Amplifiers

Q600 Series Stereo Power Amplifiers Stereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers. 6.3mm jack or RCA inputs SPK, 6.3mm jack or 4mm post outputs Fan cooled 19" rack-mountable (2U) Power supply 230Vac, 50Hz (IEC) Frequency response 20Hz - 20kHz Input connectors 6.3mm jack, RCA (L+R) Input sensitivity 775mV, 10k Ohms S/N ratio >98dB …

Parameters: The latest version, supports LDAC, HD, AAC, at the same time, supports Android and , LDAC supports 24BIT94K transmission and can be compatible at the same time! Truly lossless transmission, the same level of sound quality as CD! LDAC can reach up to 990kbps. -X HD maxes out at 576kbps. 5.0 Bluetooth CSR8675+PCM5102A decoding, support LDAC, HD. True 5.0 module. The PCM5102 decodes independently and adopts the I2S protocol transmission, which is much the Bluetooth playback board without decoding output. The decoding further improves the sound quality and resolution. Not comparable to general toy-level bluetooth audio output. The signal-to-noise ratio is 112db, and the 2.1V RMS audio …

The AL200 is capable of direct sampling of PCM digital audio up to 32bit/ 768kHz without the need to downsample. It also supports native DSD playback up to DSD 256 without conversion. On the front panel, a 6.35mm TRS headphone jack is provided, capable of delivering significant power output. The volume control for headphones and passive speakers are separate, adjusting one will not affect the other. For the first connection of AL200 via Bluetooth, you need to pair it with your smart device. Subsequent connections will be automatically established within a few seconds after switching to Bluetooth input or turning on the device. When switching from Bluetooth input to other inputs, playback will …

A-30 + Wi-Fi & Bluetooth 5.0 Stereo amplifier with Multi-Room 2x35W support. Supported Formats: ALAC;MP3;APE;AAC;WAV;FLAC Width (cm): 13.1 Sample Rate: 192 kHz / 24 bit Signal to Noise Ratio: 91 dB Inputs: 3,5 mm Jack;Micro USB Power: 35 W;18 W Colour: Grey Impedance: 8 Ohm;4 Ohm Net Weight (kg): 35.0 WiFi: Yes LAN: Yes Bluetooth: Yes Outputs: Speaker OUT Depth (cm): 8.5 Remote Control: Mobile Application;Yes Made in: China USB: Yes Height (cm): 2.7 Type: Multiroom Amplifier Streaming Platform: Spotify;Qobuz;Internet radio;Deezer;Tidal;Napster;Amazon Music Frequency Response: 20 Hz - 20 kHz

The JBL MA9100HP is the pinnacle of JBLs MA series AV receivers perfect for premium home cinema setups with stunning audio and video performance. This 9.2-channel AVR delivers a powerful 140W RMS per channel suitable for larger rooms and more powerful speaker setups. As one of the two High-Performance models in the range its also Dirac Live Ready ensuring you can fine-tune your system for optimal acoustics in any room. Gamers will appreciate the HDMI 2.1 support offering features like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) for smoother gameplay quicker response times and reduced input lag.Enjoy immersive Dolby Atmos and DTS:X decoding ensuring support for lifelike spatial …

【High Performance DAC AMP Chip】: The SMSL AO300 uses the MA5332MS power amplifier chip, the CS43131 decoding headphone amplifier chip, and the NJW1194 Volume Control Chip. These cutting-edge chips have been designed to deliver exceptional audio performance, with minimum distortion and interference. It supports MQA and MQA-CD decoding and restores the sound of the recording studio. 【2.1 Channel Audio Amplifier System】: The stereo amplifier features a 2.1-channel active audio system with subwoofer output, delivering an output power of 165W x 165W. This system has been carefully designed to provide an immersive audio experience with deep bass and rich sound quality. Bluetooth 5.1 also

Mini Amplifier / Stereo / Output power per channel 50 Watt / 3.5mm-In / Bluetooth

Sleek decora finish: The sleek decora finish seamlessly blends in with your room's decor. Clean, refined sound: Your audio is delivered clean and refined thanks to the system's ultra-low total harmonic distortion (1 watt@1kHz into 8 ohm). Versatile playback choices: The amplifier includes USB, microSD card, Bluetooth, FM radio, and line level AUX inputs. It supports wav, mp3, wva, ape, flac, aac, aiff, and wma digital audio formats. Flexible control: All system controls are at your fingertips with the on-face control buttons or with the included wireless IR remote control. All system controls are at your fingertips with the on-face control buttons or with the included wireless IR remote …

6-separate headphone amplifiers 1-input solo per amplifier switchable to the common main input Main input with low/high selector switch for matching the input signal Inputs: solo stereo 6 x 6.3 mm jack Outputs: headphones stereo 6 x 6.3 mm jack