Amplifiers

The Naim CI-Uniti 102 Streaming Amplifier is an all-in-one solution for home or commercial audio installations supporting services like Tidal Spotify and AirPlay 2 allowing you to enjoy high-quality music from any source. The ultra-quiet built-in amplifier delivers 150W at eight ohms ensuring powerful sound without distortion even at loud volumes. Versatile connectivity options include HDMI eARC Bluetooth S/PDIF and analogue inputs making it easy to integrate into a range of entertainment setups including TV. The two independent RCA outputs enable you to connect subwoofers or create separate audio zones providing flexibility in your setup. Plus the Naim CI-Uniti 102 is rack-mountable and supports …

Mono class D PA mixing amplifier, 1 x 1,000 W. Class D concept with PASCAL amplifier module. Energy-efficient concept due to high efficiency. Lightweight design due to compact switch-mode power supply. Silent operation due to fanless cooling concept. 4 balanced mic/line inputs. Mic 1 with priority circuit and automatic talkover. Additional connection for desktop microphone via screw terminal. 1 aux input, speaker outputs via screw contacts, line output. Insert facility, e.g. for effect units, equalizers, feedback controllers. Input level control and output level control. 2-way tone control for the output. 48 V phantom power supply for each microphone input, to be activated individually. Limiter …

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play, turn your PC into a HIFI source : USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

Customized Thesycon driver + XMOS XU208 + ES9018K2M + OP Maximum support DSD256, PCM384kHz/32bit Orange indicator of format & sampling rate Auto on/off

DI Box / Desktop / Number of Channels 2

Packaged included: 1 x Audio Power Amplifier 1 x Remote control Specifications: Size: 26 * 29 * 10cm Rated voltage: 220V-240V 50 / 60Hz Rated power: 1200W Peaks: 2000W Rated frequency: 20KH - 20KHz Signal to noise ratio: 90dB Standard impedance: 4 to 16 ohm Type of power amplifier: AV power amplifier Channel: 2.0 channel Total harmonic distortion: ≤ 0.5% Signal input sensitivity: 200mv (± 30mv) Microphone input sensitivity: 9 mv (± 2mv) Recording level output: 1V Auxiliary level output: 1V Support:USB Disk/Max 64GB SD Card(Not included) Colour: Black Features: -Support 4 way microphone input -LED display -2 tack output With EQ -Reverberation, fine tuning, balance, SD, USB interface.

High-end audio - TOPPING DX3 Pro+ is a high-performance DAC with USB, Optical, Coaxial, Bluetooth input, Line Out and headphone amplifier output. About Topping DX3 Pro+ - Equipped with the latest QCC5125 chip, it supports LDAC / AAC / SBC / APTX / APTX LL / APTX HD protocols. It uses the ES9038Q2M decoder, supports high-resolution music transmission, and can be played back with clear sound. Bluetooth 5.0 - Connect the Bluetooth of the phone, tablet or notebook to DX3Pro+, and connect the power amplifier, active speakers or headphones to the DX3Pro+'s output, then DX3Pro+ becomes your Bluetooth Headphone amp 1 Bluetooth DAC. You can easily enjoy the high quality music and convenience

Integrated Amplifier / Stereo / Output power per channel 35 Watt / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

Headphone Amplifier / Total Connected Load 40 W / Number of Channels 1

600W 1.8-30MHz HF Power Amplifier HF RF Amplifier Board SSB HF Amp Board for Shortwave Radio DIYFeatures:- Frequency: 1.8-30MHz- Input power: 1-5W- Maximum output power: 600W- Voltage: 12V+53V- Current: 12V (1A); 53V (15A)- Static voltage: 2.7V- Quiescent current: 300mA+300mA- Net weight: 276G/0.6LB- Board size: 138 x 88 x 40mm/5.4 x 3.5 x 1.6" (LxWxH)Package Included:- 1 x HF Power Amplifier

The JBL MA510 5.2 Channel AV Receiver is a step up from the MA310 model thanks to its support for both 8K/60Hz and 4K/120Hz visuals. The four HDMI 2.1 inputs let you relish ultra-high-definition video providing an incredibly detailed and lifelike picture. This AVR even features HDR10+ and Dolby Vision technologies for enhanced brightness contrast and colour accuracy. The receivers efficient Class D amplifier produces 75W of power to 5.2 channels providing a low-noise sound to your audio sources. For gaming HDMI 2.1 technology in the MA510 supports Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) providing seamless gaming experiences with reduced input lag and screen tearing. VRR …

Foldable amplifier stand that can hold monitor speakers, amplifiers or other equipment to a maximum weight of 35 kg without a problem. The angled tube front legs with cross braces have significantly improved the stand's stability and strength. The low centre of gravity ensures even larger amps are securely displayed. The fine adjustment on the supporting leg allows a tilt between 15° and 28°. The stand is made of steel and the support arms are covered with non-marring rubber for better protection of the equipment. A microphone can be attached to the telescopic tube using a boom arm with a thread of either 3/8'' or 5/8''. Adjustable height: 570-990 mm. Folded size: 122 x 86 x 602 mm. Support de…

Preamplifier for MM turntables powered by an external switching power supply (included). Allows the turntable to be connected to devices without special Phono input. High-quality design for perfect noise reduction. High-quality, long-lasting components are used. Quality, steady sound. Technical parameters: Rated input impedance:> 47 kOhmNominal load impedance: ≥ 22 kOhmTHD distortion:

Features: - Support 4 way microphone input - LED display - Tack output With EQ - Reverberation, fine tuning, balance, SD, USB interface. Specifications: Model: 325BT Size: 26 * 29 * 10cm Rated voltage: 110-240V 50 / 60Hz Rated power: 1200W Peak: 2000W Rated frequency: 20KH - 20KHz Signal to noise ratio: 90dB Standard impedance: 4 to 16 ohm Type of power amplifier: AV power amplifier Channel: 2.0 channel Total harmonic distortion: ≤ 0.5% Signal input sensitivity: 200mv (± 30mv) Microphone input sensitivity: 9 mv (± 2mv) Recording level output: 1V Auxiliary level output: 1V Support:USB Disk/Max 64GB SD Card(Not included) Color: Black Packaged included: 1 x Audio