ 2 Ohms - 4 x 400W
Weight - 22kg
Fuse rating - F8A

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Made in: Germany
UK/EU Power supply included: No
Type: DI Box
Battery Operation: Yes
Power Supply: 48V Phantom

The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.
Made in: China
Number of Input Ports: 2
Number of Outp…

DI Box / Desktop / Number of Channels 1

The Tangent DAC II a high-end hi-fi DAC is equipped with a Sabre ES9023 24-bit Stereo Audio DAC. It has multiple digital inputs like coaxial optical digital and USB as well as the latest AptX Bluetooth technology for efficient wireless streaming. Further functionality includes the use as a headphone amplifier. With both RCA and XLR balanced outputs it pairs well with Tangents PowerAmpster II or other power amplifiers. Its sturdy construction and built-in power supply ensure durability and safety during use. The DAC II is designed for convenience with an intuitive interface and compact design. It suits music enthusiasts desiring top-tier sound quality or those intending to enhance their audio …

RMS-series Multi Zone 100V Amplifiers


The RMS605 is a Multi-channel slave amplifier with 5 x 60W outputs for 100V, or 4-16Ohm speakers.
Each amplifier channel has its own independent line input, which can be switched to a global auxiliary, providing the option of the same input to several of the amplifier channels if required.
Paging microphone input is always live to all channels for voice alerts, and a 24V mute terminal can be connected to an alarm panel for emergency evacuation override.
Class D circuitry design and efficient toroidal transformers have enabled for a design which fits into a 1U rack-mount housing.
The RMS605 can be applied as a high power slave amplifier or equally …

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

The HT-5R MK III takes the revered design from the award-winning MkII series to new heights with incredible performance, gorgeous looks and game-changing new features from improved voicings to the addition of IR-based CabRig™ speaker simulator software.Valve amps sound best when cranked; the unique feel, dynamics and natural compression of a valve power stage running hot is widely considered the holy grail of guitar tone. The problem is turning your 100W valve amp up to these volumes is neither practical for yourself, nor your neighbours. HT-5R MK III, with its unique push-pull power amp, gives you this coveted valve performance at volumes suitable for home practice and recording.The HT-5R …

switchable boost/cut ranges of ±6 or ±12 dB, 4-segment LED ladders for monitoring output levels, front panel bypass switch, dynamic range of greater than 108dB, 1/3-octave Constant Q frequency bands, XLR and TRS Inpts and Outputs, frequency Repsonse of 50kHz, ±12 dB input gain range, 19"/1U
Made in: China
UK/EU Power supply included: Yes
Type: Equalizer;Boost
Power Supply: 240V

The Astell&Kern ACRO CA1000T Headphone Amplifier & DAC is a completely portable all-in-one system for headphone enthusiasts. A cornucopia of connectivity options are available for inclusion in audiophile-grade desktop systems with inputs and outputs that cover links from source to speaker. Monitor everything from the comprehensive LCD touchscreen and hear the difference.The CA1000T uses advanced decoding support ES9039MPRO dual-DACs and a Twin Triode KORG Nutube tube design to maximise your listening experience with high-resolution conversion capabilities. Through sensitive in-ear monitors power-hungry headphones and everything in between find the joy in crisp dynamic listening.