Amplifiers

You can connect D10 Balanced to your amplifier/headphone amplifir's input to make D10 Balanced one part of your HIFI system. D10 Balanced will greatly improve sound quality in case playing high resolution files. D10 Balanced is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256 Native D10 Balanced will synchronously power on/off with PC. D10 Balanced supports professional ASIO applications. When using ASIO in MAC or Liunx, it can be set in the music playback software. when using ASIO with Windows, you can use the customized driver from Thesycon. D10 Balanced can accurately indicate the audio format (PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not

【High Performance DAC AMP Chip】: The SMSL AO300 uses the MA5332MS power amplifier chip, the CS43131 decoding headphone amplifier chip, and the NJW1194 Volume Control Chip. These cutting-edge chips have been designed to deliver exceptional audio performance, with minimum distortion and interference. It supports MQA and MQA-CD decoding and restores the sound of the recording studio. 【2.1 Channel Audio Amplifier System】: The stereo amplifier features a 2.1-channel active audio system with subwoofer output, delivering an output power of 165W x 165W. This system has been carefully designed to provide an immersive audio experience with deep bass and rich sound quality. Bluetooth 5.1 also

Mighty Bass 50BTMighty Bass 50BT is a compact bass amplifier for rehearsal and session work with a host of internal features for the bass guitarist.Incorporating the proprietary TS/AC technology and Impulse Response modelling, a wide range of amplifier and speaker types are at the player's disposal that belie the cabinet's compact dimensions. For rehearsal, the Mighty Bass 50BT has a 50W class D power amplifier to cut through and deliver full bass response to the custom 6.5" speaker unit. A full arsenal of built-in effects and amplifier settings can be edited onboard or via Bluetooth using the NU-X MightyAmp app for ios or andriod, and saved to the 3 internal channels. Bluetooth can also stream …

Class D amplifier providing 150 watts/channel (RMS) into 8 ohm loads or 225 watts/channel into 4-Ohm loads Bridgeable output provides 450 watts into a single 8-ohm Load 4-Pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire Built-in thermal and short circuit protection circuits Includes rackmount ears

Headphone Amp / Max Sample Rate 768 kHz / Bitrate 32 bit / Bluetooth

Digital-to-Analogue Converter / Stereo / Output power per channel 100 Watt / Bluetooth

The Topping PA7 Plus Class D Power Amplifier is a step up from the PA7 allowing for a more premium audio output. Equipped with two channels this amplifier delivers up to 165W of power to an eight-ohm load; primed and ready to boost most stereo setups. At the heart of the PA7 Plus is the Class D circuit design chosen by Topping for its efficiency and superior performance at this scale. This fully balanced structure reduces noise during transmission and achieves THD+N levels below 0.0003 per cent. The result is a clean and powerful audio output that will elevate your favourite songs. With a dynamic range of 124dB and a frequency response of 20Hz-40kHz the PA7 Plus is suitable for a wide range …

▶ Newest AK4493S - The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. ▶ Plug and Play - DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications) ▶ Discrete LNRD - The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise. ▶ Powerful output - DX1 can

Flagship achievement flagship :D90LE uses ESS SABRE ES9038PRO, with 32bit Hyperstream architecture, achieves ultra-high performance in the audio field. Each channel of the D90LE will be arranged in parallel by 4 conventional balanced channels. This makes theperformance of D90LE even better. Bluetooth 5.0 LDAC transmission: D90LE has the certification of Hi-Res Audio Wireless and LDAC. It uses CSR8675 chipset to support LDACIAAC/SBC/APTX/APTX LL/APTX HD protocol.To get even better sound quality from Bluetooth, we abandon the built-in DAC of CSR8675 and connect it'sdigital signal to ES9038PRO to decode. We use CPLD to process the clock and greatly optimize the digital signal, so that

Two ES9039SPRO Chips - Each of the left and right audio channels independently utilizes an ES9039SPRO, providing higher SNR (135dB) , greater dynamic range, and lower distortion (

Super audio reproduction ability with ultra low distortion The E70 uses ESS SABRE flagship DAC ES9028PRO. ES9028PRO has a 32-bit 8-channel HyperStream I1 architecture. In the application of E70, every 4 channels are connected in parallel as one channel,achieving high performance and high sound quality at the same time. Brand new IN conversion A brand new IN conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion,lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip. LDAC 24bit96kHz

Switch: Control a pair of speakers from either a stereo amplifier or a surround amplifier - easily convertible without cables. Multifunctional: The switch also offers the possibility to switch to 2 different pairs of speakers with 2 amplifiers. Safe: The high-quality rotary switch with zero position protects the connected devices - deep high-quality banana sockets provide the cables with a secure hold. Sound: Due to the increased cable cross section, the AMP-S Pro offers optimal signal transmission without distorting the sound of the system. Quality: The AMP-S Pro has a sturdy metal housing and a 4mm thick aluminium front plate in brushed finish.

Amplifiers for installations

CNC aluminum shell - Nice appearance,also greatly improved the heat dissipation capacity Chassis Temperature Display - With chassis temperature display, better control sound quality

Digital-to-Analogue Converter / Max Sample Rate 384 kHz / Bitrate 32 bit / Bluetooth