Amplifiers

All-tube 10W guitar combo amplifier from AC10 Custom series that is a reproduction of the original AC10, one of the first amplifiers to bear the VOX name that has long been adored for his ability to a more→chieve rich, articulate tube tone at very manageable volumes. More portable than the AC15 and more powerful than the AC4, the combo features the classic Top Boost tone circuit that provides an array of classic and modern tones. Now equipped with reverb and a master volume, it is the perfect companion for the home, studio or stage. The Top Boost tone can be further adjusted via Gain, Bass, Treble, Reverb and Volume controls. The combo is equipped with two 12AX7 and one EL84 tube, and a 10” Celestion VX…

Focusrite Scarlett OctoPre is an 8-channel microphone preamplifier and AD / DA converter with ADAT digital interface. The second generation of microphone preamps operates at 24 bit / 192 kHz and offer more→s a dynamic range of up to 109 dB. Two analog inputs located on the front panel are capable of handling microphone, line or direct instrument (Hi-Z) signals. OctoPre is the ideal studio accessory for extending the connectivity of Scarlett Sound Cards and other ADAT-enabled devices. The converter is designed for rack installation, where it occupies one height unit.

The Scarlett OctoPre features eight analogue inputs with combined XLR / TRS connectors. Each input channel has a volume control and …

Active 2-channel DI Box. The Palmer PAN04A 2-channel DI box allows you to feed the unbalanced hi-Z signals of electric instruments to the microphone inputs of a mixer. It delivers a transformer balanc more→ed lo-Z signal at the outputs and helps eliminate hum and interference caused by ground loops. The active circuitry preserves frequency response and provides increased dynamics. The unit also features a 1/4" direct out and switchable -30 dB pad on each channel. An additional balanced XLR output merges both input signals to mono, e.g. for summing the L and R channels of a stereo instrument. With its tough construction, the PAN04A is equally suitable for stage and studio use. It operates on any standard …

Collaboratively designed by the EVH team and led by renowned amp engineer, James Brown, the 5150® Iconic® Series 15-watt 1x10 combo has a 6L6 power tube voiced by a complex, multi-stage hybrid more→preamp section anchored by a pair of ECC83 tubes, providing all the muscle you need for a modern-day practice amp. The cabinet features special internal plywood baffling for tight and increased bass response, and houses a custom-designed EVH 10” Celestion® speaker voiced specifically for this preamp circuit, so that the pristine cleans and searing high gain tones are tight, clear and articulate.Punching above its weight, this combo features two channels with an extra voicing on each for …

US Series Compact 100V Slave Amplifiers100V slave amplifiers built into a half width 1U housing. In addition to RCA line input and output, the US amplifiers have a 100V input on removable screw termin more→als, which enables the amplifier to be connected in parallel with existing 100V speakers to extend the system. Mono output to either 100V line or an 8 ohm speaker load is connected via a separate removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.DetailsPower supply 170-264Vac, 50Hz (IEC)Inputs Line (RCA),…

Dual-channel phantom power supply for microphones. The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a ru more→gged, compact, and portable unit. Innovative low power circuitry generates the higher voltage necessary for powering microphones while maximizing battery life. Features 2 XLR inputs and 2 XLR outputs, and 7,5 - 12 V AC/DC input. Can be powered with an external power supply or 9 V battery. Dimensions: 48 x 117 x 99 mm. Weight: 0,37 kg.
Made in: China

Hi-Fi stereo amplifier. Bluetooth receiver. USB/MP3 player. FM radio. Echo microphone inputs. Digital audio input to connect to a TV. Aluminium panel. Remote control for player. POWER: 230 V AC, 350 W more→, RESPONSE: 20-20,000 Hz, S/N RATIO: >85 dB, DISTORTION: Harmonic: < 0.5% at 1 kHz, INPUTS: 3 stereo aux: DVD/AUX/CD, 2 x RCA, 17,000 Ω 300 mV RMS, 1 stereo aux, 3.5 mm jack, 15,000 Ω 300 mV RMS on front panel, 1 digital audio, TOSLINK and RCA, 2 balanced mics, 6.3 mm jack, 900 Ω 9 mV RMS, OUTPUTS: Speakers: Main L/R, 4-16 Ω screw or banana terminals, PROTECTION: Temperature, short circuit and overload
Power Supply: 230V
Inputs: AUX;Jack 3,5 mm;RCA;Jack 6,3 mm (MIC/Line)
Width (cm): 33.0
Type: Amplifier
Battery Operation: No
Signal to Noise Ratio: 70 dB
Impedance: 16 Ohm
Power: 120 W
Number of Channels: 2
Colour: Black
EQ: No
Frequency Range: 20 Hz - 20 kHz
WiFi: No
Package Contents: Power Cable;Manual
LAN: No
Depth (cm): 27.6
Net Weight (kg): 4.2
Radio: FM
Height (cm): 9.2
SD Slot: No
Made in: China
Microphone Input: Yes
Outputs: …

The IOTA VX AVXP1 is a seven-channel Class AB power amplifier ably suited for high power home cinema and capable of delivering a 110W RMS output (8Ω all channels driven). A joy to audio enthusiast more→s this amp is rated at ≤0.06 THD+N (A-weighted) with ≥105dB and ≥110dB SNR (balanced and unbalanced respectively) introducing minimal divergence from the input signal of your processor whilst still delivering ample power thanks to its high output toroidal transformer.The AVXP1 can be effortlessly integrated into your separates HiFi system and works especially well as companion to IOTA VX processors with ports for both 12v trigger and front panel dimmer synchronisation …